ATV71HC28N4D
- Nuovo1 pz.
Filtri
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 480 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 480 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
This connection cable has a PVC cable (10 meter cable). This pre-wired pigtail cable with one connector helps you to reduce your stock of spare process parts. It can can fit most installations thanks to its 10m length.
This connection cable has a PVC cable (10 meter cable). This pre-wired pigtail cable with one connector helps you to reduce your stock of spare process parts. It can can fit most installations thanks to its 10m length.
CONTACTOR, AC-3, 18.5KW/400V, 2NO+2NC AC110V 50HZ/120V 60HZ 3-POLE, SZ S0 SPRING-LOADED TERMINAL PERMANENT AUX. SWITCH FOR SUVA APPLICATIONS
CONTACTOR, AC-3, 18.5KW/400V, 2NO+2NC AC110V 50HZ/120V 60HZ 3-POLE, SZ S0 SPRING-LOADED TERMINAL PERMANENT AUX. SWITCH FOR SUVA APPLICATIONS
Circuit breaker size S0 for starter combination Rated current 1.6 A N-release 21 A Spring-type terminal Standard switching capacity
Circuit breaker size S0 for starter combination Rated current 1.6 A N-release 21 A Spring-type terminal Standard switching capacity
Basic switch without actuator head Metal enclosure, 56 mm wide ASIsafe integrated AS-i status: 1:F-IN1, 2: F-IN2 3:AS-i/FAULT Slow-action contacts 1 NC with M12 connector 4-pole Channel 1 to NC, Channel 2 to M12 socket on the right
Basic switch without actuator head Metal enclosure, 56 mm wide ASIsafe integrated AS-i status: 1:F-IN1, 2: F-IN2 3:AS-i/FAULT Slow-action contacts 1 NC with M12 connector 4-pole Channel 1 to NC, Channel 2 to M12 socket on the right
Coordinate switch. 22mm. round. metal. shiny. black. 2 switch positions. vertical mom. contact type. with mechanical interlock in the o position. with holder. 1NO. 1NO. screw terminal
Coordinate switch. 22mm. round. metal. shiny. black. 2 switch positions. vertical mom. contact type. with mechanical interlock in the o position. with holder. 1NO. 1NO. screw terminal
SIPLUS ET 200SP F-RQ 24 V DC/24-230 V AC/5 A -25...+60 °C Start-up -25 °C with conformal coating based on 6ES7136-6RA00-0BF0 . F-RQ 1x 24 V DC/24..230V AC/5A ST. 20 mm overall width. 1 relay output (2 NO) Summation output current 5 A. load voltage 24 V DC and 24.. 230 V AC. Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6AG1136-6DB00-2CA0) F-DQ
SIPLUS ET 200SP F-RQ 24 V DC/24-230 V AC/5 A -25...+60 °C Start-up -25 °C with conformal coating based on 6ES7136-6RA00-0BF0 . F-RQ 1x 24 V DC/24..230V AC/5A ST. 20 mm overall width. 1 relay output (2 NO) Summation output current 5 A. load voltage 24 V DC and 24.. 230 V AC. Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6AG1136-6DB00-2CA0) F-DQ
SIPLUS ET 200SP, BASEUNIT BU15-P16+A0+2D, BU-TYPE A0, -40 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7193-6BP00-0DA0 . PUSH-IN TERMINALS, W/O AUX-TERMINALS, NEW LOADGROUP, WXH: 15MMX117MM
SIPLUS ET 200SP, BASEUNIT BU15-P16+A0+2D, BU-TYPE A0, -40 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7193-6BP00-0DA0 . PUSH-IN TERMINALS, W/O AUX-TERMINALS, NEW LOADGROUP, WXH: 15MMX117MM
SIMATIC WinCC Professional 512 PowerTags V15. Upgrade V11..V14 -> V15 or V11..V14 Combo-> V15 Combo; engineering software in TIA Portal; floating license; software and documentation on DVD; license key on USB stick; class A; 6 languages: GE.EN.IT.FR.ES.ZN; executable under Windows 7 (64 bit). Windows 10 (64 bit). WinSrv 2012 R2/2016 (64 bit) for configuration of SIMATIC Panels. WinCC Runtime Advanced. WinCC Runtime Professional (up to 512 PowerTags)
SIMATIC WinCC Professional 512 PowerTags V15. Upgrade V11..V14 -> V15 or V11..V14 Combo-> V15 Combo; engineering software in TIA Portal; floating license; software and documentation on DVD; license key on USB stick; class A; 6 languages: GE.EN.IT.FR.ES.ZN; executable under Windows 7 (64 bit). Windows 10 (64 bit). WinSrv 2012 R2/2016 (64 bit) for configuration of SIMATIC Panels. WinCC Runtime Advanced. WinCC Runtime Professional (up to 512 PowerTags)
WINCC/WEBUX MONITOR. 10 CLIENT LICENSES (COUNTABLE). OPTION F. WINCC AS OF V7.4 . RUNTIME-SW. SINGLE LICENSE. LICENSE KEY DOWNLOAD. ON SERVER SIDE WINDOWS 64 BIT REQUIRED E-MAIL ADDRESS IS MANDATORY FOR DELIVERY!
WINCC/WEBUX MONITOR. 10 CLIENT LICENSES (COUNTABLE). OPTION F. WINCC AS OF V7.4 . RUNTIME-SW. SINGLE LICENSE. LICENSE KEY DOWNLOAD. ON SERVER SIDE WINDOWS 64 BIT REQUIRED E-MAIL ADDRESS IS MANDATORY FOR DELIVERY!
CONNECTING CABLE UNSHIELDED F0R SIMATIC S7-300/400 BETWEEN FRONT CONNECTOR MODULE A. TERMINAL BLOCK 16 X 0.14MM2 WITH IDC CONNECTORS, LENGTH 1.0 M
CONNECTING CABLE UNSHIELDED F0R SIMATIC S7-300/400 BETWEEN FRONT CONNECTOR MODULE A. TERMINAL BLOCK 16 X 0.14MM2 WITH IDC CONNECTORS, LENGTH 1.0 M
SIMATIC NET, PROFIBUS PLASTIC FIBER OPTIC,SIMPLEX CONNECTORS/ POLISHING SET,CONT.100 SIMPLEX- CONNECTORS AND 5 POLISHING SETS
SIMATIC NET, PROFIBUS PLASTIC FIBER OPTIC,SIMPLEX CONNECTORS/ POLISHING SET,CONT.100 SIMPLEX- CONNECTORS AND 5 POLISHING SETS
Contactor,IEC,Sirius,Standard 3 Pole,Non-Reversing 200 - 277 AC/DC Coil Frame Size S12,500A Panel Mount 2 NO <(>&<)> 2 NC Auxiliaries No Suppression Lugs (Not Included) Terminals UL File E31519 in Vol.11 Sec. 4
Contactor,IEC,Sirius,Standard 3 Pole,Non-Reversing 200 - 277 AC/DC Coil Frame Size S12,500A Panel Mount 2 NO <(>&<)> 2 NC Auxiliaries No Suppression Lugs (Not Included) Terminals UL File E31519 in Vol.11 Sec. 4
Zone 2/Class I, Div 2 Mounting, DC Power Supply, Intrinsically Safe
Zone 2/Class I, Div 2 Mounting, DC Power Supply, Intrinsically Safe
Kinetix 5700 Shunt Resistor 400W
Kinetix 5700 Shunt Resistor 400W
Touch panel with 17.8 cm/7" TFT-display (analog resistive (polyester)), 800 x 480 pixel(s) (WVGA), 262144 colors, Arm® Cortex®-A8, 800 MHz, 2x USB host 2.0, 1 x Ethernet (10/100 Mbps), RJ45, Windows® Embedded Compact 7 and user software: Visu+ / AX OPC Server. (bus system: without)
Touch panel with 17.8 cm/7" TFT-display (analog resistive (polyester)), 800 x 480 pixel(s) (WVGA), 262144 colors, Arm® Cortex®-A8, 800 MHz, 2x USB host 2.0, 1 x Ethernet (10/100 Mbps), RJ45, Windows® Embedded Compact 7 and user software: Visu+ / AX OPC Server. (bus system: without)