Ricerca prodotti

Thalassa PLS box polyester rear with opaque polyester cover. 360 x 540 x 180 mm. Insulating modular box. One piece moulded body. Wall mounted. Low plain cover, cover locking screw removable. Polyester reinforced with fibreglass rear and cover. Grey RAL 7035. IP65, IK09, NEMA (13,4X) 960°C fire resistance. Insulation Class II.

Communication Adapter, RS485 To EtherNet, IP, Single Or Multi, Drive Modes, 10 OR 100 mbps Full, Half Duplex Operation, Use With PowerflexDrive PF4M-4-40-40P, 400, Single Node, Internal Mount

ADAPTER SET FOR VESA 75 FOR FULLY ENCLOSED HMI UNITS 1 ADAPTER PLATE AND 8 SCREWS

TeSys GV electrical trip, MN undervoltage release, 220-240V AC 50Hz, for motor circuit breakers GV2, GV3. It trips the circuit breaker when the control voltage drops below 0.35 Uc, possible opening between 0.35-0.7 Uc. Closing of the circuit breaker is only possible when the control voltage is applied in the range 0.85-1.1 Uc. To be mounted on right-hand side of the circuit breaker, connection by screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

Spacial S3D wall mounted steel enclosure with plain door. 800 x 1000 x 300 mm. Single piece body, mounting plate and 2 cable gland plate included. 3-point closure system with handle and 3 mm double bar lock insert. Steel made, epoxy-polyester powder finish. Protection IP 66, IK10, Grey RAL 7035.

VZ16 is an add-on earthing module for TeSys Vario switch-disconnector from Schneider Electric. Rated 125A to 175A 690V, to be used with V5 and V6 switch bodies. Available worldwide, multi-standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 10Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP23. It weighs 67kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.

This Altivar Ethernet TCP/IP communication module has 2 ports with RJ45 connectors. It is compatible with Altivar Machine ATV320, Lexium 32 and Altivar 32. Removable module allows last minute decisions on drive communication protocol and thus facilitates installation project management.

Screw bit, PZ crosshead, E6.3-1/4" drive, size: PZ 2 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173

Battery Powered Installation tool for use with the following stainless steel cross section ties: Type MLT and MLTFC: Heavy, extra-heavy, and super-heavy Type MLTC: Heavy Type MLTDH: Extra-Heavy and super-heavy Used with custom length banding cross sections: Type MB and MBC: Heavy, extra-heavy, and super-heavy2 – 12 volt Lithium-Ion batteries and 220 volt, 50 Hz charger included.

Installation kit for CF 1000-1,5 up to serial number 16059, for insulated ferrules in accordance with DIN 46228-4: 2017-05, cross section range: 2.5 mm², stripping length: 8 mm,

Active QUINT redundancy module for DIN rail mounting with ACB (Auto Current Balancing) Technology and monitoring functions, input: 24 V DC/2x 40 A, output: 24 V DC/1 x 80 A, including mounted UTA 107/30 universal DIN rail adapter

Kit, Powerflex 20 Class HIM Bezel, IP20, UL-NEMA Type 1, Includes 1202-C30 3 m Cable, Cabinet Door Mount, Use With LCD HIMs And WirelessModule

This terminal is an accessory of soft start/soft stop Altistart 22 range. It enables the human machine interface of the Altistart 22 soft start/soft stop unit to be positioned remotely on the door of an enclosure. Its protection index is IP54. It weighs 250g and its dimensions are, 50mm wide, 70mm high, 15mm deep. It is used to set and configure the soft start/soft stop unit remotely and display the soft start/soft stop unit status and detected errors remotely. A remote-mounting cordset VW3A1104Rxx is also required, to be ordered separately.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The ProfNet fieldbus module is communication accessory of servo drives. It supports 100Mbits 100m transmission rate, 256 number of addresses with ProfNet communication port protocol. It is furnished with 2 RJ45 connectors for electrical connection. It weighs 0.45kg. This product is compatible with Lexium 32M servo drive. Lexium 32 is a servo drive range with three or four servo drive models and two servo motor families plus an intelligent selection of options. Servo drives and servo motors from 0.15kW to 7kW for maximum performance.

IE M12 PANEL FEEDTHROUGH, CONTROL CABINET BUSHING F. TRANSITION OF M12(D-CODED) CONNECT. TECHNIQUE (IP65) ON RJ45 CONNECT. TECHNIQUE (IP20) 1 PACKAGE = 5 PIECE

Accessories, Fuse holder, Rated cross-section: Plug-in connection, Wemid, dark beige, Operating instructions/catalogue

Profile cutter, for cutting and stamping holes in standard DIN rails, NS 32/NS 35/7,5/NS 35/15 and for cutting the NS 15 and NLS‚ÄëCU 3/10 neutral busbar to length, can accommodate 2 stamping bits, with metric measuring rail, delivered without stamping bits