Connettività

This printed circuit board connector is designed for reliable electrical connection in various applications. With a nominal cross-sectional area of 1.5 mm², it offers efficient current handling capabilities while maintaining compact dimensions. The green color provides easy identification in the system.The connector is rated for a nominal current of 8 A and a voltage rating of 160 V (III/2), ensuring safe operation under specified conditions. The contact surface is made of tin, enhancing conductivity and durability.As a female connector, it pairs with male counterparts to establish electrical connections. It supports 13 potentials, arranged in a single row with 13 positions and 13 connections. This configuration allows for flexible system design and expansion.The connector belongs to the FMC 1,5/..-STF product range, featuring a pitch of 3.81 mm. It employs a push-in spring connection method for easy conductor and PCB attachment, with a 0° connection direction. The COMBICON MC 1,5 plug-in system ensures compatibility with other Phoenix Contact components.The connector incorporates screw locking for secure mounting, facilitated by the screw flange. It is packaged in cardboard for safe transportation and storage.

D-SUB plug, 9-pos. socket, two 35° cable entries less than to two terminal block rows, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2,3,7,9; screw connection terminal blocks

The M20 cable gland offers a versatile clamping range of 5 to 12 mm, making it suitable for various applications. Constructed with brass for durability and electrical conductivity, these cable glands provide reliable protection against environmental factors such as dust, water, and corrosion. The clamping ring, made from polyamide (PA), ensures a secure grip on the cables while maintaining flexibility. This combination of materials allows for efficient heat dissipation, minimizing the risk of overheating during operation. In addition to its robust design, this cable gland is IP68 rated and complies with ISO 20653 standards, ensuring it can withstand harsh environmental conditions. The wrench size of 22 adds to its ease of use, making installation straightforward.

Panduit TM3S8-C76 Cable Tie Mounts are designed for applications requiring resistance to environmental stresses such as chemical attack, gamma radiation, ultraviolet radiation and extreme temperatures. Ideal for use in nuclear power facilities and chemical processing plants. These mounts can be used with Standard and L Light-Heavy cross section cable ties. Use with #8 (M4) screws. For indoor or outdoor use, made of Tefzel, are aqua in color, and come in packages of 100.

The MDSTBVA 2,5/10-G-5,08 PCB header is designed for wave soldering and offers a nominal cross section of 2.5 mm², color-coded green, with a nominal current capacity of 10 A and a rated voltage of 320 V (III/2). This male connector features tin contact surfaces and a linear pinning layout. With a pitch of 5.08 mm, this PCB header can accommodate up to 20 potentials in two rows across ten positions, resulting in 20 connections. The COMBICON MSTB 2,5 plug-in system ensures easy alignment with standard pin connector patterns. The solder pins measure 3.9 mm and are positioned at a rate of one per potential. This PCB header is packaged in cardboard for safe storage and transport. Note that it cannot be combined with TMSTBP plug components. For use with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used.

The MLT4H-LP316 self-locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a strong, durable method of cabling bundle. The MLT4H-LP316 cable tie can be used in a wide range of indoor, outdoor, and underground applications. Color Stainless Steel.

Potential distributors, nom. voltage: 250 V, nominal current: 17.5 A, connection method: Push-in connection, 1st, 2nd, 3rd and 4th level, Rated cross section: 1.5 mm², cross section: 0.14 mm² - 2.5 mm², mounting: NS 35/7,5, NS 35/15, color: gray, color of connection elements: blue

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 8, number of rows: 1, number of positions: 8, number of connections: 8, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, number of potentials: 12, number of rows: 1, number of positions: 12, number of connections: 12, product range: FRONT-MC 1,5/..-ST, pitch: 3.81 mm, connection method: Front screw connection, conductor/PCB connection direction: 0 °, number of solder pins per potential: 1, plug-in system: COMBICON MC 1,5, locking: without, mounting: without, type of packaging: packed in cardboard

The IC 2,5/16-GF-5,08 PCB header is designed for high current applications. With a nominal cross-section of 2.5 mm² and a color of green, it can handle up to 12 A with a rated voltage of 320 V (III/2). The contact surface is made of tin, ensuring reliable electrical conductivity. This PCB header is a female connector type, supporting 16 potentials, positions, and connections. It has a pitch of 5.08 mm and is designed for wave soldering with linear pinning.The solder pin [P] measures 3.5 mm, and there are two solder pins per potential. This PCB header is compatible with the COMBICON MSTB 2,5 plug-in system and features standard pin connector pattern alignment. It comes with screw locking and threaded flange mounting for secure installation. The product range is IC 2,5/..-GF, and it is packed in cardboard.

PCB terminal block, nominal current: 16 A, rated voltage (III/2): 400 V, nominal cross section: 1.5 mm², number of potentials: 1, number of rows: 1, number of positions per row: 1, product range: ZFKDS(A) 1,5-W, pitch: 5.08 mm, connection method: Spring-cage connection, mounting: Wave soldering, conductor/PCB connection direction: 45 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 2, type of packaging: packed in cardboard. Single module for the custom grouping of different numbers of positions. An end terminal block is also needed to terminate the block (see accessories). Blocked items with different numbers of positions are also available.

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: MVSTBW 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: -90 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

Sleeve housings, Range of articles: VARIOCON, Sleeve housing, type: VC1, housing material: Polyamide, color: gray. When using fiber optics, the bending radii of the cable manufacturers must be observed.

The MC 1.5/ 8-GF-3.81-LR is a high-quality PCB header designed for robust electrical connections. With a nominal cross section of 1.5 mm², it can handle up to 8 A current and operates at a rated voltage of 160 V (III/2).Constructed with tin contact surfaces, this male connector boasts 8 potentials arranged in a single row across 8 positions, providing a total of 8 connections. The header is part of the MC 1.5/..-GF-LR product range and features a pitch of 3.81 mm.This PCB header is engineered for wave soldering, with a linear pinning layout. Each potential has one solder pin [P] measuring 3.4 mm. It's compatible with the COMBICON MC 1.5 plug-in system and adheres to standard pin connector pattern alignment.The header comes with snap-in locking and is mounted using a lock & release threaded flange. It's available in cardboard packaging, making it convenient for storage and transportation.

Panduit PLT1M-XMR continuously molded cable ties provide constant feeding for high productivity and reduced downtime due to fewer reel changes. Miniature cross section, 4.0” (102mm) cable ties for use with PAT1M4.0 and PDM4.0 system. Made of Nylon 6.6, are natural in color and come 5,000 ties per reel.

Introducing our Polycarbonate Female Screw Termination Inserts, designed for reliable electrical connections. These inserts are rated at a current of 35A and come in a size of 16B, ensuring optimal performance. They feature 6 contacts, providing ample space for multiple conductors.Constructed from high-quality Polycarbonate (PC) material, these inserts offer durability and resistance to environmental factors. The RAL 7032 pebble grey finish adds a touch of elegance while maintaining a professional appearance.The conductor cross-section ranges from 1.5 mm² to 6 mm², accommodating various conductor sizes. Made from copper alloy and silver plated, these inserts offer excellent conductivity and corrosion resistance.

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 13, number of rows: 1, number of positions: 13, number of connections: 13, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

The M12 Data Connector is engineered to support Ethernet/PROFINET CAT5 (100 Mbps) communication, offering a reliable solution for data transmission. This connector features a robust design with a 4-position configuration and shielding, ensuring optimal signal integrity. The M12 Plug, with its D-coding and screw connection, provides secure and efficient cable management. The knurl material is made of Zinc die-cast and nickel-plated for durability and corrosion resistance. The connector also includes a Pg7 Cable Gland, accommodating external cable diameters ranging from 4 mm to 6 mm.

Introducing the M23 Cable Connector, a robust solution designed for optimal performance and reliability. This connector boasts a straight design with shielded capabilities, ensuring seamless data transmission. The Speedcon locking mechanism provides secure connections, while the socket type and solder connection facilitate easy installation.With 16+3 positions, this connector offers ample space for various applications. It supports a cable diameter range of 3mm to 14.5mm, making it versatile for different cable sizes. The coding is N, ensuring compatibility with a wide range of systems.This product adheres to RoHS II without Exemption 6c (Pb

Test disconnect terminal block, nom. voltage: 500 V, nominal current: 41 A, connection method: Screw connection with spring support, 1 level, Rated cross section: 6 mm², cross section: 0.2 mm² - 10 mm² , mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray