Contattori e relè

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This single-phase solid state relay is designed for DIN rail mounting and is part of the Harmony modular relay series. It has a power rating of 30 A and is equipped with a zero voltage switching output mode. The control circuit operates within a voltage range of 4 V to 32 V DC, while the load output can handle voltages from 48 V to 660 V AC, making it suitable for various applications including packaging, plastic molding, textiles, and heating furnaces. It features a control input voltage LED indicator that is illuminated in green, indicating the operational status. The relay is maintenance-free and boasts unlimited lifespan due to its fully electronic construction. With a weight of 280 g and dimensions of 22.5 mm in width, 98.8 mm in height, and 97.7 mm in depth, it can be easily integrated into existing setups. The product carries an IP20 protection index and a maximum leakage current of 1 mA in the off-state, ensuring safe operation. It supports symmetrical DIN rail mounting, and installation is facilitated by screw terminals capable of accommodating wire sizes between AWG 24 and AWG 10. The relay also delivers a maximum surge current of 1200 A for 16.6 ms and has a response time of 0.5 cycles for both turn-on and turn-off operations. The product complies with multiple certifications including CSA, UL, and EAC, in addition to meeting relevant environmental standards.

The CR-U230AC2 pluggable interface relay is from the CR-U (universal) relay range. This relay operates with a 230 V AC rated control supply voltage and has 2 c/o (SPDT) output contacts rated at 250 V / 10 A. The relay has an integrated orange test button for manual actuation and locking of the output contacts. Standard sockets, pluggable function modules, holder and marker are available as accessories.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200 to 208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.08 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor is a versatile component that can be used to create motor starters for various applications. It is available in 13 contactor ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 25A inductive 3 pole IEC contactor can be mounted on DIN rail or directly on a panel. It is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC, and 20HP at 600VAC three phase. For single phase applications, it is rated for 2HP at 115VAC and 3HP at 240VAC. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, it can have a SCCR up to 100kA. The contactor is supplied with a 415 VAC 50/60 Hz coil and has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. The contactor is 3.35 inches tall, 1.77 inches wide, and 3.62 inches deep, weighing 0.82 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh.

The TeSys D reversing contactor is a reliable solution for motor control applications, capable of handling up to 9A/690V AC-3 (4kW@400V). It features 115V 50/60Hz AC coils and built-in auxiliary contacts with NC mirror certification. The contactor is designed for operating rates up to 3600 cycles/hour and can withstand environments up to 60°C.Constructed with screw clamp terminals, this compact (90mm width) contactor offers DIN-rail mounting or screw fixing. It comes with pre-wired reversing power connections and mechanical interlock (without electrical interlocking).Certified to multi standards including IEC, UL, CSA, CCC, EAC, and Marine, this contactor is also Green Premium compliant, adhering to RoHS/REACh regulations.

This control relay features a configuration of 5 contacts (3NO + 2NC) with a rated operational voltage of up to 690 V AC and a control circuit voltage of 24 V DC. It operates effectively at ambient temperatures between -40°C and +60°C, with the ability to handle high operating rates of up to 180 cycles per minute. The dimensions of the relay are compact, measuring 45 mm in width, and it can be mounted on a 35 mm DIN rail or secured using screws.The relay is designed for the control of electromagnetic loads in accordance with AC-15/DC-13 utilization categories and is compliant with multiple international standards, including IEC, UL, and CSA. It ensures high durability with a mechanical lifespan rated at 30 million cycles. Furthermore, it features spring terminals for easy connection of cables ranging from 1 to 2.5 mm², accommodating both flexible and solid wires.Notably, the device includes a rated impulse withstand voltage of 6 kV and a short-time withstand current capability of up to 140 A for 100 ms. Its robust construction allows it to withstand mechanical shocks and vibrations, making it suitable for various applications across industrial settings. This product is compliant with Green Premium standards, reflecting its environmentally friendly design.

The TERMSERIES TRS 24VDC 1NO HC is a reliable relay module designed for industrial applications. It features a single normally open (1 NO) contact, rated at 24 V DC ±20% with a continuous current capacity of 16 A.The screw connection ensures easy installation and maintenance. This module is an excellent choice for controlling electrical loads in various industries where high-performance relay modules are required.

TeSys LRK thermal overload relay, 16A/690V, thermal setting range 12-16A, tripping class 10A, for protection of 3-phase motors 7.5kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test slide switch for simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K16. Mounting on DIN rail, separated from the contactor, with use of a terminal block LA7K0064 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).

Contactor,IEC,Sirius,Standard 3 Pole,Non-Reversing 220 - 240 AC/DC Coil Frame Size S12,500A Panel Mount 2 NO & 2 NC Auxiliaries No Suppression Lugs (Not Included) Terminals UL File E31519 in Vol.11 Sec. 4

The TeSys Deca Contact Relay is designed for seamless integration into control systems, providing reliable motor control solutions. This 32A inductive 3-phase IEC contactor can be mounted on DIN rail or directly to a panel, making it adaptable to various applications.This contact relay is available in multiple ratings for inductive and resistive loads, with a maximum capacity of 150 full-load amps and 200 amps respectively. It offers both horsepower and Kw motor rating for international acceptance, ensuring compatibility across different power systems.The contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase, and 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, it can handle SCCR up to 85kA. With up to a 600VAC 80A Class J or CC fuse, it can manage SCCR up to 100kA.The contactor comes with a low consumption 24VDC coil and a transient suppressor module for enhanced performance. It also features one normally open and one normally closed auxiliary contact as standard, with the NC contact being mirror certified. Screw clamp terminals are used for load and auxiliary connections.The TeSys Deca Contact Relay is 3.35 inches tall, 1.77 inches wide, and 3.98 inches deep, weighing 1.18 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, as well as RoHS/REACh, making it a Green Premium product.

TeSys F contactor, 3 poles (3NO), 780A/1000V AC-3, for motor applications up to 400kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 600 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The universal plug-in relay is designed for applications requiring reliable control with a 12V DC coil voltage. It incorporates 2 changeover contacts (double pole double throw) with a maximum switching capacity of 2500 VA and an operating current of 10A. The relay's construction allows for installation in various positions and environments, providing a versatile solution for automation systems.With an operating temperature range of -40 to 55 °C and IP40 protection, it is suitable for harsh industrial conditions. The relay offers a lockable test button for simplified operation testing. Additionally, it supports hard-wired logic systems and is compatible with programmable logic controllers (PLCs), enhancing its utility in complex automation setups.Notably, the design includes a transparent cover, facilitating visual inspection of contact status. The dielectric strength ratings are significant, with 1500 V AC between contacts and 2500 V AC between coil and contact, ensuring safe operation. The product complies with various industry standards, including UL and CSA, and is classified under pollution degree 3.

The RCI484AC4 relay, part of the RIDERSERIES, is constructed with 2 CO contacts and includes a lockable test button. It operates at a rated control voltage of 24 V DC and supports a continuous current of 8 A, making it suitable for various control applications.Measuring 13 mm in width, 29 mm in height, and 26.7 mm in depth, this relay has a net weight of 18.672 g. The plug-in connection method allows for easy integration into existing systems, with a pitch of 5 mm.With a mechanical service life rated at 5 x 106 switching cycles for AC coils and 10 x 106 for DC coils, the relay ensures durability and reliability. The protective circuit includes a free-wheeling diode, and the status indicator features a green LED for visual feedback.In terms of insulation, the device complies with IEC 61810-1 and UL508 standards, with a dielectric strength of 5 kV for input/output isolation. Its operating temperature range spans from -40 °C to 70 °C, ensuring functionality across diverse environments. The relay is also rated for a maximum switching voltage of 240 V AC and can handle an inrush current of 15 A for up to 4 seconds.Designation Code: E224238.

The SIRIUS Safety Relay Output Extension is designed to expand the output capabilities of your existing safety relay. This module features four relay outputs and relay enabling circuits, providing you with increased flexibility in your automation systems.In addition to the relay outputs, this extension also includes four normally open (NO) contacts and a relay signaling circuit. The relay signaling circuit allows for easy monitoring of the relay's status, while the NO contacts can be used to trigger additional actions or events in your system.This module is compatible with 24 V AC screw connection, ensuring reliable and efficient operation in your automation systems. With its compact design and robust construction, this extension is a valuable addition to any industrial automation setup.

Solid State Contactor,SIRIUS SC 1 Pole 20 Amps at 400 VAC to 600 VAC 24 VDC Coil DIN Rail or Panel Mount Screw Terminals 22.5 mm Relay Width 22.5mm Heat Sink Width Instantaneous Switching UL File E143112 in Vol.1 Sec.8

The TeSys D contactors are designed for seamless integration into control systems, offering versatility across different applications. They come in various ratings, supporting inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 32A IEC contactor can be mounted on DIN rail or directly on a panel. The contactor boasts both Horsepower and Kw motor ratings for international acceptance. It is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC, and 30HP at 600VAC three-phase. For single-phase applications, it is rated for 2HP at 115VAC and 5HP at 240VAC. When paired with a 480VAC up to 60A circuit breaker, the contactor can handle SCCR up to 85kA. With a Class J or CC fuse up to 600VAC 80A, it can manage SCCR up to 100kA. The contactor comes with a 220VAC 50/60Hz coil and features one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories ensures compatibility with most applications. The contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, weighing 0.83 lbs. The TeSys Deca IEC contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the RoHS/REACh requirements, making it a Green Premium product.

The TeSys K contactor features three poles and is optimized for motor control applications with a rated operational current of 6 A at voltages up to 440 V AC. Its compact design, measuring only 45 mm in width, allows for DIN-rail or panel mounting, facilitating integration into various control systems.With a 24V DC control circuit voltage, the contactor enables effective management of motor power, supporting motor ratings of 1.5 kW at 220...230 V AC, 2.2 kW at 380...415 V AC, and 3 kW at 440/690 V AC, across different utilization categories including AC-3 and AC-4. The device is equipped with one normally closed auxiliary contact (1 NC), enhancing its functionality.Designed for operation in ambient temperatures ranging from -25°C to 50°C and capable of withstanding storage temperatures as low as -50°C and up to 80°C, this contactor is suitable for diverse applications. Additionally, it has an IP2X protection degree and complies with multiple international standards such as IEC, UL, and CSA, ensuring reliability in various environments.Certification as a Green Premium product indicates compliance with sustainability and environmental regulations, including RoHS and REACH. The contactor also offers significant electrical durability, rated for 1.3 million cycles at 6 A under AC-3 conditions, further ensuring long service life.

The Digital Monitoring Relay for 3-Phase Power Supply is an advanced device that monitors the voltage phase sequence of a 3-phase power supply. It can activate in response to phase failure, providing a reliable solution for maintaining consistent power delivery.This relay operates within a voltage range of 160 to 690 V at frequencies between 50 and 60 Hz. It offers protection against both undervoltage and overvoltage conditions, with hysteresis settings ranging from 1-20 V and response times of 0-20 s.The relay features a spring-type connection system for easy installation and maintenance. It includes two COs (current output) for Umin and Umax, providing accurate and timely information on the power supply's voltage levels.

The TeSys D contactors are designed for seamless integration into control systems. They offer versatility in various applications, supporting motor ratings up to 150 full-load amps and resistive loads up to 200 amps.This 50A inductive 3 pole IEC contactor is suitable for mounting on DIN rail or directly on a panel. It boasts both Horsepower and Kw motor ratings, ensuring international acceptance.The contactor can handle up to 100kA SCCR when used with a 480VAC up to 110A circuit breaker or a 600VAC 110A Class J or CC fuse. It comes with a 115 VAC 50/60 Hz coil and has one normally open and one normally closed auxiliary contact built-in as standard.The contactor measures 4.80 inches in height, 2.17 inches in width, and 4.72 inches in depth, weighing 1.87 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a Green Premium product.