5SH302
LINER,D-TYPE,FOR DIAZED SCREW CAP SIZE DIII/63A, THREAD E33 D-TYPE LINER
LINER,D-TYPE,FOR DIAZED SCREW CAP SIZE DIII/63A, THREAD E33 D-TYPE LINER
- Nuovo sigillato in fabbrica751 pz.
- Nuove eccedenze184 pz.
Filtri
LINER,D-TYPE,FOR DIAZED SCREW CAP SIZE DIII/63A, THREAD E33 D-TYPE LINER
LINER,D-TYPE,FOR DIAZED SCREW CAP SIZE DIII/63A, THREAD E33 D-TYPE LINER
This Harmony XAPA1120 is an empty control station plastic 2 horizontal openings. It is part of the range Harmony XAP, XB2 SL metal enclosures, for Harmony XB4.
This Harmony XAPA1120 is an empty control station plastic 2 horizontal openings. It is part of the range Harmony XAP, XB2 SL metal enclosures, for Harmony XB4.
3-phase loop bridge for 9 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
3-phase loop bridge for 9 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
TeSys K suppressor module, for contactors LC.K, LP.K, CA.K. To be used with 130-250V AC or DC control circuit voltage, it provides a varistor protection limiting the transient voltage to 2 Uc max. Clip-on mounting on front of contactor (no tools required), it incorporates a power-on LED indicator. Sold in lots of 5 units. Green Premium compliant (RoHS/REACh).
TeSys K suppressor module, for contactors LC.K, LP.K, CA.K. To be used with 130-250V AC or DC control circuit voltage, it provides a varistor protection limiting the transient voltage to 2 Uc max. Clip-on mounting on front of contactor (no tools required), it incorporates a power-on LED indicator. Sold in lots of 5 units. Green Premium compliant (RoHS/REACh).
Thalassa PLM wall-mounting polyester enclosure monobloc w/glazed door. 430 x 330 x 200 mm. Built-in canopy, one piece moulded with notches in the rear. Without mounting plate. 2 locks (3 mm double-bar lock). Accessible front. Polyester reinforced with fibreglass, tempered glass door. Grey RAL 7035. IP66, IK08, NEMA (13,4X) 960°C fire resistance.
Thalassa PLM wall-mounting polyester enclosure monobloc w/glazed door. 430 x 330 x 200 mm. Built-in canopy, one piece moulded with notches in the rear. Without mounting plate. 2 locks (3 mm double-bar lock). Accessible front. Polyester reinforced with fibreglass, tempered glass door. Grey RAL 7035. IP66, IK08, NEMA (13,4X) 960°C fire resistance.
This CANopen cable equipped with 2 RJ45 connectors is 1m long. It is part of optimized solution for daisy chain connection of your drive to the CANopen machine bus.
This CANopen cable equipped with 2 RJ45 connectors is 1m long. It is part of optimized solution for daisy chain connection of your drive to the CANopen machine bus.
Conductor marker carrier, transparent, unlabeled, mounting type: slide-on, cable diameter range: 1.5 ... 2.5 mm, lettering field size: 23 x 4 mm
Conductor marker carrier, transparent, unlabeled, mounting type: slide-on, cable diameter range: 1.5 ... 2.5 mm, lettering field size: 23 x 4 mm
Screw bit, hexagon, E6.3-1/4" drive, size: Hex 2 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173
Screw bit, hexagon, E6.3-1/4" drive, size: Hex 2 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173
Magazine, for the THERMOMARK PRIME and the THERMOMARK CARD, for accommodating UCT-WMT..., UCT-EM (7x10)
Magazine, for the THERMOMARK PRIME and the THERMOMARK CARD, for accommodating UCT-WMT..., UCT-EM (7x10)
TeSys F set of power connections, for assembling pairs of 3-pole contactors LC1F265 and CR1F265. To be used in horizontal assembling of identical contactors, for reversing applications. Set of 6 pieces for top and bottom connections. Green Premium compliant (RoHS/REACh).
TeSys F set of power connections, for assembling pairs of 3-pole contactors LC1F265 and CR1F265. To be used in horizontal assembling of identical contactors, for reversing applications. Set of 6 pieces for top and bottom connections. Green Premium compliant (RoHS/REACh).
This product is part of the CANopen range, an offer of connection components. This CANopen preassembled cable is an accessory of programmable logic controllers. The length of this cable is 3m. It is furnished with RJ45 and 9-way D-Sub (DE-09) female connector with integrated line terminator. It weighs 0.128kg. It is suitable for used in general machine control, conveying and packaging applications. This connection sub-base is suitable for use with CANopen bus. Compact and totally expandable, the Modicon M258 Logic Controllers are designated to the machine builders (OEMs) by offering performant solutions in terms of speed control, high speed counting, motion and communication networks.
This product is part of the CANopen range, an offer of connection components. This CANopen preassembled cable is an accessory of programmable logic controllers. The length of this cable is 3m. It is furnished with RJ45 and 9-way D-Sub (DE-09) female connector with integrated line terminator. It weighs 0.128kg. It is suitable for used in general machine control, conveying and packaging applications. This connection sub-base is suitable for use with CANopen bus. Compact and totally expandable, the Modicon M258 Logic Controllers are designated to the machine builders (OEMs) by offering performant solutions in terms of speed control, high speed counting, motion and communication networks.
This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 4A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 10mH. It weighs 1.5kg and its dimensions are, 100mm wide, 135mm high, 60mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.
This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 4A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 10mH. It weighs 1.5kg and its dimensions are, 100mm wide, 135mm high, 60mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.
TeSys D suppressor module, for LC1D09-D38, LC1DT20-DT40 contactors and CAD control relays. To be used with 25-72V AC control circuit voltage, it provides a bidirectional peak limiting diodes protection limiting the transient voltage to 2 Uc max. Clip-on side mounting, overall size of the contactor is unchanged. Green Premium compliant (RoHS/REACh).
TeSys D suppressor module, for LC1D09-D38, LC1DT20-DT40 contactors and CAD control relays. To be used with 25-72V AC control circuit voltage, it provides a bidirectional peak limiting diodes protection limiting the transient voltage to 2 Uc max. Clip-on side mounting, overall size of the contactor is unchanged. Green Premium compliant (RoHS/REACh).
This Harmony RUM plug-in socket has a rated voltage of 250V AC with an output rating of 12A." "This plug-in relay socket is compatible with interface plug-in relay RUM range." "It has a large choice of number of contacts for high rated current use with space-saving design which allows for a flexible and easy installation on DIN rail." "It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere." "It is compatible with plug in control relay." "It enables easy installation and connect to relay from its socket." "Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs)." 0 0 0 0 0 0 0 0 0
This Harmony RUM plug-in socket has a rated voltage of 250V AC with an output rating of 12A." "This plug-in relay socket is compatible with interface plug-in relay RUM range." "It has a large choice of number of contacts for high rated current use with space-saving design which allows for a flexible and easy installation on DIN rail." "It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere." "It is compatible with plug in control relay." "It enables easy installation and connect to relay from its socket." "Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs)." 0 0 0 0 0 0 0 0 0
TeSys F AC coil 240V 40-400Hz (voltage code U7), low sealed consumption, for TeSys F 3-pole and 4-pole contactors LC1 F265, F330. It operates in voltage limits 0.85-1.1 Uc and environments until 55°C. It provides high operating rates to the contactor, until 2400 cycles/hour. Green Premium compliant (RoHS/REACh).
TeSys F AC coil 240V 40-400Hz (voltage code U7), low sealed consumption, for TeSys F 3-pole and 4-pole contactors LC1 F265, F330. It operates in voltage limits 0.85-1.1 Uc and environments until 55°C. It provides high operating rates to the contactor, until 2400 cycles/hour. Green Premium compliant (RoHS/REACh).