Moduli lieneri e attuatori

The SMC VQ1000/2000 Cylinder Port Fitting VVQ1000-51A-C8 is designed for efficient and reliable performance in pneumatic systems. This fitting is part of the VQ1000/2000 series, known for its compact and lightweight design, making it ideal for applications where space is limited. The built-in one-touch fittings allow for quick and easy installation and detachment, reducing downtime and maintenance efforts.This fitting is specifically designed for use with the IRV10 series vacuum regulators, allowing for precise adjustment of vacuum line pressure. The single-sided connections and reduced weight (20% lighter compared to the IRV2000 with IRV20 fitting) enhance the overall efficiency of the system. The fitting also features a clip attachment mechanism, enabling easy attachment and detachment of pressure gauges or digital pressure switches, with the ability to change the mounting direction and angle in 60-degree increments.The VQ1000/2000 series fittings comply with industry standards, ensuring reliable and consistent performance in demanding industrial environments. These fittings are suitable for a wide range of applications, including automation systems, manufacturing processes, and other pneumatic control systems.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The Dual Piston Rods with Slide Bearing in the CXSM Series offer non-rotating accuracy of up to 0.1. These rods are designed to provide lateral stability, protecting them from side load impacts. The slide bearing type ensures smooth operation and longevity.

The MGQM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts. Non-rotating accuracy ranging from +/-0.04 for 100 mm bore to +/-0.08 for 12 mm bore.

The MGQL is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The high precision ball bushing allows for smooth operation that ensures stable travel resistance. Non-rotating accuracy ranging from +/-0.05 for 100 mm bore to +/-0.10 for 12 mm bore.

The MXSL is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. The ports and stroke adjuster positions are located opposite from the standard MXS in a symmetrical or mirror image of each other to minimize clearance for adjacent mounting applications. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5mm, 0-15mm and 0-25mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The legacy MXQ precision slide table is integrated with guides and rails combined with recirculating bearings to isolate the load bearing from the movement of the dual rods and piston seals. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXF low profile precision slide table positions its cross roller bearing linear guide system adjacent to the cylinder to isolate the load bearing from the movement of the piston rod and seals. Dowel pin holes on the bottom surface and body through-holes from the top surface allow for precise and repeatable mounting.

Combining compact cylinder size and rotational capability, the MK2 cylinder is designed for heavy duty clamping applications, with an available integrated arm that swings out of the way when the cylinder is extended. 90deg. clockwise or counter clockwise rotation is available, and clamping arms with adjustment screw are standard options. MK2 is available in 6 bore sizes from 20mm to 63mm and strokes from 10 mm to 50 mm.

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

The CXS Series is a high precision dual piston actuator, boasting an accuracy of 0.1. This series features the CXSL model, which incorporates a ball bushing type for smooth operation and stable travel resistance.The CXSL design ensures non-rotating accuracy, making it ideal for applications requiring precise linear motion. The high precision ball bushing type allows for smooth operation that ensures stable travel resistance, enhancing the overall performance of the actuator.

Series MSZ, a 3-position rotary table, can be adjusted to stop at three different positions within a 190 radius. The MSZ does not require a motor, or any complex machinery to function, only compressed air. Designed initially for the selection and separation of work pieces to either the left or right, the rotary table is controlled via a single, 3-position solenoid valve, ensuring simple setup and operation. This series is currently available in two model types, basic and high accuracy (for higher loads and reduced table deflection). The MSZ can be ordered in four different sizes and is designed to work with an operating pressure range between 0.2 to1 MPa.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The MXSL is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. The ports and stroke adjuster positions are located opposite from the standard MXS in a symmetrical or mirror image of each other to minimize clearance for adjacent mounting applications. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5mm, 0-15mm and 0-25mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGQM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts. Non-rotating accuracy ranging from +/-0.04 for 100 mm bore to +/-0.08 for 12 mm bore.

The MXQ*A is the newest generation of precision slide tables integrated with hardened stainless steel guides and rails to isolate the load bearing from the movement of the dual rods and piston seals. Its recirculating ball bearings are matched by size to each slide table with a slight negative clearance resulting in greater accuracy. The MXQ s thinly formed special stainless steel slide table reduces thickness allowing for a larger guide pitch providing high rigidity. The slide table s reduced weigh also increases allowable kinetic energy. The stoppers and shock absorbers are positioned at the center axis to minimize load deflection. The dowel pin holes positioned on the center axis standardizes mounting conditions for the basic and symmetric styles. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The series CU single rod, double acting, long stroke, free mount cylinder saves space and allows direct and precise mounting. The long stroke version is available with stroke lengths up to 100mm. Options include auto-switch capabilities, free mount choices, recessed switch mounting grooves and rubber bumpers standard.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The MGPM is a compact body actuator that integrates internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals. This design feature enhances stability and protects against side load impacts, making it suitable for stopping applications.The cylinder is equipped with a carbon steel alloy slide bearing that provides lateral stability. The slide bearing is designed to resist side load impacts, ensuring the actuator's performance remains consistent even under heavy loads.