ATSU01N232LT

Additional Information

Part Number

ATSU01N232LT

UNSPSC

39121521

Tariff Code

8504404000

Country of Origin

DE

Environment

Product Certifications

UL || CCC || CSA || C-tick

Standards

EN/IEC 60947-4-2

Electromagnetic Compatibility

conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity EN 50082-1 || EMC immunity level B EN 50082-2 || harmonics level 3 IEC 1000-3-2 || harmonics level 3 IEC 1000-3-4 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 || voltage/current impulse level 3 IEC 61000-4-5 || conducted and radiated emissions level 3 IEC 61000-4-6 || immunity to conducted interference caused by radio-electrical fields level 4 IEC 61000-4-11

Ambient Air Temperature For Operation

-10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)

Shock Resistance

15 gn 11 ms EN/IEC 60068-2-27

Vibration Resistance

1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6

Pollution Degree

2 EN/IEC 60947-4-2

Ambient Air Temperature For Storage

-25-70 °C EN/IEC 60947-4-2

Relative Humidity

5-95 % without condensation or dripping water EN/IEC 60068-2-3

Ip Degree Of Protection

IP20

Operating Altitude

<= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m

Contractual warranty

Warranty

18 months

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Toxic Heavy Metal Free

Yes

Reach Regulation

Free of Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Reach Free Of Svhc

Yes

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Electrical Connection

4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit || screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit || 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit || screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit || 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit || screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit

Network Frequency

47.5...63 Hz

[Uc] Control Circuit Voltage

24 V DC +/- 10 %

Height

314 mm

Deceleration Time Symb

adjustable from 1 to 10 s

Discrete Input Voltage

24...40 V

Maximum Switching Current

relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive || relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive

Discrete Output Voltage

24 V 6...30 V) open collector logic

Marking

CE

Power Range

7-11 kW 200-240 V 3 phase || 15-25 kW 380-440 V 3 phase

Net Weight

0.49 kg

Discrete Output Current

2 A DC-13 || 3 A AC-15

Maximum Switching Voltage

440 V relay outputs

Input Output Isolation

galvanic between power and control

Motor Starter Type

soft starter

Function Available

integrated bypass

Supply Voltage Limits

180-528 V

Starting Time

adjustable from 1 to 10 s || 1 s / 50 || 10 s / 5 || 5 s / 10

Minimum Switching Current

10 mA 6 V DC relay outputs

Discrete Input Type

logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm

Assembly Style

with heat sink

Output Voltage

<= power supply voltage

Operating Position

vertical +/- 10 degree

Display Type

1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached

Width

45 mm

Depth

170 mm

Discrete Input Logic

positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA

Starting Torque

30...80 % of starting torque of motor connected directly on the line supply

Tightening Torque

1.9-2.5 N.m || 0.5-0.5 N.m

Supply Frequency

50...60 Hz - 5...5 %

Discrete Output Type

open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO

Specifications

Current Consumption

100 mA

Product Destination

asynchronous motors

Range Of Product

Altistart U01 and TeSys U

Product Or Component Type

soft starter

Motor Power Kw

15 kW, 3 phase 400 V || 7.5 kW, 3 phase 230 V

Phase

3 phase

Power Dissipation In W

2.5 W at full load and at end of starting || 322.5 W in transient state

Utilisation Category

AC-53B EN/IEC 60947-4-2

Icl Starter Rating

32 A

Type Of Start

start with voltage ramp

[Us] Rated Supply Voltage

200...480 V - 10...10 %

Product Specific Application

simple machine

Maximum Horse Power Rating

10 hp, 3 phase 230 V || 20 hp, 3 phase 460 V

Device Short Name

ATSU01

Documentos