Contattori e relè

The TeSys Deca contactor is a versatile solution that can be used to create motor starters for diverse applications. It is available in 13 contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or directly on a panel. It is rated for various horsepower and kilowatt (Kw) motor ratings, ensuring international acceptance. The contactor is designed to handle high currents and voltages, with a maximum SCCR of 100kA when used with the appropriate fuses or circuit breakers. It comes with a 110VAC 50/60Hz coil and has one normally open (NO) and one normally closed (NC) auxiliary contact built-in as standard. The contactor is compact, measuring 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth, and weighs only 0.71 lbs. It is certified to various international standards, including UL, CSA, IEC, CCC, EAC, and Marine, and meets the RoHS/REACh requirements.

The SIMIREL Temperature Monitoring Relay is a versatile device designed for monitoring temperature ranges from -58°F to 932°F. It supports three sensor types: PT100/1000, KTY83/84, and NTC. The relay offers two threshold values that can be digitally adjusted, providing a high degree of flexibility in monitoring temperature conditions.The device operates on a control voltage of 24V AC/DC and features screw terminals for easy installation. It measures the temperature using PT100/1000 sensors and provides an output of 2 x 1 CO + 1 NO, with a width of 45 mm.It's important to note that this product is no longer in production. The recommended successor is the 3RS2600-1BA30.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This safety relay is specifically engineered for emergency stop and safety door monitoring applications, adhering to the highest standards of safety such as SIL 3 or Category 4, and PL e in compliance with EN ISO 13849.The relay operates either in single-channel or two-channel mode, providing up to 8 enabling current paths. It is designed for a voltage supply of 24 V DC, making it compatible with various systems.The relay features a pluggable Push-in terminal block for easy installation and maintenance. This design ensures reliable electrical connections and simplifies the process of replacing or upgrading components.

TeSys LRD overload relays are designed to be used with TeSys D contactors to make a motor starter. This overload relay can be used with 80 amp through 95 amp TeSys D contactors. These differential thermal overload relays detect over currents in the lines to the motor. When an overcurrent is detected the overload relay working with the contactor will disconnect the power to the motor. This will minimize the damage to the motor windings. This overload relay has an adjustable trip current rating of 48 to 65 amperes. This trip current rating is calibrated per Class 10A. Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

Schneider Electric's TeSys Deca Thermal Overload Relays are designed for the protection of 3-phase motors up to 7.5kW at 400V. These relays feature a thermal setting range of 12-18A and tripping class 10A, making them suitable for a wide range of applications. These non-differential devices can be used with unbalanced loads and provide a thermal adjustment dial, manual-automatic reset selector, test selector for simulation of a tripping, reset and stop buttons, flag indicator, and 2 auxiliary contacts (1NO+1NC) for fault signaling. The settings are protected by a transparent cover that can be locked with a sealing. Connection is made through screw clamp terminals, which connect directly to the bottom terminals of 3-pole contactors LC1D18-D38. These relays can be mounted on DIN rail or screw fixing, separated from the contactor, with the use of a terminal block LAD7B106 (to be ordered separately). The TeSys Deca Thermal Overload Relays are multi-standard certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), and Green Premium compliant (RoHs/Reach).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The Deca control relay features five normally open (5NO) contacts and is rated for operational voltages up to 690V AC. It is capable of handling a maximum current of 10A and is specifically designed for controlling electromagnetic loads in applications categorized as AC-15 and DC-13.With a control circuit voltage of 220V at 50/60Hz, this relay supports screw clamp terminal connections for ease of installation. It operates effectively under high operational rates, achieving up to 180 cycles per minute, and can function within a broad ambient temperature range of -40°C to +60°C. This ensures high reliability and durability in various environments.The compact design, measuring 45mm in width, allows for easy mounting on a 35mm DIN rail or can be fixed by screw. It is certified according to multiple international standards, including IEC, UL, CSA, CCC, and EAC, making it suitable for a variety of applications. Notably, it complies with the Green Premium standards, ensuring an environmentally conscious choice for industrial applications.

This Harmony RM22-UA relay allows monitoring of voltage control in single phase networks. This modular multi function single phase voltage control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market slim form-factors with 22.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a diagnostic button, sealable cover, simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0

The AC-3 Power Contactors are designed for high power applications, capable of handling up to 11kW at 400V. These contactors feature 2 Normally Open (NO) and 2 Normally Closed (NC) terminals, making them suitable for a wide range of industrial control systems. With a voltage rating of 230V AC at 50/60Hz, these contactors are designed to operate in various environments. They come with a removable auxiliary switch, which adds flexibility to your system design. The SZ S0 screw terminal design allows for easy installation and maintenance, while the 3-pole configuration ensures reliable power distribution.

This Harmony REXL ON-delay timer can be set between 0.1 seconds and 100 hours. It provides function A and it uses plug-in mounting. This modular ON-delay timer is ideal for providing timing control in automation systems such as automatic door opening, alarm, lighting in toilets and car park barriers. It is a plug-in device, meaning it is quick and easy to install with the need for tools. It also offers a sealable cover, simple and precise settings with rotary trimmers. It is designed for socket plug in, this allows quick and easy installation and minimizes set up and repair time. Single function timer for a simple integration in hard-wired logic schematics, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0

TeSys GV auxiliary contact block, for motor circuit breakers GV2 and GV3. 1NC fault signaling contact + 1NO instantaneous auxiliary contact. Instantaneous auxiliary contact rated for operation up to 6A/690V AC and 6A/240V DC. Fault signaling contact rated for operation up to 2A/240V AC and 1A/60V DC. To be installed on left-hand side of the circuit breaker (1 block mounting maximum), connection by screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The SIRIUS interface module is designed for use in modular safety systems. It features a PROFIBUS DP interface operating at 12 Mbps and supports RS485 communication. The terminal is of the spring-type, ensuring reliable connection with an overall width of 45 mm.This interface module can be parameterized via Safety ES without the need for a connection cable. This feature enhances its versatility and ease of use in various industrial automation applications.

The CT-ERD.12 is a single-function electronic time relay from the CT-D timer range. It provides an ON-delay (delay on make) function with 7 time ranges from 0.05 s to 100 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 6 A.

The HK1-20 Auxiliary Contact is designed to change position alongside the main contacts of manual motor starters such as MS116, MS132, and MS165. This auxiliary contact is available in both normally open and normally closed configurations, facilitating a variety of operational needs.With a rated operational voltage of 690 V AC and 600 V DC, the contact supports a range of operational currents, allowing for flexibility in applications. Specifically, it accommodates up to 6 A at 24 V AC and 4 A at 240 V AC. The device ensures high reliability with an electrical durability rated for 100,000 cycles, making it suitable for frequent use.In terms of installation, the HK1-20 features screw terminals with a connecting capacity for both flexible and rigid wires, ensuring secure connections. The product measures 9 mm in width, 90 mm in height, and 78.5 mm in depth, with a weight of 0.035 kg, which facilitates easy integration into existing setups.Designed for environmental resilience, the auxiliary contact operates effectively within an ambient temperature range of -25 °C to +60 °C and can withstand storage temperatures between -50 °C and +80 °C. It also complies with multiple international standards, including IEC/EN 60947-1 and UL 508, ensuring its suitability for global applications.

LC2D12E7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 12A AC-3 5.5kW@400V, it includes a 48V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D12E7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 5.5kW@400V. It includes a 48V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 48V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 2 million cycles at 12A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connection by screw clamp terminals.

The plug-in relay, designed for power applications, operates at a coil control voltage of 24V AC and is equipped with 3 changeover contacts (3PDT) capable of handling a current rating of 15A. This model features an LED indicator that provides a visual status of the relay, enhancing usability in various lighting conditions.With a compact design, this relay helps minimize enclosure size while improving machine reliability. It is suitable for integration into hard-wired logic automated systems, complementing the functionality of industrial programmable logic controllers (PLCs). The IP40 protection rating ensures its reliability in diverse environments.Furthermore, the relay demonstrates excellent durability with an electrical lifespan of 100,000 cycles under resistive load, and a mechanical durability of 10,000,000 cycles. It operates effectively across a temperature range of -40°C to 55°C and can withstand vibrations up to 3 gn. The device includes a lockable test button for secure operation.

This auxiliary switch is designed for front mounting and includes 2 normally open (NO) and 2 normally closed (NC) contacts. The current paths are configured as 1 NC, 1 NC, 1 NO, and 1 NO. It is compatible with S00 and S0 sizes and utilizes spring-loaded terminal connections for efficient wiring.The device operates within a temperature range of -25 to +60 °C and supports an electrical endurance of up to 200,000 operating cycles at AC-15, rated at 230 V. With a mechanical service life of approximately 10 million cycles, it is engineered for reliability in demanding environments. The insulation voltage rating is 690 V, while the device is rated IP20 for protection class.Installation is facilitated through snap-on mounting, with dimensions measuring 41.5 mm in height, 36 mm in width, and 47.7 mm in depth. The auxiliary switch adheres to safety standards outlined in IEC 60947-4-1 and IEC 60947-5-1, ensuring positively driven operation and mirror contact functionality. This unit's design supports a variety of conductor sizes from 0.5 to 2.5 mm², allowing for flexible wiring options.

The power plug-in relay operates on a control voltage of 48V AC and is equipped with a single changeover contact (SPDT) rated for 15A. It offers a variety of contact configurations suitable for high-current applications, enhancing the sizing of enclosures and improving machine reliability. This relay can be installed in diverse locations and supports easy maintenance due to its plug-in design.Designed for compatibility with hard-wired logic automated systems, it complements the functionality of industrial programmable logic controllers (PLCs). The relay's features include a lockable test button for control, an operational temperature range of -40 to 55 °C, and a mechanical durability of up to 10 million cycles.With a rated insulation voltage of 250 V conforming to IEC standards and a maximum switching capacity of 3750 VA, the relay operates effectively with a variety of loads, including resistive and inductive. Its compact size and robust performance make it suitable for numerous industrial applications.

TeSys K Contactors: The Schneider Electric TeSys K contactor is a versatile and reliable solution for non-inductive load control applications. With a capacity of up to 20A/690V AC-1, this compact (45mm width) device offers a 24V 50/60Hz AC coil without built-in auxiliary contact, ensuring optimal performance and flexibility. Featuring connection by screw clamp terminals, the TeSys K contactor is designed for operating rates of up to 600 cycles per hour and can withstand environments up to 50°C. Its multi-standard certification (IEC, UL, CSA, CCC, EAC) and Green Premium compliance (RoHS/REACh) make it a reliable choice for standard applications. Key Features: 2 poles (NO + NC) Up to 20A/690V AC-1 capacity 24V 50/60Hz AC coil without built-in auxiliary contact Compact design (45mm width) DIN-rail mounting or screw fixing Multi-standard certified (IEC, UL, CSA, CCC, EAC) Green Premium compliant (RoHS/REACh)