Elettronica e PCB

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 2HP at 200 to 208VAC, 2HP at 240VAC, 5HP at 480VAC and 7.5HP at 600VAC three phase. Contactor is also rated for 0.33HP at 115VAC and 1HP at 240VAC single phase. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor is a versatile component that can be used to create motor starters for various applications. It is available in 13 contactor ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 25A inductive 3 pole IEC contactor can be mounted on DIN rail or directly on a panel. It is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC, and 20HP at 600VAC three phase. For single phase applications, it is rated for 2HP at 115VAC and 3HP at 240VAC. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, it can have a SCCR up to 100kA. The contactor is supplied with a 415 VAC 50/60 Hz coil and has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. The contactor is 3.35 inches tall, 1.77 inches wide, and 3.62 inches deep, weighing 0.82 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D Green contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Equipped with an electronic coil, wide band voltage 48-130V, AC/DC compatible, low consumption. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.95 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 115 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactors are designed with seamless integration into control systems in mind, making them ideal for creating motor starters for diverse applications.These contactors come in 13 different ratings suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. The 25A inductive, 3 pole IEC contactor can be mounted on DIN rail or directly on a panel.The contactors are available with both Horsepower and Kw motor ratings for international acceptance. They are rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. For single phase applications, they are rated for 2HP at 115VAC and 3HP at 240VAC.When used with a 480VAC up to 60A circuit breaker, the contactor can handle SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, it can handle SCCR up to 100kA.The contactor comes with a 440 VAC 50/60 Hz coil and has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified.Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications.The contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, weighing 0.82 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the requirements of RoHS/REACh, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor series offers a perfect solution for motor starters across diverse industries. These contactors come in 13 ratings, accommodating inductive loads up to 150 full-load amps and resistive loads up to 200 amps. This specific model is an IEC contactor with a non-reversing design, rated at 9A for inductive loads and 3 poles.This contactor can be mounted on DIN rail or directly onto panels. It boasts both horsepower and Kw motor ratings for global acceptance. The contactor is suitable for various voltage ranges, including 2HP at 200-208VAC, 2HP at 240VAC, 5HP at 480VAC, and 7.5HP at 600VAC for three-phase applications. It also supports single-phase loads with ratings of 0.33HP at 115VAC and 1HP at 240VAC.The contactor is equipped with a 24VDC coil featuring a transient suppressor module. It includes one normally open (NO) and one normally closed (NC) auxiliary contact as standard. The NC contact is mirror certified. Load and auxiliary connections are facilitated by spring terminals.The contactor measures 3.15 inches in height, 1.77 inches in width, and 3.74 inches in depth, weighing 1.06 lbs. It adheres to UL, CSA, IEC, CCC, EAC, and Marine standards, as well as RoHS/REACh regulations, making it a Green Premium product.

The TeSys D contactor series is engineered to provide perfect compatibility with diverse control systems. These contactors can be utilized in motor starters across a wide range of applications.TeSys D contactors are available in 13 different ratings, catering to inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps. This specific 9A inductive, 3 pole IEC contactor is designed for mounting on DIN rail or directly onto a panel.This contactor boasts both Horsepower and Kw motor ratings, ensuring international acceptance. It is rated for 2HP at 200 to 208VAC, 2HP at 240VAC, 5HP at 480VAC, and 7.5HP at 600VAC in three-phase applications. For single-phase loads, it is rated for 0.33HP at 115VAC and 1HP at 240VAC.The contactor comes with a 220 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard features. The NC contact is mirror certified. Load and auxiliary connections are facilitated through ring-lug screw terminals.A comprehensive range of accessories allows for easy adaptation to most applications. The contactor measures 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth, weighing approximately 0.71 lbs.The contactor is certified under UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the RoHS/REACh requirements, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Pressure wire connectors are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Pressure wire connectors are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor series is engineered to provide optimal performance in control system integration. These contactors cater to a wide range of applications, from motor starters to resistive loads. Available in 13 different ratings, these contactors can handle up to 150 full-load amps for inductive motors and up to 200 amps for resistive loads.The 9A inductive, 3 pole IEC contactor is designed for easy mounting on DIN rail or directly onto a panel. It offers both Horsepower and Kw motor ratings for international acceptance. This particular model is rated for 2HP at 200-208VAC, 2HP at 240VAC, 5HP at 480VAC, and 7.5HP at 600VAC in three-phase applications. It also supports 0.33HP at 115VAC and 1HP at 240VAC in single-phase applications.The contactor comes with a 110 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. Load and auxiliary connections are facilitated through ring-lug screw terminals. A comprehensive range of accessories ensures that the contactor can meet most application requirements.The contactor measures 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth, weighing 0.71 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the RoHS/REACh requirements, making it a Green Premium product.

The VW3A7703 industrial automation product from Schneider Electric is a highly reliable and efficient solution for controlling and monitoring industrial processes. This component is designed to work seamlessly with Schneider Electric's variable speed drives, providing users with a comprehensive and intuitive interface for managing their equipment. With advanced diagnostic capabilities, the VW3A7703 can quickly identify and troubleshoot issues, minimizing downtime and maximizing productivity. Additionally, this product is built to withstand even the harshest industrial environments, ensuring reliable performance in any application. Whether you're looking to optimize your production line or improve the efficiency of your equipment, the VW3A7703 from Schneider Electric is the ideal solution for your automation needs.

>TRASFORMATORE DI ISOLAMENTO DI SICUREZZATRASFORMATORE DI CIRCUITO DI CONTROLLO< BINARI; EN 61558-2-2, -2-6 INSTALLAZIONE: VITI/MONTAGGIO CONNESSIONE; TERMINALI: VITE/SCHEDA TA/ISOKL:40 /B; IP00; TIPO DI GR./SCHERMO AVVOLG.:II0 /0; F(HZ):50...60; VETTORE USEC(V):24; ISEC(A):4,17; 440-415-400-380-230-208; UPRI(V):550-525-500-480-460- PN/PN(S6)(KVA):0,1 /0,31; TRASFORMATORE SITAS; FASI:1;

The SIMATIC RF200 Reader RF220R is a robust device designed for reliable and efficient wireless communication. Equipped with an RS422 interface (model 3964R), this reader offers enhanced data transmission capabilities while maintaining a high level of durability, with an IP67 rating and a temperature range of -25 to +70 °C.The device features a compact design with dimensions of M30 x 71mm, making it suitable for various industrial applications. The integrated antenna ensures optimal signal strength and coverage, enhancing the overall performance of the reader.

The Siemens SINAMICS BRAKING RESISTOR is designed for high-power braking applications. It offers a resistance of 75 Ohms and a rated power of 375W. The resistor is capable of handling a maximum power of 7500W/12s/5% duty STANDALONE, making it suitable for heavy-duty applications.This resistor is designed to operate in standalone mode, providing flexibility and ease of integration into various systems. It is a reliable component that ensures efficient braking performance while maintaining safety standards.

The Commutating Choke for Converters is a specialized component that plays a crucial role in power conversion systems. It is designed to handle three-phase operations, operating at an input voltage of 400 volts and a maximum current of 1 ampere.This choke is equipped with a robust design, ensuring reliable performance under varying conditions. Its maximum input voltage is 400 volts, while the maximum current it can handle is 1 ampere. It operates at a frequency of 50 Hz and has an inductance of 14.4 millihenries.The choke also features a temperature rise of 4% and a loss of 1.4 millihenries, making it suitable for applications where heat dissipation is critical. It adheres to the EN 61558-2-20 standard and comes with screw connection terminals.