Accessori

The complete beacon serves as a vital lighting accessory for tower lights, utilizing a flash discharge tube to produce a strobe light. This feature enables clear status indication for machinery in various applications including automotive, machine tools, material handling, packaging, assembly stations, and conveyors.With an IP65 rating on the fixing base and IP66 on the base unit, this beacon is designed to withstand harsh conditions, making it suitable for environments that are impact, dust, water, and vibration resistant. Its construction includes a base unit made of glass reinforced polyamide and an illuminated unit crafted from polycarbonate, ensuring durability.Operating at a nominal voltage of 120 V AC and a flash energy of 10 joules, it maintains a flashing frequency of 1 Hz with a current consumption of less than 290 mA AC. The beacon measures 70 mm in diameter and has a total height of 232 mm. The device complies with the standards EN/IEC 60947-5-1 and has received several certifications, including CCC, EAC, and UL 508, ensuring reliability and safety in operation.

This Industrial Control Transformer, designated as Type TF, features a power rating of 350VA and operates on a 1 phase system. The transformer is equipped with a primary voltage of 240 x 480V and a secondary voltage of 120V, suitable for frequencies of 50/60Hz. Designed with factory-installed overcurrent protection, it includes two primary and one secondary fuse blocks, providing a compact configuration that meets the overcurrent requirements of panel builders and machinery OEMs. The fuse blocks are pre-wired and mounted on the transformer, maintaining the same footprint as Type T and Type EO units, thereby optimizing space. This transformer complies with UL, CE, and CSA standards, ensuring reliable performance in various applications. It has dimensions of 5.13 in (H), 4.5 in (W), and 5.11 in (D) and features screw clamp terminal connections. The copper winding material enhances its electrical efficiency. Moreover, the product is compatible with FSC2, indicating its suitability for specific applications. The insulation temperature is rated at 130 °C, and the temperature rise is limited to 80 °C.

This plug is designed for nominal voltages up to 500 V and supports a maximum current of 24 A. It incorporates a spring-cage connection method, which simplifies wiring and ensures secure connections. The rated cross section is 2.5 mm², while it accommodates conductor cross sections ranging from 0.08 mm² to 4 mm². The plug is manufactured in blue (RAL 5015) and conforms to the IEC 61984 standard, allowing for connection and disconnection without load or voltage under intended use.The dimensions of the plug include a width of 5.2 mm, height of 20 mm, and depth of 39 mm. It features a degree of pollution rating of 3 and operates within an ambient temperature range of -60 °C to 70 °C. Additionally, the plug meets various fire protection requirements for rail vehicles as specified in DIN EN 45545-2 and has a flammability rating of V0 according to UL 94.The SPB 2,5/ 1-M BU designation code indicates its specific configuration, including the internal cylindrical gauge of A3 and a maximum load current of 24 A when utilizing a 4 mm² conductor cross section. It is suitable for diverse applications, including those requiring reliable performance in harsh environmental conditions.

The PVC Drain Cover is constructed from flexible, chemical-resistant vinyl, offering effective sealing capabilities to prevent spills from contaminating drainage systems. With dimensions of 36 inches in width and length, this drain cover is engineered to meet compliance with various industry regulations, including EPA 40 CFR 112.7(c)(1)(vii) and OSHA standards.This product, identified by the trade name SlikStopper, features a tear-resistant design, ensuring durability in challenging conditions. The bright yellow color enhances visibility, making it suitable for various industrial applications. Additionally, it is compliant with EU RoHS regulations, affirming its safety and environmental considerations.

This terminal block is designed for printed circuit board applications with a pitch of 3.5 mm and accommodates 21 poles arranged at a 180° angle. The solder pin length measures 1.5 mm, making it suitable for various PCB soldering tasks. The component utilizes a PUSH IN wire connection method, with a clamping range capable of handling conductors up to 1.5 mm².Constructed with LCP GF insulating material and featuring a black color, the terminal block adheres to stringent standards including IEC 60664-1 and IEC 61984. The rated voltage is specified at 300 V, and the rated current varies between 10 A and 12 A depending on the application group. Furthermore, it is compliant with several approvals including CSA, cURus, and VDE, ensuring its reliability across diverse industrial applications.With dimensions of 74.2 mm in width, 15.5 mm in height, and 7.8 mm in depth, this terminal block has a net weight of 15.571 g. It supports a wide operating temperature range from -50 °C to 120 °C, enabling its use in various environments. The product is packaged in tubes, facilitating organized handling and storage.

The SIMATIC CFast memory card is a high-performance storage solution designed for Industrial PCs (IPCs) and Open Controllers. With a capacity of 30 GB, this memory card provides ample space for storing data, applications, and operating systems.This card features the latest CFast technology, ensuring fast data transfer speeds and reliable performance in demanding industrial environments. It is compatible with IPCs and Open Controllers that have a corresponding slot, making it an ideal choice for automation and control systems.For more detailed information on compatibility, quantity, and content, please refer to the technical specifications provided by Siemens.

The A50P Amp-Trap® Form 101 high-speed fuses are specifically designed for applications such as DC drives and uninterruptible power supplies, where enhanced protection and reliability are critical. With a maximum operating temperature of 80 °C and a minimum storage temperature of -25 °C, these fuses are built to withstand demanding conditions. Featuring an ampere rating of 600 A and a rated voltage of 500 V AC and 450 V DC, the A50P offers a substantial breaking capacity of 50 kA. The body is constructed from GMG insulating material, while the connection terminals are made of tin-plated copper and utilize a blade type connection. The mounting method is bolted, ensuring secure installation. This fuse is commonly used for replacement in existing systems, providing superior performance with a lower I2t for better protection. The designation code for this product is A50P, and it is part of the Amp-Trap® product line.

The Amp-Trap A4J series fast-acting fuses provide superior current-limiting protection suitable for various applications. With a rated voltage of 600V AC and 300V DC, these fuses are engineered to ensure safety and reliability in electrical systems.The unique design of the A4J fuses prevents the use of substitutes that may have lower voltage ratings or interrupting capabilities, thereby maintaining the integrity of the system. The fuse features a breaking capacity of 200 kA, ensuring robust performance under fault conditions.Constructed with a brass alloy terminal type and GMG insulating material, this fuse is both durable and compliant with ROHS regulations. The dimensions measure 1.62 inches in diameter and 5.75 inches in length, with a weight of 0.8 lb, making it suitable for various installation requirements.

The Amp-Trap A2K-R series fuses are engineered for current-limiting applications, providing reliable protection in scenarios with significant short-circuit currents. These fast-acting fuses are ideal for use in branch and feeder circuits, as well as for back-up protection.With a rated voltage of 250V AC and DC, these fuses exhibit a breaking capacity of up to 200 kA, ensuring effective interruption during fault conditions. The Class RK1 designation indicates suitability for various electrical environments, further enhanced by ROHS compliance.These fuses feature a compact design with a length of 2 inches and a diameter of 0.56 inches, weighing only 0.05 lb, making them suitable for space-constrained installations. The clip mounting style allows for straightforward integration, while the tin-plated copper terminals provide reliable electrical connections.

The A6D-R time-delay fuses are engineered to provide IEC Type 2 'no damage' protection for mains, feeders, and branch circuits that service both motor and non-motor loads. With a rated voltage of 600V AC and DC and an ampere rating of 20A, these fuses ensure rapid operation under extreme fault conditions, delivering maximum short circuit protection to safeguard motor starters, switches, and other circuit components. The time-delay feature accommodates motor in-rush currents, making them suitable replacements for older 600V Class H, K, or RK5 fuses already in use.Each fuse utilizes a SmartSpot® indication system that enhances fault detection capabilities. The fuse body is constructed from PolyTube material, and connections are made with tin-plated copper ferrules. The compact dimensions of the A6D fuse measure 5 inches in length and 0.81 inches in diameter, with a weight of 0.14 lb, facilitating easy installation in various applications.

This equipment marking label, designated as EMSP-AL (50X30), is constructed from aluminum and comes in a natural aluminum color. It is designed to be unlabeled initially, allowing for customization with BLUEMARK ID COLOR, BLUEMARK ID, and BLUEMARK CLED systems. The label features a lettering field measuring 50 mm in width and 30 mm in height, making it suitable for various identification needs.The label supports mounting via screws or rivets, ensuring secure installation. With dimensions of 60 mm in length and a thickness of 0.8 mm, it is designed to withstand operational conditions with an ambient temperature range of -55 °C. The product complies with DIN EN 61010-1 standards, ensuring wipe resistance for durability.Each label weighs approximately 3.936 g, and the packaging unit contains 45 pieces. It has been rigorously tested for resistance to various substances, including isopropanol, ethanol, acetone, and more, confirming its suitability for challenging environments. This product is free from silicone, halogen, and cadmium, aligning with safety and environmental standards.

The LSF-SMT 5.08/08/180 3.5SN BK TU is designed for printed circuit board applications, offering a pitch of 5.08 mm and accommodating 8 poles. The terminal features a solder pin length of 3.5 mm and supports a maximum clamping range of 1.5 mm². This component utilizes a PUSH IN wire connection method and is mounted onto the PCB via THT/THR solder connections, with a conductor outlet direction of 180°.Constructed from LCP GF insulating material, this terminal is available in black. It meets stringent standards with a rated voltage of 300 V and a rated current of 12 A per pole according to UL 1059. The device has been tested in compliance with IEC standards, with a rated impulse voltage of 4 kV under various pollution degrees.Additional features include a volume resistance of 1.60 mΩ and an insulation strength exceeding 108 Ω, ensuring reliable performance in demanding environments. It is suitable for a range of conductors, with a minimum clamping range of 0.13 mm² and a maximum of 1.5 mm². The terminal is packaged in a tube for convenience.For compliance, the product adheres to multiple approvals, including CSA, cURus, and VDE standards, ensuring quality and safety in its applications.

Spacial S3D wall mounted steel enclosure with plain door. 500 x 500 x 250 mm. Single piece body, without mounting plate. Robust construction based on a new design. 3-point closure system with handle and 3 mm double bar lock insert. Steel made, epoxy-polyester powder finish. Gutter shaped front rail double sheet thickness. Protection IP 66, IK10, Grey RAL 7035. 1 cable gland plate included, standard. Extensive range of accessories. Packaging is reusable after assembly.

The UCT-WMCO 3,5 (12X4) YE conductor marking sheet is designed for effective wire identification. This product features a yellow base and allows for labeling with various technologies including TOPMARK NEO, TOPMARK LASER, and THERMOMARK CARD, among others. It supports a cable diameter range of 2.9 mm to 3.5 mm and provides a lettering field of 12 x 4 mm.In terms of durability, it complies with DIN EN 61010-1 for wipe resistance and possesses a flammability rating of V0 according to UL 94. The product is suitable for operation in ambient temperatures from -40 °C to 120 °C, with recommended storage conditions at 23 °C with 50% relative humidity. Proper storage in a dry, dark environment within its original packaging is advised.Each package contains 32 individual labels, organized in rows of 8, weighing approximately 13.11 g each. The base element is made of PC and is free from silicone, halogen, and cadmium, ensuring compliance with the EN 45545-2 fire protection standards for rail vehicles. Additionally, the product has passed various tests for paint wetting impairment substances as per LABS-conformity.

This socket is equipped with a pin connector pattern type L and utilizes a push-in spring connection, making it suitable for various applications in Italy and other countries. It includes an extended touch-proof feature along with a shutter, enhancing safety during operation. The device is designed for mounting on a DIN rail in service interfaces or for direct installation. Operating effectively within a temperature range of -20 °C to 60 °C, this socket is compliant with the CEI 23-50 standard, ensuring reliability in diverse environmental conditions. With dimensions of 45 mm in width, 75 mm in height, and 57.5 mm in depth, it accommodates conductor cross sections from a minimum of 0.2 mm² to a maximum of 4 mm² for solid conductors, and from 0.2 mm² to 2.5 mm² for flexible conductors. The connection method supports conductor sizes ranging from AWG 24 to AWG 12. Environmental compliance is ensured as the product meets China RoHS regulations, indicating no hazardous substances above threshold values and an unlimited environmentally friendly use period. The flammability rating according to UL 94 is V0, signifying its suitability for various applications.

The contact block, part of the Harmony XB6 range, is specifically designed for head applications and includes a 1 NC faston connector. Its construction utilizes silver alloy for optimal conductivity and durability. This product adheres to a wide range of international standards including UL 508 and EN/IEC 60947-5-1, ensuring reliable performance in various environments.Operating effectively within a temperature range of -25 °C to 70 °C, this block is suited for diverse industrial applications. It also features a shock resistance of 30 gn for 18 ms and 50 gn for 11 ms, complying with IEC 60068-2-27 standards, which enhances its durability against mechanical stress.With a mechanical durability of up to 5 million cycles and an electrical durability of 1 million cycles at AC-15 230 V, this contact block is engineered for longevity. The contact operation is categorized as slow-break, with an operating travel of 1 mm, ensuring precise electrical state changes. For safety, a 6 A cartridge fuse provides short-circuit protection.In terms of environmental compliance, this product is mercury-free, free of toxic heavy metals, and meets the requirements of the EU RoHS directive. It is classified as a green premium product, reflecting its commitment to sustainability. The product also includes a positive opening mechanism in accordance with IEC 60947-5-1, enhancing operational safety.

The Plug-in Card Block SKBD 16/MT is designed for 19" applications, featuring a total of 16 positions. It is characterized by a green color and is constructed with a tin contact surface, ensuring reliable connectivity. The pitch of this block is set at 5 mm, accommodating various plug-in card configurations. Packaged in cardboard, this product is manufactured in Poland, aligning with the SKBD product range.

This product is categorized under the XUSL range of safety light curtains, specifically designed for body protection. It features four beams with a spacing of 300 mm and a height protection capability of 910 mm. The device supports two safety outputs, OSSD (0.4A) solid-state PNP, with an operational sensing distance that can be configured from 0 to 10 m or 3 to 20 m depending on wiring. The emission technology utilized is an infrared LED with a wavelength of 950 nm and an effective aperture angle of 25° at a distance of 3 m. The curtain is rated IP65 and IP67, ensuring it is suitable for various environmental conditions. It operates under a supply voltage of 24V DC with a maximum operational current of 2A. The device is equipped with a 5-pin M12 male connector for the transmitter and an 8-pin M12 male connector for the receiver. Constructed with a red aluminum casing, polycarbonate front panel, and polypropylene end caps, its dimensions measure 29.4 mm in width, 31 mm in depth, and 1053 mm in height, with a net weight of 1.7 kg. This safety light curtain is essential for ensuring operator safety around hazardous machinery by providing an optical protection system that halts any moving parts when a beam is interrupted. It is critical to install the transmitter and receiver with their optical surfaces facing each other and aligned correctly for optimal functionality. The system is certified under TÜV, cULus, and CE standards, indicating compliance with safety regulations.

The PTRE 6-2/9 test terminal strip is designed for a nominal voltage of 400 V and utilizes a push-in connection method. It has a rated cross section of 6 mm², accommodating conductor cross sections ranging from 0.5 mm² to 10 mm². The strip is intended for mounting on NS 35/7.5 rails and is presented in a gray color (RAL 7042).This terminal strip supports a maximum load current of 30 A when using a 6 mm² conductor cross section. It features one level with a total of 18 connections, enabling versatile applications. The overall dimensions are 106 mm in width, 99.7 mm in height, and 56.5 mm in depth, with a specific depth of 61.8 mm when mounted on NS 35/7.5.With an overvoltage category of III and a rated surge voltage of 4 kV, the terminal strip is built to meet IEC 60947-7-1 standards. Additionally, it has a flammability rating of V0 according to UL 94, ensuring compliance with stringent safety standards.Designed for a wide ambient temperature range of -5 °C to 70 °C during operation and storage, it also accommodates short-term exposure from -60 °C to +70 °C. The product is manufactured in Poland and weighs approximately 310.1 g including packaging.

The upper housing part for the DIN rail housing, designated as EH 22,5-C SS/ABS BK9005, is constructed to accommodate various electrical components. It is designed with a single connection opening and has specific dimensions, measuring 22.6 mm in width, 75.26 mm in height, and 36.95 mm in depth. The unit is finished in black (RAL 9005), ensuring it meets aesthetic and functional requirements.Manufactured in India, this housing part is made from ABS material, featuring a flammability rating of HB according to UL 94 standards. It supports a maximum of five positions with a pitch of 3.5 mm, making it suitable for compact setups. The assembly process follows guidelines noted in the application area, and the product is packaged in units of ten.The operational ambient temperature range extends from -40 °C to 80 °C, accommodating various environmental conditions. For storage and transport, it withstands temperatures from -40 °C to 55 °C. Additionally, the component is designed for snap-in mounting and does not include ventilation openings. Its construction adheres to IEC 60529 specifications, achieving a maximum IP code of IP20.