Azionamenti e motori

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 140A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 125hp (at 575V) / 110kW (at 690V) for standards applications and 100hp (at 575V) / 90kW (at 690V) for severe applications. It weighs 12.4kg and its dimensions are, 200mm wide, 340mm high, 265mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

The PSR16-600-70 Softstarter is designed to provide a smooth start and stop for small three-phase motors. With a rated maximum operational current of 16 A and an operating voltage range of 208...600 V AC, this softstarter ensures reliable performance in various applications.Key Features:Two-phase control soft start and stop through a voltage rampBuilt-in bypass for easy installation and energy savingRUN signal available from a relay output in NO (normally open state)Easy start/stop ramp and time setting with three potentiometers on the frontCompact design suitable for small three-phase motors with nominal currents from 3...105 ACan manage up to 100 starts per hourCommon applications include pumps, fans, compressors, and conveyors. The PSR16-600-70 Softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 3A at 8kHz and a continuous power of 900W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

The Schneider Electric TeSys Ultra additional function module is designed for insertion into advanced power bases LUB120, LUB320, and LUB380. This module enables motor load monitoring by providing a 4-20mA output signal and an image of the load ratio. It requires connection to a load impedance of 100 Ohm typical (500 Ohm max) for optimal performance. The TeSys Ultra Function Module measures phase currents and computes the ratio I average/Ir within the range of 0 to 2 for LUCB and LUCD control units, and of 0 to 3 for LUCC control units. It operates with an external power supply of 24V DC and is to be inserted in the cavity of a power base provided for auxiliary modules. This module is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and is Green Premium compliant (RoHS/REACh).

The SINAMICS V90 PROFINET 1/3 AC 200V 0.75kW servo drive from Siemens is designed to deliver high performance and reliability for a wide range of industrial applications. Featuring PROFINET communication, this drive ensures seamless integration with automation systems, enabling precise and efficient motion control. With an input voltage range of 200-240 V AC and a motor power of 0.75 kW, the SINAMICS V90 is ideal for applications requiring consistent and accurate performance.The drive offers a robust design with IP20 protection, ensuring durability in demanding environments. Its compact size (80x170x195 mm) allows for easy installation in space-constrained settings. The SINAMICS V90 also complies with various industry standards, including RoHS and WEEE, making it a reliable and environmentally friendly choice.Key benefits of the SINAMICS V90 include its high efficiency, easy integration with existing systems, and compliance with international standards. This servo drive is suitable for a variety of applications, including packaging machines, material handling systems, and general automation tasks.

The Schneider Electric Altivar Machine ATV320 is a versatile variable speed drive designed for a wide range of applications. Its compact form factor allows vertical stacking inside machine frames, making it an ideal choice for Original Equipment Manufacturers (OEMs) with simple and advanced application requirements. This drive can feed 3-phase synchronous and asynchronous motors, offering a rated power of up to 4kW and a voltage range from 380V to 500V AC.The Altivar Machine ATV320 is robustly designed with IEC 60721-3-3 class 3C3 coated printed circuit boards, allowing it to operate in harsh environmental conditions. It incorporates functions suitable for common applications, including high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors.The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions can be configured using SoMove software. The Altivar Machine ATV320 conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), and is CE, UL, CSA, NOM, EAC and RCM certified.Mounting accessories and external options such as braking resistors, line chokes, motor chokes, and additional EMC filters are available with Altivar Machine ATV320 drives. The drive is designed to be mounted in a vertical position on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM, allowing for configuration, control, and diagnosis directly in SoMachine and SoMove software by means of the same software brick (DTM). The Altivar Machine ATV320 is eco-friendly and complies with directives such as RoHS, WEEE, etc. relating to environmental protection.

The servo motor BMH is designed to integrate with the Lexium 32 range, providing essential motion control capabilities. It operates at a maximum mechanical speed of 8000 RPM and features a continuous stall torque of 2.5 Nm, making it suitable for various applications requiring precise movement.This unit is equipped with a single-turn SinCos Hiperface encoder, ensuring accurate speed feedback with a resolution of 131072 points per turn. It has an untapped shaft end and lacks a holding brake, which contributes to its lightweight design, weighing only 2.3 kg.Electrical connections are facilitated through rotatable right-angle connectors dedicated to power and encoder cables. The motor operates at a rated supply voltage of 480 V and has a continuous stall current of 2.94 A. Its IP54 rating provides adequate protection against dust and moisture, suitable for industrial environments.The motor flange measures 70 mm and is fixed by four 5.5 mm mounting holes arranged in a circle with a diameter of 82 mm, adhering to an international standard flange for easy installation. This model is compatible with several Lexium 32 drives, specifically LXM32AD12N4, LXM32SD12N4, LXM32MD12N4, and LXM32CD12N4.Designed for operational efficiency, this servo motor is certified by UL, ensuring compliance with industry standards.

Il Siemens SIRIUS Soft Starter S2 è progettato per fornire un controllo motore efficiente e affidabile per applicazioni industriali. Questo soft starter avanzato garantisce un avviamento regolare e una riduzione delle sollecitazioni meccaniche sui motori, prolungandone la durata e riducendo al minimo i costi di manutenzione. Con una corrente nominale di funzionamento di 45 A e il supporto per motori fino a 22 kW a 400 V, è ideale per un'ampia gamma di applicazioni.Il SIRIUS Soft Starter S2 è dotato di un sistema di contatto di bypass integrato e di tiristori per prestazioni affidabili. Offre protezione intrinseca del dispositivo, protezione da sovraccarico del motore e limitazione di corrente regolabile. L'unità supporta tensioni di alimentazione di controllo c.a. e c.c., il che la rende versatile per vari sistemi di controllo.La conformità alla norma IEC 60947-4-2 e ad altri standard pertinenti garantisce un'elevata sicurezza e prestazioni. L'avviatore statico è dotato di morsetti a vite per collegamenti sicuri e supporta sia i metodi di montaggio a vite che a scatto per una facile installazione. Inoltre, include una funzione di reset esterno e un display rosso del segnale di guasto per una rapida risoluzione dei problemi.Applicazioni: Il Siemens SIRIUS Soft Starter S2 è adatto per l'uso in ambienti industriali in cui il controllo e la protezione affidabili del motore sono essenziali. È ideale per applicazioni come pompe, ventilatori, compressori e nastri trasportatori.

Il Siemens ET200S DSS1E-X HF è un soft starter diretto ad alte prestazioni progettato per un controllo affidabile del motore nelle applicazioni di automazione industriale. Con un intervallo di impostazione da 2,4 a 16,0 A, questo dispositivo garantisce un avvio regolare del motore e la protezione tramite commutazione elettronica e protezione elettronica. Supporta le operazioni AC-3/TO 7,5kW/400V ed è espandibile per i moduli di controllo dei freni, il che lo rende versatile per varie esigenze di controllo del motore.L'ET200S DSS1E-X HF è dotato di moduli 2DI e di un segnale ES dell'avviatore motore dall'interruttore automatico, che consente una parametrizzazione e un controllo precisi. È compatibile con DPV 1 e PROFIenergy su PN, garantendo una perfetta integrazione nelle moderne reti industriali e nei sistemi di gestione dell'energia.Questo soft starter è ideale per le applicazioni che richiedono un controllo affidabile del motore, come sistemi di trasporto, pompe e ventilatori. Il suo design robusto e le sue caratteristiche avanzate lo rendono un'aggiunta preziosa a qualsiasi configurazione di automazione industriale.

This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and parallel key shaft end without holding brake. It is an equipped with an absolute multi-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. It is a servo motor with a rated supply voltage of 115V to 480V, a continuous stall current of 1.8A and a continuous power of 690W. The shaft dimensions are 11mm (diameter) x 23mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 and IP65 rated product. The length of this product is 154mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 2.1kg. This range is compatible with PacDrive 3 for motion centric machines. It supports 70mm international standard flange mount with a natural convection cooling system. Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.

The Altivar Process ATV900 variable speed drive is engineered for controlling 3-phase motors in industrial applications. It supports a wide rated supply voltage range of 380 to 480 Vac and is capable of handling continuous output currents of 173 A for normal duty operations and 145 A for heavy duty tasks. Integrated communication protocols such as Modbus TCP and EtherNet/IP facilitate seamless integration into automation systems, while the device supports various option modules for enhanced connectivity. Notably, the ATV950D90N4E variant includes a braking chopper, making it suitable for applications requiring precise control over motor dynamics. Designed for harsh environments, this drive has an IP55 protection rating and operates effectively in ambient conditions ranging from -15°C to 50°C. Its built-in safety features include Safe Torque Off (STO) and Safe Stop 1 (SS1), ensuring high operational reliability. The device's compact dimensions, measuring 345 mm in width, 1250 mm in height, and 436 mm in depth, make it suitable for wall mounting in various industrial settings.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Ethernet/IP and Modbus/TCP protocol is used by this controller. Ethernet TCP/IP communication is used. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 5 to 100 amperes. 24 VDC is used to power this controller. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

The servo motor is part of the Lexium 52 & Motors range tailored for PacDrive 3 applications. This variant features a maximum mechanical speed of 9000 RPM and operates without a holding brake. It is equipped with an absolute multi-turn SinCos Hiperface® encoder that provides a speed feedback resolution of 128 periods.With a rated supply voltage range of 115V to 480V, it delivers a continuous power of 290 W and a continuous stall current of 0.73 A. The shaft measures 9 mm in diameter and 20 mm in length, featuring a smooth end for improved performance. The motor is designed with rotatable right-angled electrical connectors and has an IP54/IP65 protection rating, making it suitable for various environments.The product dimensions include a length of 132.5 mm and centering collar dimensions of 2 mm depth and 40 mm diameter, with a 63 mm mounting hole. Weighing 1.2 kg, this servo motor is compatible with PacDrive 3 for motion-centric machines and supports a 55 mm international standard flange mount with natural convection cooling. The Lexium 52 series serves as an effective counterpart to the Lexium 62 multi-axis servo system, contributing to the versatility of the PacDrive system.

SIRIUS MOTOR STARTER M200D TECHNOLOGY MODULE DIRECT ON-LINE-STARTER MECHANICAL SWITCHING 3 400V AC/5,5KW; 1,5A...12,00A; ELECTR. OVERLOAD PROTECTION; THERMISTOR: THERMOCLICK / PTC WITHOUT BRAKE CONTACT 4DI / 2DO HAN Q4/2 - HAN Q8/0 WITH OPERATOR TERMINAL AND KEY-OPERATED SWITCH USING A COMMUNICATIONS MODULE 3RK1305* USABLE WITH PROFIBUS OR PROFINET

The SINAMICS G120X is designed for a rated power of 315kW, capable of delivering 135% output for 3 seconds or 110% for 60 seconds, and maintaining 100% for up to 240 seconds. This model operates on a 3AC 380-480V input with a frequency range of 47-63Hz and is suited for ambient temperatures from 0 to +45 degrees Celsius. Enclosed in a frame size of FSH, it offers protection rated at IP20 and is classified as an UL open type. Integrated fieldbus connectivity includes PROFINET-PN and Ethernet IP. The converter features six digital inputs, two analog inputs, and one analog output, with a maximum output frequency of 100 Hz.With a nominal output current of 585 A, the device does not support PC connections and operates with a total of 6 HW-interfaces. Notably, it allows for TCP/IP protocols, enhancing its communication capabilities while supporting industrial applications.

The servo motor SH3 100 is a key component of the Lexium 52 & Motors range tailored for PacDrive 3 applications. With a maximum mechanical speed of 6000 RPM, this 4-pole motor features a smooth shaft end equipped with a holding brake. It incorporates an absolute multi-turn SinCos Hiperface® encoder providing a speed feedback resolution of 128 periods.This motor operates within a rated supply voltage range of 115V to 480V and has a continuous stall current of 3.5 A, delivering a continuous power output of 1190 W. The shaft specifications include a diameter of 19 mm and a length of 40 mm, complemented by rotatable right-angled connectors for electrical connections. The device is rated IP54/IP65, ensuring protection in various environments.Measuring 199.5 mm in length and weighing 4.8 kg, the motor features a centering collar with a depth of 3.5 mm and a diameter of 95 mm, with mounting holes sized at 9.0 mm in diameter, arranged in a circle of 115 mm. It is compatible with the PacDrive 3 system, which is suitable for motion-centric machinery.

TeSys U standard control unit to be inserted in power bases LUB32, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 7.5kW@400V. It provides full protection to motors with a rated current Ir 4.5-18A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 110-240V AC / 110-220V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This servo motor, part of the Lexium 32 range, is designed for applications requiring reliable and precise motion control. With a rated supply voltage of 480V and a continuous stall current of 18A, it delivers a continuous power output of 4.8 W, making it appropriate for various industrial settings.The motor achieves a maximum mechanical speed of 4000 RPM, supported by a holding brake that ensures stability during operation. It employs a SinCos Hiperface® encoder with a resolution of 32768 points per turn, facilitating accurate data transmission between the motor and servo drive, which is essential for synchronization in motion tasks.Constructed with a keyed shaft measuring 24mm in diameter and 50mm in length, this unit has an IP54 rating for protection against dust and water ingress. The compact design includes a 4-point axial mounting flange compliant with international standards, allowing for easy installation.With dimensions of 267mm in length and 140mm in width, and a weight of 18.5kg, the motor is equipped with rotatable right-angled connectors for electrical connections. The BMH servo motor is particularly effective in high-load scenarios due to its medium moment of inertia and is compatible with Lexium 32 servo drives.

The PSR SSTR soft starter is engineered for environments with high start frequency demands, making it suitable for various industrial applications. With a rated operational current of 11 A and an operational voltage range of 208–600 V AC, it effectively manages power in compact installations. Notably, this device supports a control supply voltage of 24 V AC/DC, providing flexibility in electrical systems. The soft starter is capable of executing numerous starts per hour with minimal energy loss at full speed due to its integrated bypass feature. The soft starter operates within a temperature range of -25 to +60 °C, making it versatile for different operational environments. Additionally, it supports a ramp time adjustable from 0 to 20 seconds, allowing for customizable starting profiles. Its design complies with the American Recovery and Reinvestment Act and the Buy American Act, ensuring adherence to relevant regulations. The PSR SSTR also features visual LED indicators for operational status, facilitating monitoring during use.

The BMH servo motor is part of the Lexium 32 series, designed for motion servo drives in machines ranging from 0.15kW to 7kW. This motor achieves a maximum speed of 6000 RPM and incorporates a holding brake, addressing the needs of demanding applications. With a medium moment of inertia, it ensures precise control in high-load scenarios.Equipped with a SinCos Hiperface® encoder offering a resolution of 32768 points/turn, this motor facilitates automatic data transmission to the servo drive, enhancing synchronization during operation. The motor's rated supply voltage is 480V, with a continuous stall current of 5.04A and a continuous power output of 2.36W.Dimensions include a shaft diameter of 19mm and a shaft length of 40mm. It also features rotatable right-angled connectors for electrical connections and is rated at IP54 for protection against dust and water ingress. The overall dimensions are 202.3mm length and 100mm width, with a weight of 6.4kg. The motor supports an international standard 100mm flange mount and utilizes natural convection for cooling.The BMH servo motor is optimized for compatibility with Lexium 32 servo drives, providing reliable performance across various applications.