Oleodinamica e pneumatica

Standard double acting, single rod version of the CQ2 compact cylinder. The CQ2 is available in bore sizes from 12mm to 100mm. It comes standard with male or female piston rod threads. It is possible to mount auto switches on any of the 4 surfaces.

The C85 series single rod, double acting, conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.

Series VT 3 port, direct operated poppet valves are compact in size, yet provide large flow capacity, and low power consumption. The series is suitable for use in vacuum applications. The VT valve is a single valve with 6 functions (universal porting type) such as N.C. valve, N.O. valve, divider valve, selector valve, etc. The manifold style valve, series VO, can be easily converted from N.C. (normally closed) to N.O. (normally open) by merely turning over the switch cover.

Standard double acting, single rod version of the CQ2 compact cylinder. The CQ2 is available in bore sizes from 12mm to 100mm. It comes standard with male or female piston rod threads. It is possible to mount auto switches on any of the 4 surfaces.

The MGPM is a compact body actuator featuring internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals. The carbon steel alloy slide bearing provides lateral stability, protecting it from side load impacts, making it suitable for stopping applications.

Series AFM modular style mist separator is available in body sizes 20, 30, and 40, and is offered with Rc, NPT or G thread types. The AFM s standard filtration is 0.3 m with a 99.9% filtered particle size. Body size 30 and 40 now have a transparent bowl guard that offers 360 visibility, while completely protecting the bowl from the environment. The modular design allows connection with other SMC air preparation equipment. Use in combination with the AF series to meet your clean room filtration requirements.

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

SMC s MK-Z has an allowable moment of inertia 3 times higher than the conventional MK and MK2 styles. The overall length is the same as the conventional styles, and mounting dimensions are interchangeable with the MK series. Auto switches can be mounted on any of the 4 surfaces with no projection of the switch.

Standard double acting, single rod version of the CQ2 compact cylinder. The CQ2 is available in bore sizes from 12mm to 100mm. It comes standard with male or female piston rod threads. It is possible to mount auto switches on any of the 4 surfaces.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The C85 series single rod, double acting, conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.

The CQM is a compact cylinder integrated with a guide rod and plate. The series is available in 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100mm bore sizes. Non-rotating accuracy is 0.2 or less. Series CQM allows a workpiece to be mounted directly to the tooling plate. Auto switches are mountable/removable even when the plate is retracted.

This connection sub-base, designated as ABE7, is engineered for distributing power to four thermocouples. It effectively manages isolated sensor power supplies using a converter while providing cold-junction compensation for the thermocouple inputs. The product is equipped with screw-type terminals, allowing for connections with a 25-way SUB-D interface to Programmable Logic Controllers (PLC).Rated IP20, it is suitable for a variety of industrial applications and operates within an ambient temperature range of 0 to 60 °C. The device weighs 0.18 kg and can be mounted using clips on a 35 mm symmetrical DIN rail or via screws with a solid plate fixing kit. It is compatible with Modicon M340 BMXART0414 and BMXART0814 analog input modules.This sub-base meets several certification standards, including GL, CSA, UL, and DNV, ensuring its reliability in various environments. Its design allows for efficient wiring rationalization in automation systems.

This passive connection sub-base, part of the Modicon ABE7 range, accommodates 16 digital output channels, each with two terminals. Operating at a control circuit voltage of 24VDC, it facilitates digital output control functions effectively.The sub-base is equipped with screw terminals for reliable electrical connections and features a 20-way HE10 interface for seamless integration with programmable logic controllers. With a tightening torque requirement of 0.6 N·m using a flat 3.5 mm screwdriver, its installation is straightforward. The device has an IP20 degree of protection and weighs 0.640 kg, making it suitable for various industrial applications where rapid I/O module connection is necessary.Designed for compatibility with Modicon M221 Book, TSX Micro, and Modicon Premium controllers, as well as Modicon TM3 and X80 I/O expansion modules, this sub-base simplifies wiring in automation systems. It includes multiple safety features, such as short-circuit protection with an internal fuse rated at 2 A and a maximum output current of 1.8 A. Furthermore, it is certified by DNV, CSA, UL, GL, and EAC, ensuring compliance with industry standards. The Designation Code for this model is ABE7H16F43.

This passive connection sub-base is a component within the Modicon ABE7 range, specifically engineered for pre-wired system applications. It supports 16 channels, providing one terminal per channel for digital I/O functionality. The operating control circuit voltage is 24 VDC, facilitating efficient communication with connected devices.Electrical connections are established via screw terminals, and the device features a 20-way HE10 connector for interfacing with programmable logic controllers (PLCs). The tightening torque for wiring is specified at 0.6 N·m, utilizing a flat screwdriver with a diameter of 3.5 mm. The sub-base adheres to the IP20 protection class, ensuring moderate environmental resistance, and has a net weight of 0.196 kg.This product is suitable for various industrial applications that require rapid connections between I/O modules—whether digital or analog—and operational components. The sub-base is certified by DNV, CSA, UL, GL, and EAC, underscoring its compliance with industry standards. It is compatible with TSX Micro and Premium PLCs, as well as numerical controllers, and can be mounted using clips on a 35 mm symmetrical DIN rail or secured with screws through a solid plate.In terms of environmental resilience, the sub-base operates within a temperature range of -5 to 60 °C and is designed to withstand a shock resistance of up to 15 g, as per IEC 60068-2-27 standards. Its construction allows for a pollution degree rating of 2, conforming to IEC 60664-1, making it a versatile choice for various automation system setups.

The subject of our discussion today is the PacDrive 3 range's offering in distribution boxes, specifically tailored for Lexium 62 ILM daisy chains. This particular distribution block boasts a unique configuration: 1 input and 4 outputs. It is equipped with a SERCOS III physical interface, operating at a transmission rate of 100Mbit/s.The rated supply voltage for this product spans from 250V to 700V, while the control circuit voltage stands at 24V DC and can handle an input current of up to 20A. This distribution box is not only robust but also weather-resistant, boasting an IP65 rating. Constructed from polycarbonate, it measures 230mm in width, 151.4mm in depth, and 94mm in height, weighing a mere 0.85kg.This distribution box is compatible with Lexium 62 ILM integrated servo modules, which can be controlled using all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. It also supports multiaxis integrated servo drives ranging from 0.31kW to 1.91kW, making it an ideal choice for automation solutions based on PacDrive 3.

The MGQM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts. Non-rotating accuracy ranging from +/-0.04 for 100 mm bore to +/-0.08 for 12 mm bore.

The auxiliary contact block is compatible with contactors LC1D and control relays CAD, providing 2 normally open (NO) and 2 normally closed (NC) contacts. Rated for operational currents up to 10A at 690V AC, it utilizes spring terminals for connection. The device features a compact design with dimensions of 44 mm in width, 42 mm in depth, and 48 mm in height, and has a net weight of 0.05 kg. Its mechanical durability is rated for 30 million cycles, ensuring reliable performance over time.With an operating temperature range from -5 to 60 °C and a storage temperature range of -60 to 80 °C, this block is suitable for various environments, offering an IP20 protection rating as per IEC 60529. Its certifications include compliance with multiple international standards such as IEC, UL, CSA, and others, affirming its reliability and safety standards.This product is classified under the Green Premium category, indicating its compliance with environmental regulations such as RoHS and REACH, and it is designed to be mercury-free and free of toxic heavy metals. The auxiliary contact block, with the designation code LADN, supports instantaneous contact operation with a non-overlap time of 1.5 ms between NC and NO contacts during energization and de-energization.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The AQ series quick exhaust valve offers high flow capacity in a compact and lightweight body. The series is available in lip, diaphragm and an inline body shape with built-in one-touch fittings. The AQ is available in a variety of port sizes.