280-994

1 / 3

Part Number: 280-994
Tariff Code: 85369010000
UPC: 4044918311496

Group Code : EG000012

Group Description : Terminal blocks

Class Description : Feed-through terminal block

Class Code : EC000897

Version : 7

$3.60

Métodos de pago:

Mejor oferta de:: Proveedor de confianza de Automa.Net
Disponibilidad:: 70 piezas
En stock
Actualizado en: 19-11-2024
Garantía:: 12 meses
Entrega Estimada:: Bajo pedido
Condición:: Nuevos excedentes

Nuevos excedentes - Un artículo nuevo, sin usar, sin daños y sin garantía del fabricante. El artículo puede venir sin embalaje original o en embalaje de reemplazo. Si se proporciona, es posible que la caja haya sido abierta.

Proceso de Pago Seguro

Políticas de Devolución y Reembolso

Políticas de Envío

Políticas de Garantía

Ratings Per Iec/En

Ratings per: IEC/EN 60947-7-1

Environmental Requirements

Processing temperature: -35 … +85 °C
Continuous operating temperature: -60 … +105 °C

Physical Data

Width: 5 mm / 0.197 inches
Height: 75 mm / 2.953 inches
Depth from upper-edge of DIN-rail: 28 mm / 1.102 inches

Material Data

Note (material data): <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
Color: Light gray
Material group: I
Insulation material: Polyamide (PA66)
Flammability class per UL94: V0
Fire load: 0.146 MJ
Weight: 9.098 g

Mechanical Data

Mounting type: DIN-35 rail
Marking level: Center marking

Specifications

Product Group Code: 0001

Commercial Data

Packaging type: Box
Country of origin: DE
GTIN: 4044918311496
Customs tariff number: 85369010000

Ex Information

Reference hazardous areas: See application instructions in section “Knowledge and Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
Ratings per: ATEX: PTB 99 ATEX 3109 U / IECEx: PTB 03.0004U (Ex eb IIC Gb or Ex eb I Mb)
Rated voltage EN (Ex e II): 550 V
Note (rated voltage): Using staggered jumpers reduces the maximum rated voltage to 275 V.
Rated current (Ex e II): 20 A

Ratings Per Csa

Approvals per: CSA 22.2 No 158
Rated voltage CSA (Use Group C): 600 V
Rated current CSA (Use Group C): 24 A

Power Loss

Power loss, per pole (potential): 0.532 W
Rated current IN for specified power loss: 20 A
Resistance value for specified, current-dependent power loss: 0.00133 Ω

Connection 1

Connection technology: CAGE CLAMP®
Actuation type: Operating tool
Connectable conductor materials: Copper || Aluminum
Connectable conductor materials (note): Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
Note (conductor cross-section): 12 AWG: THHN, THWN
Strip length: 8 … 9 mm / 0.31 … 0.35 inches
Wiring direction: Front-entry wiring