Ricerca prodotti

SIMATIC S7-400H, 417-5H SYSTEM-BUNDLE H-SYSTEM WITH 1 X UR2-H, W/O MEMORY CARD, 2 X PS 405 10A, DC 24/48/60V, 4 X SYNC-MODULE 10M, 2 X SYNC-CABLE 1M, 2 X CPU 417-5H, 4 X BACK-UP BATTERIES

As-interface flat mod., 4i/4o, with screw connection, 4 x 1 input, pnp 4 x outputs 45ma, 24V DC supply for the outputs via as-i cable

SIMATIC ET 200SP, 10 COLOR IDENTIFICATION LABELS COLOR CODE CC85, FOR 2 AUX TERMINALS, FOR BU-TYPE C0, WITH PUSH-IN TERMINALS

SIMATIC et 200sp, 1000 labeling stripes, yellow, 10 sheets din a4, perforated, paper, 280g/m2

This memory card is proposed as an option available for Modicon M221 and M221 Book logic controllers. It s used for backing up and transferring applications, loading firmware, data logging. It is also used for duplicating applications between controllers. It has 256 MB capacity.

This power module is part of the Modicon X80 modules. This module provides the power supply for each Modicon X80 I/O rack and the modules installed. It is supplied with 24V to 48V DC isolated. It has a case which provides IP 20 protection of the electronics.

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This safety DC discrete input module provides 20 discrete inputs with sink discrete input logic, 24V DC, sink. There is an isolation between channel and bus at 500V AC. This safety module, associated with TM5CSLC safety logic controller provides distributed safety solutions on Sercos bus up to SIL 3, Cat. 4, PL e, SIL CL3. It features 2 LEDs for power supply, 2 LEDs for safety status and 20 LEDs for input status signaling. It is furnished with 2 wires for electrical connection. Its housing colour is red. It weighs 0.059kg. It measure 75mm deep, 25mm wide, 99mm high. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. It is compatible with Modicon TM5CSLC safety logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

SIMATIC dp, y connector for distributed i/o et 200 for the double wiring of i/o with one cable to et 200 5-pin m12

This TM3 safety expansion module monitors emergency shutdown pushbuttons and limit switches to conform to PLd / Category 3. It meets the requirements of PL d/Category 3 conforming to EN/ISO 13849-1 and SILCL 2 conforming to EN/IEC 62061. It has a module locking latch, 2 TM3 bus connectors designed to provide continuity of the link between connected modules, a symmetrical rail locking clip, display block for the module channels and diagnostics. It completes your Modicon M221, M241 or M251 PLC configuration with a dedicated safety I/O, without the need to use a complete safety controller. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has spring terminals for fast and reliable wiring of safety circuits.

Round cable set; connection 1: IDC/FLK socket strip (1x 26-position); connection 2: IDC/FLK socket strip (1x 26-position); cable length: 2 m

Round cable set; connection 1: IDC/FLK socket strip (1x 34-position); connection 2: IDC/FLK socket strip (1x 34-position); cable length: 1.5 m

Axioline F, Analog input module, Analog inputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, connection technology: 2-, 3-, 4-conductor, transmission speed in the local bus: 100 Mbps, integrated sensor supply, Extreme conditions version, degree of protection: IP20, including bus base module and Axioline F connectors

Round cable set; connection 1: IDC/FLK socket strip (1x 34-position); connection 2: IDC/FLK socket strip (1x 34-position); cable length: 6 m

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This cordset is an accessory of I/O module. The length of this cable is 5m. This product is robust, high quality and based on the latest innovative technology. It is furnished with 40-way connector and two HE10 connectors for electrical connection. It weighs 1.53kg. It is suitable for medium to large process applications. This cordset is compatible with Telefast Advantys ABE7 sub-bases and I/O module with 40-way connectors. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

SIMATIC ET 200SP. Analog input module. AI 4xTC High Speed. suitable for BU type A0. A1. Color code CC00. channel diagnostics. 16 bit. +/-0.1%

SIMATIC S7. S7 SCL V5.7 Floating License for 1 user. E-SW. software and documentation on CD. license key on USB flash drive. class A. 5 languages (de.en.fr.es.it). from STEP 7 V5.7. executable in Windows Server 2016. Windows Server 2019. Windows 10 Professional. Windows 10 Enterprise reference hardware: S7-300/400. C7 content: set (1x CD + 1x USB)

SIMATIC NET,IE CONNECTING CABLE M12-180/M12-180, PREASSEMBLED IE FC TRAILING CABLE GP, WITH 2 M12 CONNECTORS (D-CODED) LENGTH 15.0 M