Contattori e relè

The CM-SRS.M2S is a versatile current monitoring relay, part of the CM single-phase monitors range. This device operates under a control supply voltage ranging from 24 to 240 V AC/DC and features a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A.It employs a RMS measuring principle for both DC and AC currents, providing three measuring ranges: 0.3-1.5 A, 1-5 A, and 3-15 A. The relay offers the flexibility to monitor overcurrent or undercurrent, with an open- or closed-circuit operating principle, including options for latching function.The hysteresis is adjustable within a range of 3 to 30% of the threshold value. The tripping delay and start-up delay are also customizable, ranging from instantaneous to 30 seconds (0, 0.1-30 s). A transparent cover for protection against unauthorized changes is available as an accessory.The device features screw connection technology with double-chamber cage connection terminals.

This product is a Contactor of Size 2, designed for 2-pole operations. It comes with DC-3 and 5 ratings, capable of handling up to 32 A of auxiliary contacts. The auxiliary contacts are 22 in number, featuring both Normally Open (2 NO) and Normally Closed (2 NC) configurations. This Contactor is designed for AC operation at 110V with a frequency of 50Hz or 132V with a frequency of 60Hz.

The TeSys F contactor, with its 3 poles and a rating of 265A/1000V AC-3, is designed for robust motor applications. It can handle power up to 132kW at 400V. This contactor offers a low sealed consumption coil that operates on 48V AC at frequencies ranging from 40 to 400Hz. The bolt terminals are suitable for connecting bars or cables with lugs, ensuring easy installation and maintenance. With its drawer-mounted coil design, this contactor provides convenience during installation and maintenance. It is also designed to operate reliably under high rates of up to 2400 cycles per hour and in environments with temperatures up to 55°C.The TeSys F contactor comes with a large selection of add-on blocks and accessories (to be ordered separately) for added functionality. It is certified to multiple standards including IEC, UL, CSA, CCC, EAC, and Marine, ensuring its compliance with various industry regulations. Additionally, it is Green Premium compliant, adhering to RoHS/REACh directives.

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB320, LUB380, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 15kW@400V. It provides full protection to motors with a rated current Ir 8-32A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This safety relay is designed for monitoring Emergency stop and Guard switch. The safety relay is powered with 24V AC/DC, and equipped with a screw removable terminal block. This basic safety modules embeds pre-defined safety functions. This safety relay embeds 1 control output, 4 NO safety outputs, and 2 NC diagnostic outputs. The maximum safety level achieved by this safety relay is PLe/Category 4 conforming to ISO13849-1, SILCL 3 conforming to IEC62061, SIL 3 conforming to IEC61508. This safety relay weighs 0,200kg. Its dimensions are 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relays is suitable for applications such as Food and Beverage, Hoisting, Material Handling, Material Working, Packaging. This safe relay conforms to IEC 60947-5-1, IEC 61508-1, IEC 61508-2/-3, ISO 13849-1, IEC 62061 functional safety standards, is certified by cULus, TÜV. Harmony safety relays are compatible with Modicon logic controllers. This relay is mounted on a 35mm symmetrical DIN rail. Harmony XPS Basic and Universal safety relays are the first choice for managing single safety functions easily, typically in machines of simple to medium complexity. Harmony XPS Basic offers the most optimised solution for applications with hardwired safety modules.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AF52-30-00-13 is a 3 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 22 kW / 400 V AC (AC-3) or 40 hp / 480 V UL and switching power circuits up to 100 A (AC-1) or 80 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The AF116-30-11-13 is a versatile contactor designed for controlling motors up to 55 kW / 400 V AC (AC-3) or 75 hp / 480 V UL and switching power circuits up to 160 A (AC-1) or 160 A UL general use. This contactor is equipped with pre-mounted auxiliary contacts and double clamp, making it suitable for a wide range of applications. The AF technology incorporated in this contactor allows it to operate within a wide control voltage range (100-250 V 50/60 Hz and DC), effectively managing large control voltage variations. This feature helps reduce panel energy consumption and ensures distinct operations even in unstable networks. The contactor also features built-in surge protection, providing a compact solution for your needs. With its block type design, the AF116-30-11-13 can be easily extended with add-on auxiliary contact blocks and a variety of accessories.

Solid State Contactor,SIRIUS SC 1 Pole 50 Amps at 24 VAC to 230 VAC 24 VDC Coil DIN Rail or Panel Mount Screw Terminals 22.5 mm Relay Width 67 mm Heat Sink Width Instantaneous Switching UL File E143112 in Vol.1 Sec.8

The CT-AWE is a single-function electronic time relay from the CT-E timer range. It provides an impulse-OFF (trailing edge interval) function with a time range from 0.3 s to 30 s. This time relay operates with a rated control supply voltage of 24 V AC / DC and has a 1 c/o (SPDT) output rated at 250 V / 4 A. A control input works with voltage-related (non-floating) triggering.

Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL3 /PL e, and screw connection.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This Modicon MCM safe mixed I/O expansion module has 8 digital inputs, 2 start/restart interlock inputs, 2 output OSSD pairs, 4 test outputs and 2 status outputs and is fitted with captive screw clamp terminals. It is designed to monitor remotely your safe I/O. It is furnished with screw clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. This safe mixed I/O module figures configurable filters and delays for each single input, configurable output activation and de-activation delays, independent control of pairs of outputs, and configurable diagnostic output signals. This module figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, input and output status). This safe I/O module is connected to the safety controller via the backplane expansion connector. It weighs 0.25kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This safe I/O module is certified by RCM, CULus and TÜV. It can reach such safety levels as category 4 conforming to EN/ISO 13849-1, PLe conforming to EN/ISO 13849-1, Type 4 conforming to EN/IEC 61496-1, and SILCL3 conforming to IEC 62061. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The module instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.

The CM-PBE is a robust and reliable phase loss monitoring relay designed for industrial applications. It offers single or three-phase operation, with a width of 22.5mm and a neutral connection. The relay measures the voltage range between L1,L2,L3-N at 220-240VAC, powered by the measuring circuit. It operates on the closed circuit principle, providing a single normally open (n/o) output. This relay is ideal for monitoring phase loss and undervoltage in three-phase systems.Key Features:Single or Three-Phase OperationNeutral ConnectionMeasuring Range: L1,L2,L3-N=220-240VACPowered by Measuring CircuitClosed Circuit Principle (1 n/o)

The Solid State Relay is a high-performance semiconductor relay designed for industrial applications. With a width of 45mm, it offers a compact size that fits seamlessly into various control systems. The relay can handle up to 50A at voltages ranging from 48-460V and 24V DC, making it suitable for a wide range of power levels. Key Features: 1-phase operation Screw terminals for easy installation UL File E143112 in Vol.1 Sec.8

The TeSys Deca IEC Contact Relay is an advanced solution designed for seamless integration into control systems. This contactor can be utilized to create motor starters for a diverse array of applications, making it a versatile choice. The TeSys Deca IEC Contact Relay is available in 13 different contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific model, rated at 95A for inductive loads, can be mounted on DIN rail or directly onto a panel. This contactor boasts both Horsepower and Kw motor rating for international acceptance. It is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC, and 60HP at 600VAC three-phase applications. Additionally, it can handle 7.5HP at 115VAC and 15HP at 240VAC single-phase loads. The contactor is equipped with a 220 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified, and screw clamp terminals are used for load and auxiliary connections. The TeSys Deca IEC Contact Relay measures 5.00 inches in height, 3.35 inches in width, and 5.12 inches in depth, weighing approximately 3.55 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200 to 208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.73 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The LX1D8 is an AC coil designed for use with TeSys D contactors, specifically compatible with models LC1D115 and LC1D150. It operates within voltage limits of 0.8 to 1.15 Uc and is suitable for ambient temperatures ranging from -5°C to 60°C. This coil features an integral suppression device as standard and complies with Green Premium regulations.With an average resistance of 4377 Ohms at 20°C and an inductance of 109.69 H, the LX1D8 supports a maximum operating rate of 1200 cycles per hour at 60°C, ensuring reliable performance in demanding environments. Its mechanical durability extends to 8 million cycles, making it a robust component for control circuits. The coil's hold-in power consumption ranges from 2 to 18 VA, while it requires inrush power of 280 to 350 VA, depending on the frequency.Designed without a built-in suppressor module, this coil dissipates heat between 3 to 4.5 W at 50/60 Hz. It is also free from mercury and aligns with various safety regulations, including RoHS compliance, and is manufactured in the Czech Republic.

The CR-P120AC1 pluggable interface relay is a component from the CR-P relay range designed for PCB applications. It operates with a control supply voltage of 120 V AC and supports a rated operational voltage of 400 V AC. The relay provides a single changeover (SPDT) output contact rated at 250 V / 16 A, making it suitable for various control tasks.With dimensions of 12.7 mm in width, 15.7 mm in height, and 29 mm in depth, it has a net weight of only 0.014 kg. The relay features soldering pin terminals and complies with IEC/EN 61810-1 standards, ensuring reliability and performance in industrial applications. Additionally, its degree of protection is rated at IP67, allowing it to function effectively in demanding environments.For ambient conditions, it can operate within a temperature range of -40 to +70 °C and can be stored at temperatures up to 85 °C. The relay is compliant with the RoHS directive, adhering to environmental standards. The CR-P120AC1 is an optimal choice for those requiring durable and efficient relay solutions.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.