Accessori generali

This EMC input filter is an option for variable speed drives of Altivar 12 range. This EMC filter enables your drive to be in compliance with electromagnetic compatibility requirements. Its dimensions are 75mm wide, 194mm high, and 30mm deep. It provides extra protection against electromagnetic emissions. The choice of the filter depends on the drive rating. It weighs 1.120kg. It is designed to reduce conducted emissions on the supply mains and enlarge the maximum motor cable length. This product is compliant with IEC/EN 61800-3, category C1, C2 or C3, in Environment 1 (public network). Choosing the proper EMC filter on the drive rating. The product is delivered in one package. The drive is fixed onto the filter with 2 screws. The ATV12 range meets basic machine requirements united with simplicity.

This Schneider Electric Altivar CANopen open style communication module has 1 x 5-way screw connector. It complies with CANopen open style communication protocol. This communication module enables integration of your drive in your CANopen open style process control network. It is simple to install and remove from Altivar drives thanks to its modular withdrawable design. It is compatible with Altivar Machine ATV320, Altivar 32, Altivar Machine ATV340, Altivar Process ATV600 (ATV630, ATV650)Altivar Process ATV900 (ATV930, ATV950) and Lexium 32. Removable module allows last minute decisions on drive communication protocol, facilitates installation project management. This range is compatible with Altivar Process ATV900, Altivar Process ATV600, Lexium 32, Altivar Process Modular, Altivar Machine ATV340 except Sercos drives, Altivar 32 and Altivar Machine ATV320 and Lexium 32 servo drives. Altivar variable speed drives and soft starters deliver top performance in motor control applications across machines, processes and buildings.

This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with RS 422 differential outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.

This Ethernet/IP, ModbusTCP communication module enables integration of your drive in your process control network. It is simple to install and remove from Altivar drives thanks to its modular withdrawable design. It is compatible with Altivar Process ATV600 and Altivar process Modular. It has 2 x RJ45 connector.

This EMC input filter functions as an additional component for variable speed drives in the Altivar series and servo drives within the Lexium series. With a rated current of 47 A, it is engineered to reduce conducted emissions on the line supply, ensuring compliance with the stringent requirements of IEC/EN 61800-3 categories C1 and C2. This capability also facilitates an increased maximum motor cable length for category C3 applications.Weighing 3.15 kg, the filter is rated with an IP20 protection index and is specifically designed for use in TN and TT type systems. The installation can be performed beside or beneath the drive, with the power supply connected directly through the filter output cable.In terms of operational parameters, the filter operates effectively within an ambient temperature range of -10 to 50 °C. Its construction allows it to withstand shock resistance up to 15 g for 11 ms and vibration resistance of 1 g from 13 to 150 Hz. Storage temperatures can range from -25 to 70 °C, and it can function at altitudes up to 3280.84 ft (1000 m) without current derating.

This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 15A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2 or C3. Its protection index is IP20. It weighs 1kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. It can be mounted beside or under the drive. The drive's power supply is then connected directly via the filter output cable.

The Altivar Remote Terminal is designed as a dialogue option for variable speed drives, specifically within the Altivar range. This terminal boasts an IP54 protection index, making it suitable for various industrial environments. Its primary function is to facilitate remote access to the Human-Machine Interface of the Altivar drive, allowing users to control, adjust, and configure the drive remotely. It also provides a display for monitoring the drive's status and error codes.This terminal is lightweight, weighing just 250g, and is designed to operate within a temperature range of up to 50°C. To ensure proper installation, a remote-mounting cordset (VW3A1104Rxx) is required, which should be ordered separately.The Altivar Remote Terminal is part of the ATV12 range, offering a balance between basic machine requirements and simplicity in design. This makes it an ideal choice for various industrial applications where remote control and monitoring are essential.

Altivar 71 Variable Frequency Drives are for constant torque applications from 1 to 700 HP. For the latest in high performance drives for heavy duty applications consider using an Altivar Process ATV900 family drive. Its protection index is IP54. This terminal is used to locate the Human-Machine Interface of the Altivar drive remotely on the door of an enclosure. Its maximum operating temperature is 50 °C. It provides a pixel resolution of 240 x 160 pixels. It weighs 180g. It is used to control, adjust and configure the drive, display the current values (motor, input/output values, etc), save and download configurations, 4 configuration files can be saved. A remote-mounting cordset VW3A1104Rxx is also required, to be ordered separately.

This PROFIBUS DP V0 communication card is an option for variable speed drives of Altivar range. It is equipped with a 9-way female SUB-D connector. It is compatible with Altivar 61 and Altivar 71. It enables integration of your variable speed drive in your process control network. It weighs 300g.

This door mounting kit is an accessory for variable speed drives of Altivar range. This door mounting kit is designed for mounting the graphic terminal on enclosure door with IP 65/UL Type 12 degree of protection as standard. It comprises a tightening tool, cover plate to maintain IP 65 if no terminal connected, mounting plate, RJ45 for graphic display terminal, seal, fixing nut, anti-rotation pin, RJ45 for mounting cordset (10m maxi), grounding connector. A remote-mounting cordset VW3A1104Rxx has to be ordered separately.

This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 25A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2 or C3. Its protection index is IP20. It weighs 1.650kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. It can be mounted beside or under the drive. The drive's power supply is then connected directly via the filter output cable.

La presa Siemens per cavo 3RK FLAT, YEL & BLK è una piastra di montaggio robusta e affidabile progettata per i moduli compatti K60. Questa piastra di montaggio è progettata specificamente per il montaggio a parete e supporta due cavi piatti: il cavo AS-Interface (giallo) e il cavo AS-Interface 24V (nero). Garantisce un collegamento sicuro ed efficiente utilizzando il metodo di perforazione dell'isolante, il che lo rende la scelta ideale per le applicazioni di automazione industriale.Con il suo grado di protezione IP67 quando montato a vite con il modulo compatto K60, questa piastra di montaggio è adatta per l'uso in ambienti difficili, fornendo un'eccellente resistenza alla polvere e all'ingresso di acqua. Il prodotto è conforme alla direttiva RAEE (2012/19/UE) e soddisfa le restrizioni sulle sostanze secondo la direttiva RoHS dal 01.07.2006.Progettata per garantire facilità di installazione e durata a lungo termine, la piastra di montaggio Siemens K60 è un accessorio essenziale per i moduli I/O digitali che operano sul campo. Fa parte della famiglia di prodotti accessori vari ed è classificato secondo vari standard internazionali, garantendo compatibilità e affidabilità in diversi ambienti industriali.

Radioline - 2.4 GHz wireless transceiver with RS-232/RS-485 interface, can be extended with I/O modules, RSMA (female) antenna connection, point-to-point, star, and mesh networks up to 250 stations, range of up to 5 km (with a clear line of sight), for worldwide use

This rear panel is compatible with Harmony STU human machine interfaces (HMIs). It is made of PC/PBT and available in dark gray. Its dimensions are 118mm (width) x 40.1mm (depth). It is suitable for simple machines and infrastructure applications. This panel is compatible with HMISTU655, HMISTU655W, HMISTU855 and HMISTU855W. Harmony STO (fromerly known as Magelis STO) is powered by the EcoStruxure operator terminal expert and STU (fromerly known as Magelis STU) is powered by Vijeo Designer.

The SMC VVQ2000-10A-1 Blanking Plate Assembly is designed for use with VQ valves, which are renowned for their high-speed performance, frequent operation, stable response times, and long service life. This blanking plate is specifically engineered to facilitate the seamless integration and maintenance of VQ(C)2000 series valves.One of the standout features of this assembly is its innovative mounting method, which allows valves to be replaced without the need to disassemble the entire manifold. This significantly reduces downtime and maintenance labor, making it an efficient choice for industrial applications.Additionally, the built-in one-touch fittings streamline the piping process, saving both time and labor. The assembly is constructed with high-quality metal seals, ensuring durability and reliable performance in various environmental conditions.Applications: The SMC VVQ2000-10A-1 Blanking Plate Assembly is ideal for use in automated systems where high-speed and frequent valve operations are required. It is suitable for industries such as manufacturing, automotive, and process control.

The IE M12 PLUG PRO is designed for reliable connectivity, offering a robust M12 plug connector with a rugged metal enclosure. Its insulation-displacement technology facilitates quick assembly, enabling efficient installation processes. The connector features a 180° cable outlet (D-coded), allowing for flexible wiring configurations. This product is suitable for use with SCALANCE X208 PRO and ET 200 PRO PN systems. It operates effectively in challenging environments, with an ambient temperature range of -40 °C and a high degree of protection rated at IP67 when mounted, ensuring durability against dust and water ingress. Each package consists of 8 units, making it convenient for bulk installations. The swivel locking mechanism further enhances the reliability of connections.

This extended rotary handle is a control accessory for Compact NSXm and PowerPact B devices. The circuit breaker installed in a switchboard with this extended rotary handle is IP54 according to IEC 60529 standard. It can be mounted on the device with an extension shaft up to 600 mm and it maintains suitability for isolation. The shaft length is adjustable. This accessory has a black handle on a black front. Padlocks can be used to lock the handle and disable door opening.

The IWLAN Access Point W7861 RJ45 is designed for outdoor use outside of the USA, featuring a single radio and three R-SMA antenna ports. It supports IEEE 802.11 standards, specifically 802.11a/b/g/h/n, enabling operation over both 2.4 GHz and 5 GHz frequencies. The device achieves a maximum data transmission rate of 450 Mbps per radio, ensuring robust wireless connectivity. The access point includes one RJ45 port with a maximum data rate of 1 Gbps, compatible with Power over Ethernet (PoE) and operates on a redundant 24 V DC supply.This access point is built to withstand harsh environments, with an IP65 protection rating allowing operation in temperatures ranging from -40°C to +60°C. It features a DSSS and OFDM technology for enhanced signal quality and supports WPA2/802.11i/e for secure wireless communications. The device also includes features such as bridge and repeater functions, making it versatile for various networking applications.Included in the delivery are manuals in German and English, available on a CD-ROM, along with a terminal block. Note that national approvals should be observed for its operation.

Series AN silencers offer various styles and low back pressure in a compact, easy mounting design. The noise reduction has been improved to 30 dB(A) and the case is UL94-V0 grade, flame resistant material. Series AN is available with M, R or NPT threads.

This actuator head is specifically designed for use with position switches 3SE51/52 that utilize snap-action contacts. With a total length of 142.5 mm, it features a plunger measuring 50 mm. The construction material is plastic, ensuring adequate functionality within specified limits.The actuator head operates effectively within a temperature range of -25 °C to 85 °C, making it suitable for a variety of industrial applications. It is mounted using a lockable plug-in fixing method, ensuring secure installation and reliability in operation. This component is essential for applications requiring precise positional feedback in automation and control systems.