Oleodinamica e pneumatica

The SYJ Valve is an innovative combination of space efficiency and performance superiority which provides real value to the design solution. Whether designed in a manifold or used as a single valve, this small profile increases design flexibility and minimizes space requirements. The SYJ valve utilizes a low power (0.5 watts standard) pilot solenoid design, which dramatically reduces thermal heat generation. This improves performance, decreases operating costs, and allows for direct control by PLC output relays. All electrical connections for SYJ Valves are available with lights and surge suppression. SYJ series valves can be configured on base mounted manifolds, or individually on sub-plates, creating a variety of solutions to meet your broadest engineering needs.

The new VM100/200 series is now more lightweight and compact than the conventional model. The series has a variety of actuator types to choose from. Also, with piping options of side ported and bottom ported, it is now possible to choose the mounting method with the side ported.

The C85 series single rod, double acting, conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.

CP96, profile tube design ISO cylinder with enclosed tie rods, is available in 6 bore sizes from 32 to 125mm. The series is available with a single or double rod in 6 bore sizes from 32 to 125mm. The air cushion and bumper cushion combination greatly reduces noise at the end of stroke. High accuracy covers and tie rod nuts improve mounting accuracy and extend the cylinder life. Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod. Standard strokes range from 25 to 800mm.

SMC s updated VXD series for water is a pilot operated, 2 port solenoid valve. The renewed VXD is not only smaller, but uses less power compared to the previous version. Available in brass and stainless steel, the VXD series also offers low concentration ozone resistant and oil free options. Flow rate ranges from Cv of 1.9 to 49

The new VM100/200 series is now more lightweight and compact than the conventional model. The series has a variety of actuator types to choose from. Also, with piping options of side ported and bottom ported, it is now possible to choose the mounting method with the side ported.

CP96, profile tube design ISO cylinder with enclosed tie rods, is available in 6 bore sizes from 32 to 125mm. The series is available with a single or double rod in 6 bore sizes from 32 to 125mm. The air cushion and bumper cushion combination greatly reduces noise at the end of stroke. High accuracy covers and tie rod nuts improve mounting accuracy and extend the cylinder life. Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod. Standard strokes range from 25 to 800mm.

Series CM2-Z double acting, single rod, stainless steel cylinders are compact, lightweight and offer high performance. The piston seal and rod seal design provides excellent life. Transparent auto switch bracket provides visibility of the status of the switch. The CM2-Z series delivers extra flexibility including the option of male and female rods. Where space is at a premium, you can select a female rod end (up to 29 mm shorter) and/or boss-cut type (up to 16 mm shorter). Rubber bumpers are standard. The CM2-Z series offers a variety of mounting options.

CP96, profile tube design ISO cylinder with enclosed tie rods, is available in 6 bore sizes from 32 to 125mm. The series is available with a single or double rod in 6 bore sizes from 32 to 125mm. The air cushion and bumper cushion combination greatly reduces noise at the end of stroke. High accuracy covers and tie rod nuts improve mounting accuracy and extend the cylinder life. Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod. Standard strokes range from 25 to 800mm.

The SMC MGPM25TF-100 Compact Guide Cylinder offers exceptional lateral load resistance, more than twice that of conventional stopper cylinders. This is achieved through the use of two types of guide rod bearings, making it suitable for a variety of applications. The cylinder supports four different mounting styles and allows for two-direction piping, providing flexibility in installation. The MGPM25TF-100 is designed without an auto switch but includes a built-in magnet. This model is part of the MGP Series, known for its compact design and robust performance, making it ideal for use in automated systems where space and reliability are critical.Applications: The MGPM25TF-100 is suitable for use in automated manufacturing systems, assembly lines, and other industrial applications where precise and reliable linear motion is required.

SMC has improved product performance and reliability with the redesigned SY series valve. The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved. Side, top and bottom port/pipe directions are available to allow flexible installation. The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted. *** We are currently experiencing long lead times for some SY products. Please consult with SMC Representative for alternatives ***

The series CUK single non-rotating rod, double acting free mount cylinder saves space and allows direct and precise mounting. It is available in 6mm to 32mm bore sizes with stroke lengths up to 50mm. Options include auto-switch capabilities, free mount choices, recessed switch mounting grooves and rubber bumpers standard.

The C85 series single rod, double acting, conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.

The SMC VQC1000/2000 Manifold Block Assembly VVQC2000-1A-D-C8 is designed for efficient and flexible pneumatic control. This manifold assembly is compatible with the VQC1000/2000 series and features an IP67 enclosure for superior dust-tight and immersion-proof protection, ensuring reliable operation in harsh environments.Its space-saving design positions all solenoids and fittings on one side, allowing for free mounting and easy installation. The assembly supports a variety of common wiring methods and includes a 4 position, dual 3 port valve. The innovative one-clamp structure eliminates the need for screws, reducing recombination labor and simplifying maintenance.With the capability to connect up to 9 units in any order, the manifold assembly supports various fieldbus protocols, including DeviceNet®, PROFIBUS DP, CC-Link, EtherNet/IP™, EtherCAT, and PROFINET. It is also compatible with wireless systems and features a self-diagnosis function for proactive maintenance.This assembly is ideal for applications requiring flexible adaptation, such as added stations and changed specifications, made possible with a multi-pin connector manifold. It is also suitable for ISO 13849-compliant safety systems, supporting safety communication protocols like PROFIsafe.

The SMC SY3120-5MOU-C6-Q is a highly efficient 5 port solenoid valve designed for versatile industrial applications. This valve features a power consumption of just 0.1 W thanks to its power-saving circuit, making it ideal for energy-conscious operations. The SY3120-5MOU-C6-Q supports a wide variety of manifold options, including aluminum body manifolds, DIN rail, and stacking type manifolds, providing flexibility in installation and configuration.Engineered for reliability, this valve includes a push-turn locking type manual override and is equipped with a light/surge voltage suppressor to protect against electrical surges. The valve is CE-compliant, ensuring it meets rigorous European safety and performance standards.Applications for the SY3120-5MOU-C6-Q are extensive, including automation systems, pneumatic control circuits, and various industrial machinery. Its compact dimensions and robust construction make it suitable for integration into tight spaces while maintaining high performance and durability.

The VXZ series for water is a 2 port, pilot operated solenoid valve capable of operating at higher differential pressures by maintaining a zero differential pressure on the seat. The molded coil offers low power consumption, long life and high reliability. Standard NBR seal and optional FKM seal for use with deionized water. Available for port sizes ranging from 1/4 to 1 inch. Flow rate ranges from Cv of 1.9 to 10.2.

SMC s VP300/500/700 series solenoid valve, offers high flow capacity and reduced power consumption (1.55W standard, 0.55W with power saving circuit). The series may be used as either a selector valve, or a divider valve. It is vacuum applicable up to –101.2kPa. Series VP3145/3165/3185 is a large size, 3 port solenoid valve with a rubber seal. It is possible to use the series in vacuum applications or under low pressure. Both series are available in a normally closed or normally open styles.

The Series C(D)J2-Z double acting single rod air cylinders are designed for precision and versatility. Available in bore sizes of 10mm and 16mm with stroke lengths ranging from 15mm to 200mm, these cylinders offer a wide range of applications. They come in seven mounting types, ensuring adaptability across various environments. Optional features include air cushion for smooth operation, customizable port locations, and magnet for auto-switch capability. The cylinder can be ordered with pivot and rod end brackets under one part number, simplifying the ordering process.

C55 double acting, air operated cylinders were designed to meet a broad range of automation machine applications. The C55 series achieves outstanding load performance due to its unique rubber bumpers, piston wear ring, and rod bushing. Standardized mounting options conform to both ISO 21287 and 6431.

The Series SY represents a significant leap forward in valve performance, delivering cost-effective solutions to meet your diverse requirements. This series is characterized by its high flow capabilities and efficient power consumption within a compact form factor.The SY series is available in two styles: body ported or base mounted. It can be used individually or manifold mounted, providing flexibility for various applications.