Inverter e convertitori di frequenza

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.

The motion servo drive is part of the Lexium 28 series, specifically designed to control servo motors. This product operates under a voltage range of 200V to 240V and features an output power of 4.5kW. It is equipped with a PTI/PTO interface that includes 6 digital inputs and 3 digital outputs, alongside a CANopen/CANmotion fieldbus interface for communication. With a nominal rotation speed ranging from 1500rpm to 2000rpm, this drive also contains a pulse-train input/output interface, a single digital input, position sequence mode, and an analog input for speed and torque control. The safety function STO (Safe Torque Off) ensures operational safety. The drive's physical dimensions are 116mm in width, 234mm in height, and 186mm in depth, with a weight of 3.2kg. It is designed for vertical installation within control cabinets to facilitate proper cooling within a temperature range of 0°C to 55°C. The servo drive is compatible with BCH2 servo motors rated at 3.5kW and 4.5kW. It is certified by CE, CULus, and CSA, ensuring compliance with applicable safety and performance standards.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 6A at 8kHz and a continuous power of 1500W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus and SERCOS III integrated communication interfaces. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 2.1kg. This product is certified by CE and CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

This Lexium 32 servo drive works at a rated supply voltage from 208V ac to 480V ac. It can feed 3-phase synchronous motors BMH or BSH, its continuous output current is 3A at 8kHz. The compact size of the servo drive and associated servo motor provides maximum power in the minimum space. This servo drive is specifically designed for industrial machines. It offers high performance, power and simplicity of use in motion control applications. It complies with international standards IEC/EN 61800-5-1, IEC/EN 61800-3, and is UL and CSA and is UL and CSA certified and CE marked. It has been developed to meet the requirements of directives regarding protection of the environment (RoHS).

This Lexium 32 servo drive works at a rated supply voltage from 208Vac to 480Vac. It can feed 3-phase synchronous motors BMH or BSH, its continuous output current is 6A at 8kHz. The compact size of the servo drive and associated servo motor provides maximum power in the minimum space. This servo drive is specifically designed for industrial machines. It offers high performance, power and simplicity of use in motion control applications. It complies with international standards IEC/EN 61800-5-1, IEC/EN 61800-3, and is UL and CSA certified and CE marked. It has been developed to meet the requirements of directives regarding protection of the environment (RoHS).

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 safety, 6 logic discrete inputs and 5 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 6A at 8kHz and a continuous power of 1600W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. It is an IP20 rated product. Its dimensions are 48mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 3A at 8kHz and a continuous power of 900W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 1.5A at 8kHz and a continuous power of 800W at 400V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

This product is part of the Lexium 32i range, an offer integrated servo drive from 0.6kW to 2.2kW. This control unit provides 2 safety discrete inputs, 4 logic discrete inputs and 2 positive or negative logic outputs. It is easy to integrate and maintain. It is furnished with M12 connectors for CANmotion, M12 for CANopen, RJ45 for Modbus. It is a control unit with a discrete input voltage of 24V DC and a discrete output voltage of 30V DC. Signals are controlled by servo motor encoder feedback. It is an IP65 rated product. It weighs 0.636kg. It is suitable for applications involving high-precision, dynamic positioning such as material handling, material working, packaging and printing. This product is certified by CE, TUV, CSA, RoHS and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. With servo motor and servo drive integrated in one housing, the Lexium 32i is designed for application areas requiring high precision and advanced motor control.

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This is a bus coupler designed for creating distributed IO islands on CANopen fieldbus, exchanging data between controller and distributed IO. Its access method is based on CSMA-MA, multi-master protocol. This is a bus coupler module designed for creating distributed IO islands on the Canopen fieldbus. This bus coupler works with an electronic power distribution module, a bus base and a terminal block. It has a 9-way SUB-D connector ISO 11898, with a 10 to 1000 Kbps data transmission rate. It weighs 0.080kg. It measures 25mm wide, 99mm high, 75mm deep. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. It is compatible with Modicon M258 logic controllers, Modicon LMC058/LMC078 motion controllers. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

The Modicon M262 Logic Controller is a robust solution designed to handle the demands of performance-oriented machines. This controller integrates logic, motion, and safety control applications, offering IIoT readiness. The TM262L20MESE8T model is specifically tailored for 4 fast digital inputs and 4 fast digital outputs, providing independent axis control via EtherNet/IP. It supports two Ethernet-based networks (EtherNet/IP, Modbus/TCP) and one serial port for various protocols like Modbus, ASCII, and Machine Expert.The Modicon M262 is equipped with cybersecurity capabilities, supporting monitoring, analytics, and predictive maintenance. It operates on a non-isolated 24V DC power supply, features built-in overload protection, and houses a dual-core processor for high performance at 5ns/instruction. This controller offers one communication bus (Ethernet, CANopen), one IO bus, and one IO port.Measuring 125mm in width, 90mm in depth, and 100mm in height, the Modicon M262 weighs 0.665kg. It is designed for machinery requiring integrated IIoT connectivity or encrypted communication. Certified with CE, cULus HazLoc, RCM, EAC, Achilles L2, EU RO Mutual, Conform to UL 61010-1/-2-201, CSAC22.2 No. 61010-1/-2-201, ANSI/ISA 12-12-01, EN 61131-2.The Modicon M262 is compatible with the TMS CANopen smart communication module and Modicon TM3 IO expansion modules. It can be configured using EcoStruxure Machine Expert. This controller installs on a 35mm DIN rail with Clip-on locks, making it an ideal choice for performance machines.

The Lenze EVF8202-E is a top-of-the-line variable frequency drive (VFD), meticulously crafted for the demands of industrial automation. This compact and adaptable drive delivers dependable motor control, equipped with an array of advanced features such as integrated safety functions, versatile communication options, and built-in energy efficiency modes.With a power range spanning from 0.25 to 22 kW, the EVF8202-E is suitable for a diverse spectrum of applications, catering to everything from basic conveyors to intricate production machinery. Its user-friendly, menu-driven interface and extensive parameter settings make installation and commissioning straightforward.The drive also boasts an array of advanced control functions, including torque control, speed control, and position control, making it ideal for applications that require precise control and high performance. Furthermore, the EVF8202-E is equipped with a range of built-in safety features, such as Safe Torque Off (STO) and Safe Stop 1 (SS1), which safeguard both operators and equipment.In summary, the Lenze EVF8202-E stands out as an exceptional choice for industrial automation applications that necessitate reliable, high-performance motor control in a compact and versatile package.

The ACS550-01-038A-4, produced by ABB, is a robust industrial automation product that offers seamless motor control across diverse environments. This variable frequency drive (VFD) operates on a 380-480V AC input voltage and boasts a power rating of 30 HP.Its compact design makes it suitable for use in a wide range of settings, including demanding industrial conditions. The ACS550-01-038A-4 is equipped with advanced control algorithms that enable smooth operation of motors at varying speeds and torque levels, resulting in enhanced energy efficiency and reduced wear on equipment.Safety is a top priority with this VFD, which comes with built-in safety features such as overload protection, short circuit protection, and overvoltage protection. Its user-friendly interface and easy-to-use software make it an ideal choice for both beginners and experienced users.

This product is part of the Modicon M580 range, an offer of Programmable Automation Controllers (PAC) and safety Programmable Logic Controllers (PLC) with built-in Ethernet. This processor module offers a maximum of 8 rack configuration and 180 application specific channels. It is a processor module with a current consumption of 295mA at 24V DC. It supports 5120 discrete, 1280 analogue local I/O channels and 64 distributed equipment. It is integrated with Ethernet TCP/IP for service port, 2 Ethernet TCP/IP for device network, Ethernet for HSBY port and USB type mini B for connections. It offers 600000 hours of MTBF. It has 31 - 2 racks per remote drop for I/O station. It has an integrated RAM of 24MB for program, 4096kb for data, 10kb for system memory and expandable flash of 4GB for data storage. It is an IP20 rated product. It weighs 0.849kg. It is suitable for medium to large process applications. This product is certified by CE, Merchant Navy, UL, RCM, CSA, EAC. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. The benefits of Modicon M580 are reduce time to market, improve reliability and sustainability, improve productivity with high performance and increase operating profitability due to improved access to data.

The Altivar Process ATV900 variable speed drive is engineered for controlling 3-phase motors in industrial applications. It supports a wide rated supply voltage range of 380 to 480 Vac and is capable of handling continuous output currents of 173 A for normal duty operations and 145 A for heavy duty tasks. Integrated communication protocols such as Modbus TCP and EtherNet/IP facilitate seamless integration into automation systems, while the device supports various option modules for enhanced connectivity. Notably, the ATV950D90N4E variant includes a braking chopper, making it suitable for applications requiring precise control over motor dynamics. Designed for harsh environments, this drive has an IP55 protection rating and operates effectively in ambient conditions ranging from -15°C to 50°C. Its built-in safety features include Safe Torque Off (STO) and Safe Stop 1 (SS1), ensuring high operational reliability. The device's compact dimensions, measuring 345 mm in width, 1250 mm in height, and 436 mm in depth, make it suitable for wall mounting in various industrial settings.

The Variable Speed Drive ATV950D30N4E is capable of powering 3-phase synchronous and asynchronous motors, accommodating a power rating of up to 30 kW for standard applications, and up to 22 kW for heavy-duty applications requiring significant overload. This unit operates within a supply voltage range of 380 V to 480 V and is engineered for industrial process applications, including sectors such as oil and gas, mining, and food and beverage.With a continuous output current rating of 61.5 A at 4 kHz for normal duty and 46.3 A for heavy duty, it ensures high motor performance and precise control in master/slave configurations. The integrated web server and data logging capabilities facilitate quick troubleshooting and maintenance, reducing downtime. Additionally, advanced connectivity options such as EtherNet/IP and Modbus TCP promote seamless integration within automation frameworks.This drive features a robust protection rating of IP55 and complies with various international standards, ensuring reliability in demanding environments. The ATV900 series variable speed drive includes an array of communication modules and options for customization, making it suitable for diverse industrial applications.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 8000RPM, smooth shaft and holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMH servo motor is medium inertia motor, it is particularly suitable for high-load applications and allows the movement to be adjusted in a more robust manner. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 3.91A and a continuous power of 1.68W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP54 rated product. Its dimensions are 225mm (Length) x 70mm (Width), centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 82mm circle diameter of the mounting hole. It weighs 4kg. This product is compatible with Lexium 32 servo drives. It supports international standard 70mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BMH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.

This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end without holding brake. It is an equipped with a multi-turn SinCos Hiperface® feedback with 32,768 points/turn x 4096 turns speed feedback resolution. It is a servo motor with a rated supply voltage of 480V, a continuous stall current of 1.78A and a continuous power of 1.05W. The shaft dimensions are 11mm (diameter) x 23mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 rated product. The length of this product is 122mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 1.6kg. This range is compatible with Lexium 32 servo drives. This product is compatible with LXM32.U60N4 at 400V to 480V three phase and LXM32.D12N4 at 400V to 480V three phase. It supports 70mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

The Encoder Interface Card for Altivar is a versatile solution that supports both Flux Vector Control operation with sensor for asynchronous motors and Vector Control operation with speed feedback for synchronous motors. This card is designed to improve drive performance, regardless of the motor load state. It is compatible with push-pull outputs encoder technology and is simple to install and remove. It is inserted into a dedicated slot of the variable speed drive and is protected against encoder supply short circuits and overloads.This card is specifically designed for Altivar 61 and Altivar 71, making it a reliable choice for various industrial applications. Its robust design ensures durability and long-term performance. The card's compatibility with push-pull outputs encoder technology makes it an ideal solution for systems that require precise control over motor speed and direction.

L'inverter Siemens MICROMASTER 440 (modello 6SE6440-2UD21-5AA1) è progettato per applicazioni di controllo motori impegnative. Questo inverter ad alte prestazioni offre un controllo preciso e robuste capacità di sovraccarico, che lo rendono ideale per un'ampia gamma di applicazioni industriali. Con una potenza nominale di 1,50 kW (2,00 CV) e una tensione nominale di 480 V, garantisce un funzionamento efficiente e affidabile.L'inverter supporta l'ingresso e l'uscita CA trifase, con un intervallo di tensione di linea da 380 a 480 V ±10% e una frequenza di linea da 47 a 63 Hz. È dotato di un'elevata capacità di sovraccarico, che consente una corrente di uscita del 150% per 60 secondi, seguita da una corrente di uscita del 100% per 240 secondi in un tempo di ciclo di 300 secondi. Il dispositivo funziona in modo efficiente con un fattore di potenza di 0,95 e un'efficienza di 0,96.Progettato per la versatilità, il MICROMASTER 440 include sei ingressi digitali standard, tre uscite a relè, due ingressi analogici e due uscite analogiche. Dispone inoltre di un'interfaccia PTC/KTY per funzionalità avanzate. L'inverter è costruito per resistere ad ambienti difficili, con un intervallo di temperatura ambiente di funzionamento da -10 a 50 °C e un intervallo di temperatura di stoccaggio/trasporto da -40 a 70 °C.Il design meccanico dell'inverter include un telaio compatto (FSA) con dimensioni di 149,0 mm di altezza, 73,0 mm di larghezza e 173,0 mm di profondità. Ha un peso netto di 1,30 kg e un grado di protezione classificato IP20 / UL di tipo aperto, garantendo prestazioni affidabili in vari ambienti industriali.