PLC

The Altivar 212 is a versatile variable speed drive designed for fluid management applications in tertiary sector buildings. It can feed 3-phase asynchronous motors and offers a protection index of IP21 with built-in EMC filter. Its design is eco-friendly, reducing energy consumption by up to 70% compared to conventional control systems. The Altivar 212 drive weighs 55.4kg and has dimensions of 320mm wide, 630mm high, and 290mm deep. It is designed for common fluid management applications such as heating, ventilation, air conditioning, and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor, and limit disturbance at the motor terminals. It is designed to be mounted in a vertical position on a panel, with 4 fixing holes for easy installation. The Altivar 212 drive supports numerous communication protocols including Modbus, METASYS N2, APOGEE FLN P1, and BACnet. This makes it easily adaptable to all building management systems.

The Siemens MSP S00 Circuit Breaker is a high-quality solution designed for motor protection in various industrial applications. Key Features: Class 10 rated A-release: 2.8...4 A N-release: 52 A Spring-type terminal for easy connection Standard switching capacity This circuit breaker is a reliable choice for ensuring the safety and efficiency of your motor systems. Its robust construction and advanced features make it an ideal solution for demanding industrial environments.

This Multi9 C60BPR is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 30A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 127mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 30kW / 40hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. This drive features multi-protocol Ethernet embedded, it consists of Ethernet IP and Modbus TCP communication interfaces. it weighs 27.9kg and its dimensions are, 213mm wide, 660mm high, 262mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The PLC-OSC-230UC/ 48DC/100/SEN solid-state relay module serves as a PLC interface for input functions. It comprises a PLC-BSC.../SEN basic terminal block equipped with a screw connection and a plug-in miniature solid-state relay, suitable for mounting on a DIN rail NS 35/7.5. The device operates with an input voltage of 230 V AC or 220 V DC and delivers an output voltage range from 3 V DC to 48 V DC with a maximum continuous current of 100 mA.This relay module is characterized by its compact dimensions, measuring 6.2 mm in width, 80 mm in height, and 94 mm in depth. It features a 1 N/O contact configuration with a typical response time of 3 ms and a turn-off time of 5 ms. The input voltage range is specified as 184 V AC to 253 V AC, with a nominal input voltage of 230 V AC, allowing for flexibility in various applications.The device supports a basic insulation level and is compliant with the overvoltage category III and pollution degree 2. It is designed to operate in ambient temperatures ranging from -25 °C to 60 °C, and it is suitable for storage and transport within a temperature range of -25 °C to 70 °C. The relay also features protective measures including reverse polarity protection and a polarity protection diode.For installation, the module is designed for any mounting position on the DIN rail and can accommodate conductor cross-sections from 0.14 mm² to 2.5 mm². The tightening torque is specified between 0.6 Nm and 0.8 Nm. Compliance with relevant EMC and Low Voltage Directives ensures its reliability in industrial environments.

The Siemens Class 10, A-Rel. 22-32A, N-Rel. 416A Screw Terminal Circuit Breaker is designed for motor protection applications. It features a screw terminal and offers a standard switching capacity. This circuit breaker is suitable for A-release ratings ranging from 22 to 32 Amperes and N-release rating of 416 Amperes.The Siemens Class 10, A-Rel. 22-32A, N-Rel. 416A Screw Terminal Circuit Breaker is a reliable solution for motor protection in various industrial applications. Its screw terminal design ensures easy installation and maintenance. The circuit breaker's standard switching capacity makes it a versatile choice for a wide range of applications.

TeSys GV extended rotary handle, for motor circuit breakers GV4 mounted inside an enclosure and to be operated externally. For emergency switch usage, it provides a red handle on yellow front plate with indication of 3 positions OFF, ON, TRIP. To be mounted on the door of the enclosure, the handle mechanism ensures an IP65 protection to the mounting. It also includes a mounting adaptor to be screwed on the face of the circuit breaker, and an extension shaft to be be adjusted in length (distance between the door and the back of the circuit breaker must be in range 214-627mm). Padlockable in OFF position with up to 3 padlocks (to be ordered separately). Green Premium compliant (RoHS/REACh).

The TeSys D contactors are designed for seamless integration into control systems, catering to a wide range of applications. They are available in multiple ratings, supporting inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps.This particular 4 pole IEC contactor is suitable for mounting on DIN rail or directly on a panel. It features four normally open power contacts with an 80A resistive load rating. The contactor is equipped with a 240 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard.The contactor's dimensions are 4.80 inches in height, 2.76 inches in width, and 4.72 inches in depth. It weighs approximately 2.54 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and it meets the RoHS/REACh requirements, making it a Green Premium product.

Introducing the Altivar Process ATV600, a robust variable speed drive that offers exceptional performance and flexibility. This device is capable of feeding 3-phase synchronous and asynchronous power motors with its 3 built-in RJ45 communication ports, 1 Ethernet port, and 2 serial ports. Operating at a rated supply voltage from 380V to 480V AC, this drive provides up to 30% energy saving when on standby due to its innovative 'Stop and Go' operation. It is suitable for motors with power ratings up to 3kW for applications requiring slight overload (up to 120%) and up to 2.2kW/3hp for applications requiring significant overload (up to 150%). Weighing 4.6kg, the Altivar Process ATV600 has dimensions of 144mm wide, 350mm high, and 203mm deep. This drive is ideal for fluids management processing and energy saving, making it suitable for a variety of applications including water and wastewater, mining, minerals and metals, oil and gas, and food and beverage. Accessories such as fan kits and graphic display terminals are available with Altivar Process ATV600 drives, depending on the drive rating. This device is designed to be mounted in a vertical position (+/- 10°) on a wall, making it a versatile addition to any industrial setting. The Altivar Process ATV600 meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting energy management, asset management, and overall performance of the process. Its innovative design and features make it a valuable addition to any industrial automation system.

The PLC-RPT- 24DC/21HC/MS is a relay module designed for use in PLC interfaces. It comprises a relay base and a pluggable power contact relay, allowing for manual operation. The module integrates a status LED for operational visibility and utilizes a push-in connection method. Operating at a nominal input voltage of 24 V DC, this relay ensures reliable performance with a typical input current of 18 mA and a maximum switching voltage of 250 V AC/DC. It features one changeover contact and a mechanical service life of 5 million cycles, demonstrating its durability. The relay's compact dimensions are 14 mm in width, 80 mm in height, and 104 mm in depth, making it suitable for various installations. Safety measures include reverse polarity protection and a freewheeling diode, ensuring secure operation. The module is rated for a maximum inrush current of 24 A over 20 ms and can handle a limiting continuous current of 10 A. Designed for diverse environments, it operates within a temperature range of -40 °C to 60 °C and can withstand altitudes up to 2000 m. Compliance with various standards ensures its reliability in numerous applications.

OHB45J6, pistol handle for base and DIN-rail mounted switches. Suitable for shaft diameter 6 mm. Color black, handle length 45 mm. IP65, NEMA 1, 3R, 12, padlockable with three padlocks in OFF-position, door interlock in ON-position. Screw fixing from the back side of the handle. No screws on the front ensures double insulation.

This product is a component of the Lexium series, which includes motion servo drives and servo motors. This cable serves as an accessory for encoder systems. It boasts a length of 20 meters. Equipped with M23 and RJ45 connectors for electrical connection, it features a composition of 3 x (2 x 0.14mm²) + (2 x 0.34mm²). This cable is designed to link servo motors with servo drives. It weighs approximately 1.4kg.This product is specifically compatible with the Lexium 32 SinCos Hiperface encoder.

This Magelis XBTZ is a RS 485 cable for Modbus serial link. It is equipped with one male RJ45 connector at each end. it is 2.5 meters long. It enables direct connection between Magelis XBT terminals and PLCs.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 42 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames It works at a rated power up to 15kW / 20hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 6.9kg and its dimensions are 180mm wide, 330mm high, 192mm deep. Altivar Machine ATV320 meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in two packages. It is designed to be mounted in vertical position on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The SIMATIC S7-300 is a robust temperature control module designed to provide precise temperature regulation. Equipped with 4 channels, this module offers both step and pulse operation, making it an ideal choice for applications requiring fine-tuned temperature adjustments.The FM355S model is specifically designed to cater to the needs of industries demanding high precision in temperature control. It features 4 AI (Analog Input), 8 DI (Digital Input), and 8 DO (Digital Output) channels, ensuring comprehensive data input and output capabilities.This module comes with a multi-language configuration package, including manuals and getting started guides in German, English, French, and Italian. The package is conveniently provided on a CD-ROM, making it easily accessible for users worldwide.

Interruttore automatico TeSys GB, 1 polo (1P), 1A/250V IEC/277V UL, per la protezione dei circuiti di controllo delle apparecchiature industriali. Fornisce una protezione magnetotermica con un livello di intervento magnetico a 14 A (13 In) e un potere di interruzione Icu 50kA@240V. Può essere utilizzato anche per la protezione di carichi CC fino a 1A/48V DC-13 con un potere di interruzione Icu 1.5kA@24V. Dispositivo compatto (larghezza 15 mm), montaggio su guida DIN da 35 mm, controllo tramite leva a levetta (start-stop garantito per 8000 cicli). Venduto in lotti di 6 unità. Certificato multi standard (IEC, UL, CSA), prodotto Green Premium (RoHS/REACh).

This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The analogue I/O module provides 2 inputs, 1 output with 16bit, 15bit + sign input resolution. It is an I/O module with a rated supply voltage of 24V DC, a current consumption of 60mA, 55mA at 5V DC via bus connector, 55mA, 80mA at 24V DC via external supply. This product is capable of controlling variable speed drives or any device equipped with a current or voltage input. There is an insulation between input and supply at 1500V AC, input and internal logic at 500V AC, output and supply at 1500V AC and output and internal logic at 500V AC. It is furnished with removable screw terminal for electrical connection with 5.08mm pitch adjustment for inputs, outputs and supply. It is an IP20 rated product. Its dimensions are 23.6mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.115kg. This product is certified by CE. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.

Product Overview: The Modicon X80 Cord Set is an integral part of the Modicon X80 range, a versatile platform of modules designed for use with Modicon M580 and M340 Programmable Automation Controllers (PAC). This cord set serves as an accessory to the I/O module, offering a length of 1.5 meters. Technical Specifications: 25-way SUB-D connector for sub-base side 20-way removable terminal block for module side Weight: 0.32kg Compatibility: Compatible with Modicon X80 ABE7CPA410 connection sub-base Compatible with Modicon ABE7CPA02 connection sub-base Compatible with Modicon X80 BMXAMI0410 analogue input module Benefits: This cord set is designed for medium to large process applications, offering high-quality performance and innovative technology. It's part of the Modicon X80 common platform, which reduces maintenance and training costs by sharing spare parts and unique training across different Programmable Automation Controllers (PAC).

The SINAMICS G120D Power Module PM250D is a high-performance power module designed for industrial applications. It features an integrated Class A filter that allows for efficient energy recovery, enhancing the overall performance of your system. This module operates at 380-480V with a frequency range of 47-63Hz and can handle high overloads up to 7.5kW at 200% for 3 seconds, 150% for 60 seconds, and 100% for 300 seconds. It is designed to operate in ambient temperatures ranging from -10°C to +55°C. The module measures 210 x 450 x 220 mm (HxWxD) and offers a degree of protection IP65 without the need for a control unit. This makes it suitable for use in a wide range of industrial environments.