Wago
857-409
JUMPFLEX® signal conditioner; bipolar isolation amplifier; configurable
- Consigue plazos de pago de hasta 90 días de 500+ proveedores.
- Descuentos de reventa de hasta el 40%!
€219.15
1
Formas de pago:
Un total de 33 Parts In-Stock de 16 Distributors
Condiciones del producto:
Oferta con plazo de entrega del fabricante
Entrega:Bajo pedido
El mejor precio:
€160.15
Additional Information
- Part Number
- 857-409
- UPC
- 4045454828493
- Tariff Code
- 85437090300
- ETIM
- Group Code : EG000026
- Group Description : Sensors
- Class Description : Isolation amplifier
- Class Code : EC002653
- Version : 7
Output (Analog)
- Output signal type
- Current || Voltage
- Output signal (voltage)
- ± 5 V; 0 … 5 V; 1 … 5 V; ± 10 V; 0 … 10 V; 2 … 10 V
- Output signal (current)
- ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
- Load impedance (voltage output)
- ≥ 2 kΩ
- Load impedance (current output)
- ≤ 600 Ω
- Residual ripple
- ≤ 10 mV (rms)
Signal Processing
- Limit frequency
- 100 Hz / 5 kHz (configurable via DIP switch)
- Step response (typ.)
- 3.5 ms (100 Hz); 68 µs (5 kHz)
Configuration
- Configuration options
- DIP switch || Potentiometer
Environmental Requirements
- Ambient temperature (operation)
- -25 … +70 °C
- Ambient temperature (storage)
- -40 … +85 °C
- Processing temperature
- -25 … +50 °C
- Temperature range of connection cable
- ≥ (Tambient + 10 K)
- Relative humidity
- 5 … 95 % (no condensation permissible)
- Operating altitude (max.)
- 2000 m
Connection Data
- Connection technology
- Push-in CAGE CLAMP®
- Solid conductor
- 0.08 … 2.5 mm² / 28 … 14 AWG
- Fine-stranded conductor
- 0.34 … 2.5 mm² / 22 … 14 AWG
- Strip length
- 9 … 10 mm / 0.35 … 0.39 inches
- Cable type
- Shielded cable
Signaling And Communication
- Configuration options
- DIP switch || Potentiometer
- Input signal (voltage)
- ±5 V; 0 … 5 V; 1 … 5 V; ±10 V; 0 … 10 V; 2 … 10 V
Supply
- Power supply type
- 24 VDC (SELV)
- Nominal supply voltage US
- DC 24 V
- Supply voltage range
- ±30 %
- Current consumption (default)
- ≤ 20 mA
- Current consumption (max.)
- ≤ 40 mA
Physical Data
- Width
- 6 mm / 0.236 inches
- Height
- 94 mm / 3.701 inches
- Depth from upper-edge of DIN-rail
- 97.8 mm / 3.85 inches
Measurement Error
- Transmission error (typ.)
- ≤ 0.1 % of upper-range value
- Transmission error (max.)
- ≤ 0.2 % of upper-range value
- Transmission error (under interference)
- ≤ 15 %
- Temperature coefficient
- ≤ 0.01 %/K
Material Data
- Fire load
- 0.598 MJ
- Weight
- 38.400 g
Input
- Input signal type
- Voltage || Current
- Input signal (voltage)
- ±5 V; 0 … 5 V; 1 … 5 V; ±10 V; 0 … 10 V; 2 … 10 V
- Input signal (current)
- ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
- Input resistance (current input)
- ≤ 50 Ω
- Input resistance (voltage input)
- 1 MΩ
- Input current (max.)
- 50 mA
- Input voltage (max.)
- 32 V
- Zero/span adjustment
- ± 5 % of upper-range value
Standards And Specifications
- Conformity marking
- CE
- EMC immunity to interference
- EN 61000-6-2
- EMC emission of interference
- EN 61000-6-3
- Standards/specifications
- EN 61010-1 || EN 61373 || DNV
Mechanical Data
- Mounting type
- DIN-35 rail
Specifications
- Product Group Code
- 0006
Commercial Data
- Packaging type
- Bag
- Country of origin
- DE
- GTIN
- 4045454828493
- Customs tariff number
- 85437090300
Notes
- Safety information
- Input and output must be safely isolated from any hazardous live parts!
- Note
- Use shielded signal lines! Only use shielded signal lines for analog input and output signals. Only then can you ensure that the accuracy and interference immunity specified for the device can be achieved, even in the presence of interference acting on the signal cable. Use in the living area is only permitted in conjunction with a power supply that meets the criteria of the living area according to EN 61000-6-3.
Test Voltage
- Test voltage (input/output/supply)
- AC 3 kV; 50 Hz; 1 min
Insulation Parameters
- Overvoltage category
- II
- Pollution degree
- 2
- Insulation type (input/analog output/supply)
- Functional insulation
- Insulation type (adjacent devices)
- Reinforced insulation (safe isolation)
Otras categorías
NanómetrosManómetrosFlujómetrosSensoresSensores de aceleraciónSensores de fibra ópticaDetectoresSensores ultrasónicosSensores de temperatura y humedadSensores de vibraciónSensores de nivelSensores de presiónSensores de proximidadSensores InductivosSensores de movimientoGrupo de Sensores MagnéticosSensores ópticosSensores CapacitivosSensores FotoeléctricosSensores de posiciónCodificadoresOtros Sensores y Accesorios