1 / 1
Descripción
The M2 drive provides the power of two drives in one! Now with one DC drive, you can control two different DC motors either independently or in a ratio mode. In independent mode, each side of the M2 can be controlled differently with different trimmer pot settings and different speeds. In speed ratio mode, one speed potentiometer sets the main speed while the other one determines the ratio of the speeds between the motors. In this mode, the drive replaces two single drives and possibly a separate master/follower card too resulting in extreme cost and panel space savings The M2 drive is easy to set up with simple jumpers to choose the modes speed/torque, independent/ratio and coast/decel to stop. In speed mode where speed is controlled, the external potentiometer sets the speed reference signal and the current limit trimmer pot sets the current limit. In torque mode, the external potentiometer sets the torque reference and the current limit trimmer pot sets the runaway speed limit. Set up parameters are easily adjusted with onboard trimmer pots. For OEMs that have fixed settings, the M2 drive is microprocessor based and can have the settings or ranges of the trimmer pots and other functions customized without any hardware changes. The M2 drive is ideal for applications with two DC motors that are working together, two motors that run independently but are physically close or simply when panel space is very limited.- Part Number
- M2
- Consigue plazos de pago de hasta 90 días de 500+ proveedores.
- Descuentos de reventa de hasta el 40%!
Enviar solicitud de precio
1
Formas de pago:
Features
- Stopping Modes
- Inhibit (N.O.) for coasting to a stop. Can be used for frequent starting and stopping
- 1.37 Form Factor
- 1% Base Speed Regulation
- Current Limit (A & B)
- IR Compensation (A & B)
- Torque Mode
- Can be used for speed control or torque control for tension applications
- Two Motor Outputs
- Two separate motor outputs
- Microprocessor Based
- Allows custom programming for OEMs
- Minimum Speed (A & B)
- Accel / Decel (A & B)
- 601 Speed Range
- Maximum Speed (A & B)
- MM Footprint
- Traditional MM mounting pattern and footprint
- Two Operating Modes
- The motors can be run independently or in a ratio mode
Specifications
- Technology Type
- SCR
- Input Voltage
- 115 VAC
- Output Voltage
- 0 - 90 VDC
- Continuous Current
- 11.5 Amps
- Enclosure
- Chassis
- Braking Type
- None
- Reversing Type
- None
- Isolation
- None
Documentos
Data Sheet
DescargarProductos relacionados
Otras categorías
ActuadoresBloquesCables, tuberías y manguerasCompresoresControlAcoplamientos y AccesoriosCilindros y PistonesElectrónicaFiltrosHVACPCs industriales y HMIsIluminaciónTécnica linealMotoresFuente de alimentaciónTransmisión de energíaBombas y VálvulasEnergías renovablesRobóticaSellos, anillos y conectoresSensores y dispositivos de mediciónHerramientas y AccesoriosCNCOtros