Azionamenti e motori

The SIRIUS soft starter is an advanced solution designed to meet the needs of demanding industrial applications. With a capacity of up to 400 V and 40 °C standard, it offers a robust performance with a maximum current rating of 693 A and power handling capability of 400 kW. The soft starter is equipped with screw terminals for easy installation and maintenance.For applications requiring higher power demands, the SIRIUS soft starter also offers an Inside-delta configuration. This configuration provides a maximum current rating of 1200 A and power handling capability of 710 kW, making it suitable for 200-460 V AC and 230 V AC applications.The SIRIUS soft starter is a phased-out product. The preferred successor type is the SIRIUS 3RW5. For more information on the successor, please refer to the model >>3RW5553-6HA14

The softstarter PSE105-600-70 is designed for a rated maximum operational current of 105 A, with an operating voltage range spanning from 208 to 600 V AC. It features a two-phase control system that allows for a soft start and stop through a voltage or torque ramp. The device includes built-in bypass for easy installation and energy savings. It also provides a relay output with RUN, TOR, and Event signals in the NO state. The PSE105-600-70 offers functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. The device is equipped with an illuminated display that uses symbols for language neutrality. As an option, you can add an identical external keypad rated at IP66. Communication with the PSE105-600-70 can be achieved through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can use an external adaptor and a Fieldbus plug. The softstarter is a versatile solution suitable for small to medium-sized three-phase motors with nominal currents from 18 to 370 A. Common applications include pumps, fans, compressors, and conveyors.

SINAMICS G120C POTENZA NOMINALE 0,55KW CON 150% DI SOVRACCARICO PER 3 SEC 3AC380-480V +10/-20% 47-63HZ FILTRO INTEGRATO CLASSE A INTERFACCIA I/O: 6DI, 2DO,1AI,1AO SAFE TORQUE OFF BUS DI CAMPO INTEGRATO: PROFIBUS-DP PROTEZIONE: IP20/ UL TIPO APERTO DIMENSIONI: FSA 196X73X203(HXWXD) ESTERNO 24V

Square D 2510K motor starting switches provide compact manual On Off control of single or three phase motors or resistance heating loads up to 600 VAC, where overload protection is not required or provided separately. Open type fits industry standard single-gang switch boxes for direct mounting in a wall or machine using any standard cover plate with a standard single cutout. Pilot light option is available. A variety of enclosures are available. Units are UL Listed and CSA Certified for global applications. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This NEMA 1 general purpose enclosure is a surface mounting enclosure. The enclosure has has a 0.5 and 0.75 knockout on the top and bottom. The enclosure is 4.25 inches tall, 2.44 inches wide and 2.75 inches deep. It weighs 0.84 lb. This device is UL Listed and CSA certified.

The softstarter PSR85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The Sinamics S120 Double Motor Module is designed for high performance applications requiring double input DC 600V motor modules with an output of 3-PH 400V, 9A/9A. It features a compact booksize internal air cooling system optimized for pulse sample and support of the extended safety integrated functions including DRIVE-CLIQ Cable.This module is designed to provide reliable performance in demanding industrial environments. Its robust design and advanced features make it an ideal choice for applications where high precision, fast response times, and low power consumption are required.

The ABB PSR37-600-70 is a compact, reliable solution for managing the start and stop of small three-phase motors. With a rated maximum operational current of 37 A, it can handle a wide range of voltages from 208 V to 600 V AC.This softstarter features a two-phase control soft start and stop through a voltage ramp, ensuring smooth transitions and energy efficiency. It also includes a built-in bypass for easy installation and a relay output for RUN and TOR signals in the NO state. The start/stop ramp and time can be easily set using three potentiometers on the front.The ABB PSR37-600-70 is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available for this purpose. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.This softstarter range is suitable for small three-phase motors with nominal currents from 3 to 105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

Il softstarter PSR105-600-70 ha una corrente d'esercizio massima nominale di 105 A con un intervallo di tensione d'esercizio da 208 a 600 V c.a. La tensione di controllo nominale è compresa tra 100 e 240 V CA a 50/60 Hz. PSR è dotato di un controllo bifase di avvio e arresto graduale tramite una rampa di tensione. Ha un bypass incorporato per una facile installazione e risparmio energetico. Un segnale RUN e un segnale TOR sono disponibili da un'uscita relè in NO (stato normalmente aperto). La rampa di avvio/arresto e il tempo sono facili da impostare grazie a tre potenziometri sulla parte anteriore. Il PSR viene spesso utilizzato in combinazione con un avviatore motore manuale (MMS) di ABB, quindi sono disponibili kit di collegamento meccanico. Un'altra opzione popolare è la comunicazione Fieldbus, che può essere abilitata da un adattatore esterno e da una spina Fieldbus. La gamma PSR è il nostro softstarter più compatto con funzionalità e valori di base. Sono adatti per piccoli motori trifase con correnti nominali da 3 a 105 A e possono gestire fino a 100 avviamenti all'ora. Le applicazioni più comuni sono, ad esempio, pompe, ventilatori, compressori e nastri trasportatori.

Key Features The MS325-25 manual motor starter by ABB is a 54 mm width device with a rated operational current of Ie = 25 A. This manual motor starter is designed to switch on and off motors and protect them from short-circuits, overload, and phase failures without the need for a fuse. It offers a rated service short-circuit breaking capacity of Ics = 50 kA at 400 VAC and trip class 10A. Additional Features The manual motor starter comes with built-in disconnect function, temperature compensation, trip-free mechanism, and a rotary handle with clear switch position indication. It is suitable for three- and single-phase applications. Accessories include auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks, and locking devices for protection against unauthorized changes.

Convertitore di frequenza SINAMICS G110D, con interruttore di riparazione, filtro integrato classe A, modulo di frenata integrato, interfaccia bus AS-Interface, 3AC380-500V +10/-10% 47-63Hz, sovraccarico massimo: 7,5kW a 200% 3s, 150% 60s, 100% 300s, temperatura ambiente -10 a +40°C, 210 x 450 x 240 (HxLxP), protezione FSC IP65, senza pannello operatore

The PSE25-600-70 softstarter is engineered to handle a wide range of applications, offering a rated maximum operational current of 25 A and an operating voltage span from 208 V AC up to 600 V AC. This device features a two-phase control with a soft start and stop through a voltage or torque ramp, ensuring smooth operation and energy efficiency. The PSE25-600-70 is equipped with built-in bypass for easy installation and offers various protection functions such as current limit, kickstart, analog output, end of life (EOL), underload, and locked rotor protection. It also provides a RUN, TOR, and Event signal from a relay output in NO state. To enhance user interaction, the PSE25-600-70 incorporates an illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66 for added convenience. Communication options with the PSE25-600-70 include hardwire inputs Start/Stop or Reset of fault, built-in fieldbus communication Modbus RTU, and an external adaptor and Fieldbus plug. This softstarter is a true general-purpose solution, offering a perfect balance between high starting capacity and cost efficiency.

SINAMICS G120 MODULO DI POTENZA PM230 CON FILTRO INTEGRATO CLASSE A PROTEZIONE IP20 3AC380-480V +10/-10% 47-63HZ USCITA BASSO SOVRACCARICO: 22KW PER 110% 60S,100% 240S TEMPERATURA AMBIENTE 0 A +40 GRADI C(LO) 419 X 275 X 204 (HXWXP), FSD SENZA UNITÀ DI CONTROLLO E PANNELLO APPROVATO PER CU240B/E-2 E CU230P-2 VERSIONE FIRMWARE V4.4 NOTA: PM230 NON SUPPORTA SICUREZZA

Product Overview The HALL SENSOR BOX is a specialized component designed for use in the automation industry. It features a straight cable outlet, providing a clean and efficient design. This product is compatible with series 050 to 200 and is suitable for commuting applications. Technical Specifications The HALL SENSOR BOX comes in two primary unit lengths: 2 and 4. It also includes a straight cable polarization determination feature, enhancing its functionality and versatility.

Il Siemens SINAMICS S210 è un sistema di servoazionamento ad alte prestazioni progettato per fornire un controllo preciso del movimento per un'ampia gamma di applicazioni industriali. Questo versatile sistema di azionamento è ideale per le attività che richiedono elevata dinamica e precisione, come macchine per l'imballaggio, sistemi di movimentazione e macchine utensili.Caratteristiche principali:Servocomando avanzato con frequenza di uscita fino a 550 HzDesign robusto con protezione IP20Supporta la comunicazione PROFINETAmpio intervallo di tensione di ingresso (200-480 V)Sistema di raffreddamento ad aria integratoPerfetto per:Macchine per l'imballaggioSistemi di movimentazione MacchineutensiliSistemi di automazione

Il servoconvertitore Siemens SINAMICS S210 è una soluzione di alto livello per il controllo preciso del motore in varie applicazioni industriali. Progettato per gestire un intervallo di tensione di ingresso di 200-480 V 3AC con una tolleranza da -10% a +10%, questo servoconvertitore garantisce prestazioni affidabili in diverse condizioni. Funziona a una gamma di frequenza di 45-66 Hz e fornisce una tensione di uscita di 0 V in ingresso con una corrente di 7,0 A, supportando motori fino a 2,0 kW.Caratteristiche principali:Tensione di ingresso: 200-480 V 3ACCorrente di uscita: 7,0 APotenza motore: 2,0 kWGamma di frequenza: 0-550 HzGrado di protezione: IP20Dimensioni compatte del telaio: 70 x 322 x 223 mm (LxAxP)Con la sua classe di protezione IP20, il SINAMICS S210 è protetto contro gli oggetti solidi e offre una soluzione robusta per gli ambienti industriali. Le dimensioni compatte del telaio (70 x 322 x 223 mm) garantiscono una facile integrazione nei sistemi esistenti senza richiedere uno spazio significativo.ApplicazioniIdeale per applicazioni che richiedono un controllo preciso del motore, come ad esempio:Sistemi di automazioneMacchine per l'imballaggio Attrezzature per la movimentazione dei materialiMacchine tessiliLa conformità alla più recente direttiva RoHS e ad altri standard ambientali garantisce che il SINAMICS S210 sia una scelta ecologica per le industrie moderne. Il suo stato attivo del ciclo di vita del prodotto (PM300) garantisce supporto e disponibilità continui.

The Omron 3G3MX2-A4007-E is a sophisticated three-phase inverter designed for precise motor control applications. It provides smooth operation down to zero speed and precise cyclic and torque control in open loop, eliminating the need for an encoder. This inverter supports both induction and synchronous motors, making it highly versatile for various industrial applications.Key features include current vector control for high starting torque (200% at 0.5 Hz), dual rating for heavy-duty (120% for 1 minute) and normal-duty (150% for 1 minute) operations, and built-in logic programming capabilities. The inverter also offers positioning functionality and brake control, enhancing its utility in complex automation systems.For communication, the 3G3MX2-A4007-E supports multiple fieldbus options including EtherCAT, Modbus, DeviceNet, Profibus, CompoNet, MECHATROLINK-II, and EtherNet/IP. It is equipped with a USB port for easy PC programming and a 24 VDC backup supply for the control board, ensuring reliable operation even during power interruptions.Compliant with ISO13849-1 safety standards, the inverter includes double input circuits and an external device monitor (EDM) for enhanced safety. The compact design (108mm x 128mm x 171mm) and lightweight (1.6kg) make it easy to integrate into existing systems.

The Omron JX Series Frequency Inverter is a high-performance solution designed for precise motor control in various industrial applications. With a power rating of 0.4 kW, this inverter is suitable for single-phase 230V systems and supports a wide output frequency range of 0.5 to 400Hz. The compact design ensures easy integration into existing setups, while the integrated ModBus communication port facilitates seamless network connectivity.Key Features:Supports a wide output frequency range of 0.5 to 400HzIntegrated ModBus RTU communication for network connectivityBuilt-in CE filter for enhanced electromagnetic compatibilityMulti-level speed settings with up to 16 levelsPID control for precise motor speed regulation100% rated torque from 6HzComprehensive protection features including overcurrent, overvoltage, short circuit, and overheating protectionThis inverter is ideal for applications requiring reliable and efficient motor control, such as conveyors, fans, pumps, and other machinery. Its robust design and advanced features ensure long-term performance and reliability, making it a valuable addition to any industrial automation setup.

The Omron 3G3MX2-A4015-E MX2 Inverter Drive is designed for seamless integration into a wide range of industrial automation systems. This high-performance drive offers precise motor control with sensorless vector technology, making it ideal for applications requiring high torque and dynamic response. With a power rating of 1.5 kW (HD) and 2.2 kW (ND), and a maximum output frequency of 580Hz, it ensures optimal performance and energy efficiency.The MX2 series is known for its robust design and reliability, featuring a three-phase 400 VAC power supply. It supports various motor types and provides advanced functionalities such as torque control, positioning, and safety features. The drive is compliant with international standards, ensuring compatibility and safety in diverse industrial environments.Applications include conveyors, fans, pumps, and other machinery where precise speed and torque control are critical. The compact design and user-friendly interface make installation and operation straightforward, reducing downtime and maintenance costs.

The Siemens SIMOVERT P Transistor Pulse Converter is a high-performance, open-chassis unit designed for efficient power management in industrial settings. With its robust construction and advanced technology, this converter ensures reliable operation and optimal performance.Key Features:Open-chassis design for easy integrationIP20 protection ratingOperates on 1-phase AC 220/240V, 50/60Hz0.7KVA power capacityIdeal for:Industrial automationPower management systemsManufacturing plants

The SEW-Eurodrive MOVITRAC 31C Inverter is designed to provide efficient and precise motor control for a wide range of industrial applications. With its robust construction and advanced features, this inverter ensures reliable performance and energy savings.Key Features:Input voltage: 3 x 380-500 VAC +/-10%Output power: 2.8 kVAContinuous output current: 5.0 AMotor power: 1.5 kWCompact dimensions: 105 x 188 x 189 mmLightweight: 2.5 kgPerfect for:Manufacturing plantsAutomated production linesMaterial handling systems