Elettronica e PCB

The DC Control Relay is a versatile component designed for reliable and efficient control in various applications. It operates at 24V DC, making it suitable for diverse power supply conditions. This relay features 7 normally open (NO) and 3 normally closed (NC) contacts, providing ample flexibility to accommodate a wide range of control requirements. The relay is equipped with 1U screw terminals, ensuring easy installation and maintenance. Its robust construction aligns with the stringent standards set by EN 50011, guaranteeing high performance and reliability.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors are engineered for seamless integration into control systems. They are versatile, suitable for creating motor starters across a wide range of applications. TeSys D contactors come in 13 contactor ratings, catering to inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps. This particular IEC contactor is a 4 pole unit with two normally open (NO) and two normally closed (NC) power contacts. It boasts a 40A resistive load rating, making it ideal for resistive loads. The contactor comes equipped with a 240VAC 50/60 Hz coil, ensuring reliable operation. The contactor also features an integrated auxiliary contact, both NO and NC types. The NC contact is mirror certified for added reliability. Terminals are screw clamp type, facilitating easy connection of load and auxiliary components. With its compact dimensions of 4.13 inches in height, 1.77 inches in width, and 3.90 inches in depth, this contactor is suitable for DIN rail or panel mounting. It weighs 0.94 lbs, making it a lightweight yet robust solution. Certified to UL, CSA, IEC, CCC, EAC, and Marine standards, this contactor meets the highest safety and performance benchmarks. Its compliance with RoHS/REACh regulations further solidifies its status as a Green Premium product.

The TeSys Deca control relay is a versatile solution with 5 contacts, comprising 3 normally open (NO) and 2 normally closed (NC) connections. This relay can handle up to 10A at a maximum voltage of 690V, making it suitable for controlling electromagnetic loads in AC-15/DC-13 applications.The TeSys D control relay is equipped with a 115V 50/60Hz AC control circuit, which can be connected via screw clamp terminals. It's designed to operate reliably at high rates, up to 180 cycles per minute, and in a wide temperature range of -40°C to +60°C.This compact relay measures just 45mm in width, allowing it to be easily mounted on a 35mm DIN rail or fixed using screws. It's certified to multiple international standards (IEC, UL, CSA, CCC, EAC, Marine), and is also a Green Premium product, complying with RoHS/REACh regulations.

Load disconnector 3LD3, Iu 32 AMain switch 3-pole Ratedoperating capacity for AC-23 Aat 400V 11.5kW floor mountingBasic switch with door couplingCentral hole mounting 22.5mmRotating drive black 66 x 66 mm

TeSys Giga high power contactor, 4 poles (4 NO) for category AC-1 applications up to 305A @440V. It provides a 100-250V AC/DC wide band low consumption electronic coil and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 255mm x 143mm x 175mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.

The Siemens 4P R/Y Rotary Switch Disconnector is designed for emergency switching-off applications, offering a robust and reliable solution for controlling power in high-demand environments. This switch disconnector is rated at an operating power of AC-23A at 400V, with a maximum capacity of 9.5 kW.The switch features a 4-pole design, providing enhanced safety and control over the electrical circuit. It is equipped with a red/yellow rotary operating mechanism for easy operation and identification. The switch disconnector is floor mountable and comes with door coupling, ensuring secure installation.The Siemens 4P R/Y Rotary Switch Disconnector is designed to meet the highest standards of safety and reliability in industrial applications. Its robust construction and advanced features make it an ideal choice for emergency switching-off in high-power environments.

D-SUB connector, 9-pos. female connector, two 35° cable entries to one terminal block row, bus system: CAN, CANopen®, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7; screw connection terminal blocks

LC2D40AEHE is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 40A AC-3 18.5kW@400V, it includes a 48-130V AC/DC low consumption electronic coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D40AEHE is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 18.5kW@400V. It includes a 48-130V AC/DC low consumption electronic coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 119mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with an electronic coil, wide band voltage 48-130V, AC/DC compatible, low consumption. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 1.6 million cycles at 40A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Power connections by EverLink BTR screw terminals providing constant tightening pressure.

This CCA 2.5mm² Black PCB Header is designed for high-current applications, offering a nominal cross-sectional area of 2.5 mm². The header is black in color and is rated for a nominal current of 12 A with a voltage rating of 320 V (III/2).The contact surface is made of Tin, ensuring reliable electrical connections. The type of connector is male, and it has 17 potentials arranged in a single row, resulting in 17 positions and 17 connections.This PCB header falls under the CCA 2.5/..-G product range, with a pitch of 5.08 mm. It is designed for THR soldering and features linear pinning with solder pins measuring 2.6 mm in length. Each potential has one solder pin.The header is compatible with the COMBICON MSTB 2.5 plug-in system and follows a standard pin connector pattern alignment. It does not have locking or mounting features and is packaged in cardboard.

TeSys K contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3 (4kW@400V). It provides a low consumption 24V DC coil with transient suppressor module, 1NC built-in auxiliary contact, connection by spring terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

TeSys K control relay, 4 contacts (2NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 110V DC control circuit with no inrush consumption, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

The AF460-30-11-70 is a 3 pole - 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 250 kW / 400 V AC (AC-3) or 400 hp / 480 V UL and switching power circuits up to 700 A (AC-1) or 650 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The AF40-40-00-13 is a 4 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 18.5 kW / 400 V AC (AC-3) and switching power circuits up to 70 A (AC-1) or 60 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

Introducing the AC3 power contactor from Siemens. This robust device is designed for high-power applications, with a capacity of 65A and a voltage rating of up to 400V. The contactor features a size S2 design, which allows for easy installation and maintenance. It comes equipped with screw terminals for secure connection and an auxiliary switch that is permanently mounted.The AC3 contactor is also designed to handle both AC and DC voltage ranges from 20-33V. This makes it a versatile choice for a wide range of applications, including industrial automation and control systems.To ensure reliable operation, the contactor includes a varistor for protection against voltage surges. It is also designed with a 3-pole configuration to provide optimal performance and safety.

The TeSys Deca Nonreversing Contact is a versatile solution for controlling electrical loads in industrial and commercial settings. This 9A, 5HP at 480VAC contactor is designed to handle high power demands with ease, providing reliable performance even under demanding conditions. The contactor is equipped with a robust design that allows it to be mounted on DIN rail or directly onto a panel. It features a coil voltage of 80VAC at 50/60Hz, ensuring compatibility with a wide range of power supplies. The contactor also includes two auxiliary contacts: one normally open (NO) and one normally closed (NC), providing additional control options for your system. The TeSys Deca Nonreversing Contact is rated for up to 100kA SCCR, making it suitable for applications with high short-circuit current requirements. It is also certified to various international standards, including UL, CSA, IEC, CCC, EAC, and Marine, ensuring its reliability and safety in diverse environments. With a height of 3.15 inches, width of 1.77 inches, and depth of 3.39 inches, this contactor is compact yet robust, making it suitable for installation in various settings. It weighs just 0.71 lbs, further enhancing its ease of use.

LC2D09BD is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 24V DC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D09BD is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 4kW@400V. It includes a 24V DC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 24V DC coil for easy integration to all control systems. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 2 million cycles at 9A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connection by screw clamp terminals.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 60A resistive load rating. Contactor is supplied with a 120 VAC 60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 4.92 inches deep. It weighs 3.17 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AC-3 Power Contactor is designed to handle high capacities, providing 12A and 5.5kW/400V with a 3-pole configuration. It features a spring-type terminal removable auxiliary switch for ease of use and maintenance. This contactor is ideal for DC 24V applications, offering 2NO+2NC connections that ensure reliable operation in various industrial environments.