Componenti meccanici

The Metric Tapered Roller Bearing with a 17mm bore diameter and 40mm outside diameter is a fundamental component in numerous industrial applications. This bearing, identified by part number 30203, is part of the TS (Tapered Single) series, known for its reliability and efficiency. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring), making it easy to install and maintain.Designed to be mounted in opposing pairs on a shaft, this bearing ensures optimal load distribution and stability. The stamped steel cage enhances durability and performance under various operating conditions. This bearing is engineered to meet stringent industry standards, ensuring long service life and minimal maintenance.Applications for this bearing include automotive, industrial machinery, and heavy equipment, where precision and reliability are paramount. The tapered design allows for effective handling of both radial and axial loads, making it versatile for different use cases.

L'alloggiamento ritti in due metà SKF SNL 515-612 è progettato per fornire prestazioni e affidabilità ottimali nelle disposizioni dei cuscinetti. Essendo uno degli alloggiamenti dei cuscinetti più popolari sul mercato, è progettato per ridurre al minimo i requisiti di manutenzione e massimizzare la durata dei cuscinetti che alloggia.Caratteristiche principali: Facile installazioneDisposizione dei cuscinetti economicaManutenzione ridottaPerdite di grasso ridotte al minimoApplicazioni: Ideale per varie applicazioni industriali in cui l'affidabilità dell'alloggiamento dei cuscinetti è fondamentale. Perfetto per l'uso in macchinari, nastri trasportatori e altre apparecchiature che richiedono un supporto del cuscinetto robusto e durevole.

The SMC MXH20-15 Compact Slide Table Cylinder is designed for applications requiring high rigidity and precise linear motion. This actuator features a compact design, making it ideal for space-constrained environments. The MXH series incorporates a high rigidity guide, ensuring stable and accurate performance in demanding industrial applications.The cylinder is double-acting, providing consistent force in both directions of movement. It is equipped with an auto-switch capability, allowing for easy integration into automated systems. The MXH20-15 is part of SMC's renowned MXH family, known for its durability and reliability in various industrial settings.With a bore size of 20mm and a stroke length of 15mm, this cylinder is suitable for a wide range of applications, including material handling, assembly, and packaging. The compact slide table design ensures smooth and precise movement, enhancing the overall efficiency of your automation processes.Engineered to meet the highest industry standards, the SMC MXH20-15 cylinder offers exceptional performance and longevity. Its robust construction and high-quality materials make it a dependable choice for engineers and integrators looking to optimize their systems.

The Bosch Rexroth High-Precision Ball Runner Block BSHP is designed for applications requiring exceptional rigidity and precision. This ball runner block, constructed from low-carbon steel, offers a normal accuracy class and low preload, making it ideal for dynamic applications. It features a flange design with standard height and width, ensuring compatibility with various linear guide rails.Pre-lubricated and maintained with Dynalub 510, the BSHP block guarantees long-lasting performance with minimal maintenance. The integrated complete sealing system provides robust protection against contaminants, enhancing the block's durability. The absence of a ball chain reduces friction fluctuations and ensures smooth operation even under external loads.Installation is versatile, with the ability to mount components from both the top and bottom. The block includes metal-threaded lubrication ports on all sides and a front-side mounting thread for additional components. Its high load capacity and stiffness in all load directions make it suitable for single block applications, providing increased rigidity under lifting and lateral loads.The BSHP block is compatible with all SNS/SNO ball guide rails and can be used for long-term lubrication. It maintains consistent load capacities in all four main movement directions, making it a reliable choice for high-precision linear motion systems.

The MGQM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts. Non-rotating accuracy ranging from +/-0.04 for 100 mm bore to +/-0.08 for 12 mm bore.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGPL is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The high precision ball bushing allows for smooth operation that ensures stable travel resistance, suitable for pushing and lifting applications.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The CXSM series is a dual piston actuator designed for non-rotating accuracy of up to 0.1 mm. This series features a slide bearing type that provides lateral stability, protecting it from side load impacts.With its dual piston design, the CXSM offers enhanced precision and reliability in various industrial applications. The slide bearing type ensures stability even under heavy loads, making it an ideal choice for environments where side load impacts are a concern.

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

The legacy MXQ precision slide table is integrated with guides and rails combined with recirculating bearings to isolate the load bearing from the movement of the dual rods and piston seals. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The CXS Series dual piston actuator offers non-rotating accuracy of 0.1 mm, making it an ideal choice for applications requiring high precision. The CXSM slide bearing type provides lateral stability, protecting the actuator from side load impacts and ensuring reliable operation even in challenging environments.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGPL is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The high precision ball bushing allows for smooth operation that ensures stable travel resistance, suitable for pushing and lifting applications.

The MXSL is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. The ports and stroke adjuster positions are located opposite from the standard MXS in a symmetrical or mirror image of each other to minimize clearance for adjacent mounting applications. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5mm, 0-15mm and 0-25mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGPM is a compact body actuator that integrates internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals. This design provides lateral stability and protection against side load impacts, making it suitable for stopping applications.The cylinder features a carbon steel alloy slide bearing, which enhances its durability and resistance to wear. The MGPM-Z is designed to provide precise and reliable operation in demanding environments.

The legacy MXQ precision slide table is integrated with guides and rails combined with recirculating bearings to isolate the load bearing from the movement of the dual rods and piston seals. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXSL is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. The ports and stroke adjuster positions are located opposite from the standard MXS in a symmetrical or mirror image of each other to minimize clearance for adjacent mounting applications. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5mm, 0-15mm and 0-25mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.