Quadri di baixa tensione

INTERRUTTORE DI BASSA TENSIONE SIEMENS 3VA IEC A CASSETTA CON UNITÀ DI SGANCIO TERMOMAGNETICA. TELAIO 3VA11 CON BASSA CAPACITÀ DI INTERVENTO (CLASSE N). 125A, 3 POLI Icu: (7KAIC A 690V) (25KAIC A 415V). UNITÀ DI SGANCIO TM240 CON REGOLAZIONE Ir REGOLABILE Ii. CARATTERISTICHE SPECIALI: CONNESSIONE CON TERMINALE A SCATOLA / MORSA IN ACCIAIO AVVOLGENTE. DIMENSIONI (L x A x P) IN POLLICI: 3 x 5,1 x 3,5.

Accessorio della serie di relè per uso generico legacy, clip di fissaggio ID in plastica Relè e prese serie 782. In combinazione con le prese offre soluzioni personalizzabili per l'automazione, il fissaggio del relè nella presa o l'espulsione del relè dalla presa. Viene fornito in pacchetti da 10 paci.

The product is a miniature circuit breaker with two poles, rated for a current of 8 Amps and suitable for an operational voltage of 480 VAC. Complying with UL1077 standards, it features a trip characteristic curve of type D and has a width of 36mm and a depth of 70mm.With an operational voltage of 400 V, this device supports AC voltage and is rated for a short-circuit breaking capacity of 10 kA according to EN 60898. The miniature circuit breaker is designed with a Pollution Degree of 3 and an IP20 degree of protection, making it suitable for various industrial applications.Additionally, it is built to withstand environmental conditions ranging from -40 °C to 70 °C and is compliant with IEC / EN 60898-1, IEC / EN 60947-2, and UL1077 standards. The device also features a mechanical service life of approximately 10,000 operating cycles.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 80A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 150A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 175A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The VCCDN20 is a robust 3-pole TeSys Vario switch-disconnector from Schneider Electric, specifically designed for emergency stop switching in motor applications. It is rated at 5.5kW@400V AC-23 and offers an IP65 protection when mounted on the back of an enclosure.This product consists of a VZ20 Vario switch body, an extension shaft, and a padlockable red & yellow operator with a single fixing. It is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach).The VCCDN20 is designed for 690V AC operation, with DC operation permitted until 250V. It also allows the attachment of 2 add-on poles: main (VZN20), neutral (VZN11), earthing (VZN14), auxiliary (VZN05, VZN06).

The Light Block ZBV features an integral LED light source, characterized by its orange illumination, and operates within a supply voltage range of 110V to 120V AC at 50/60 Hz. Designed for compatibility with the Harmony XB4 and XB5 series, it includes screw clamp terminals for easy installation and maintenance. The product is suitable for direct mounting and is constructed from a durable plastic body.With a current consumption of 14 mA and a service life of 100,000 hours at rated voltage and 25 °C, this device minimizes downtime associated with replacements. It is equipped with an IP20 protection rating, ensuring operator safety by preventing unexpected contact with live circuits. The robust screw clamp connection terminals provide high vibration resistance, making this light block ideal for installation on machinery exposed to significant impact.Furthermore, it complies with several standards, including EN/IEC 60947-1 and UL 508, and meets various environmental requirements, including RoHS compliance. Its compact design allows for seamless integration into existing control systems, facilitating effective visual signaling in a variety of industrial applications.

This Acti9 Linergy FH monoconnect connector for Acti9 iC60 and Acti9 iK60 facilitates comb busbar power supply. It is a set of 4 devices. The Type of electric connection is PIN. The pin cross section is 16mm2. The cross section of the cable connector is 35mm2. The tightening torque is 4N.m. The color of the device is white RAL9003. The pollution degree is 3. It complies with IEC 60947-7-1 and IEC 61439-2 standards.

The Phase Sequence Relay CM-PFE is a robust and reliable device, specifically engineered to monitor the phase sequence of electrical systems. Its width measures 22.5mm, making it suitable for various industrial installations. The measuring range spans from 208 to 440VAC, ensuring compatibility with a wide array of voltage requirements. Powered by an internal measuring circuit, this relay operates on the principle of closed circuits (1 c/o), providing accurate and dependable performance in real-time applications. Its compact design and high precision make it an ideal choice for industrial automation systems.

LR3D35 is a TeSys LRD thermal overload relay from Schneider Electric to be used with a TeSys D contactor. It protects motors 15-18.5kW@400V thanks to a thermal range 30-38A , a tripping class 10A, for use with unbalanced loads. LR3D35 is a TeSys LRD thermal overload relay from Schneider Electric for direct mounting on TeSys D contactors. With a thermal setting range 30-38A and tripping class 10A, it protects unbalanced loads and motors 15-18.5kW@400V. It provides manual test & reset buttons, automatic reset, trip auxiliary contact and flag indicator. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Thermal overload protection relay, bimetallic type, for use with unbalanced loads (non differential). Direct mounting on the bottom terminals of a Tesys contactor LC1D32 and D38 to form a compact starter. Light and compact, 45mm wide. Temperature compensated for a good accuracy of the protection. Manual control with test & reset buttons, manual / automatic reset selector. Trip signaling with 1NO+1NC auxiliary contacts and trip flag indicator. Can be completed with terminal blocks for separate mounting (LAD7B, LAD96) and remote control devices (LAD703, LA7D03).

The Schneider Electric TeSys GB2 Thermal Magnetic Circuit Protector is a reliable solution for the protection of industrial equipment control circuits. With a magnetic tripping level at 66A and a breaking capacity of 2kA@415V, this compact device (30mm wide) offers robust thermal-magnetic protection. It can also be used for protection of DC loads up to 5A/48V DC-13 with a breaking capacity Icu 1.5kA@24V. The control is achieved through a toggle lever, ensuring start-stop guaranteed for 8000 cycles. This Green Premium product (RoHS/REACh) conforms to IEC 60947-1 and IEC 60947-2 standards, making it an ideal choice for industrial applications.

The switch disconnector fuse is designed for three-pole operation (3P) and supports a maximum current rating of 600A at 1000V. It is specifically suitable for use with class J fuse links, catering to motor applications that can reach up to 355kW at 400V AC-23. This model features an external front-side mounting operating handle, available in several configurations. The device incorporates screw terminals that require upstream and downstream terminal shrouds (GS1AP73), sold separately, ensuring compliance with high short-circuit current ratings of up to 200kA at 600V. Additionally, the assembly can be enhanced with auxiliary contact modules, which include front-mounted (GS1AM) for early-break and position signaling and side-mounted (GS1AN) for position signaling, which are also available separately. The product is UL and CSA certified, aligning with Green Premium standards, including RoHS and REACh compliance. With an ambient air temperature operating range of -20 to 70 °C and a storage temperature range of -40 to 80 °C, this switch disconnector fuse is built to withstand various environmental conditions. Its dimensions include a height of 300 mm, width of 364 mm, and depth of 250 mm, with a net weight of 29 kg. The device is rated with an IP20 protection class, conforming to IEC 60529 when equipped with a terminal cover.

The 230/460V, 22MM SSZP CON, 50A, SCRW, 24VDC is a solid-state contactor designed for 1-phase operation. It features screw terminals and can handle up to 50 amps at 230 VAC to 460 VAC with a coil voltage of 24 VDC.This contactor is available in DIN rail or panel mount configurations, with a relay width of 22.5 mm and a heat sink width of 67 mm. It is designed for zero-point switching and comes with UL File E143112 in Vol.1 Sec.8.

The Schneider Electric TeSys GV2 Manual Starter and Protector is a robust and reliable solution for motor protection. This thermal magnetic circuit protector features a toggle switch and is designed to handle high inrush currents, making it ideal for motor applications. With a thermal setting range of 2.5-4 A and a magnetic tripping level of 20xIn, it ensures comprehensive protection for motors and transformers.The GV2 series offers a modern look and is easy to install and operate with multi-standard screws. The EverLink terminals provide a secure and durable power connection. The device is capable of handling up to 100,000 AC-3 cycles, ensuring long-lasting performance. It is suitable for use in various applications, including three-phase transformers.Compliance with multiple standards such as IEC, UL, CSA, CCC, and EAC, along with marine certifications, ensures its reliability and safety. The Green Premium label signifies Schneider Electric's commitment to delivering eco-friendly products with low CO2 emissions and adherence to the latest regulations.

The Siemens Overload Relay is designed to provide reliable motor protection, offering a range of capacities from 50 to 200 Amps. This overload relay is available in size S6 and Class 10E for easy mounting on contactors or stand-alone installation. It features a straight-through transformer for the main circuit and screw terminals for the auxiliary circuit, ensuring seamless integration into your system.The manual-automatic-reset feature of this overload relay ensures efficient protection against overloads and short circuits. With its robust construction and high-quality components, the Siemens Overload Relay is a reliable choice for motor protection in various industrial applications.

The Additional Neutral Block designed for TeSys Vario switch-disconnectors operates within a rated current range of 12A to 40A at a voltage of 690V AC. This module is compatible with switch bodies V02 to V2 and features contacts that provide early make and late break action. The device is certified under multiple standards, including IEC, UL, and CSA, and adheres to Green Premium compliance, ensuring it meets various environmental regulations.With an operational temperature range of -20°C to 50°C, this neutral block is suitable for diverse industrial environments. It exhibits a mechanical durability of up to 100,000 cycles and an electrical durability of 30,000 cycles at DC-1 to DC-5 and 100,000 cycles at AC-21. The product also features a rated impulse withstand voltage of 6 kV and an IP20 protection class, making it robust against dust and contact with solid objects.In terms of connectivity, it utilizes screw clamp terminals accommodating flexible cables of 6 mm² and solid cables of 10 mm². The module's dimensions are 74 mm in height, 16 mm in width, and 35 mm in depth, with a net weight of 0.05 kg. Compliance with various international standards ensures its reliability and performance in critical applications.

SUPPLEMENTARY PROTECTOR,3P+N,1A,CURVE C Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 3 + N Pole, 1 Amps, 480 VAC, Trip Characteristic Curve C, 72mm Width, 70mm Depth, UL File E116386 in Vol. 1 Sec. 2

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This single-phase solid state relay is designed for DIN rail mounting and is part of the Harmony modular relay series. It has a power rating of 30 A and is equipped with a zero voltage switching output mode. The control circuit operates within a voltage range of 4 V to 32 V DC, while the load output can handle voltages from 48 V to 660 V AC, making it suitable for various applications including packaging, plastic molding, textiles, and heating furnaces. It features a control input voltage LED indicator that is illuminated in green, indicating the operational status. The relay is maintenance-free and boasts unlimited lifespan due to its fully electronic construction. With a weight of 280 g and dimensions of 22.5 mm in width, 98.8 mm in height, and 97.7 mm in depth, it can be easily integrated into existing setups. The product carries an IP20 protection index and a maximum leakage current of 1 mA in the off-state, ensuring safe operation. It supports symmetrical DIN rail mounting, and installation is facilitated by screw terminals capable of accommodating wire sizes between AWG 24 and AWG 10. The relay also delivers a maximum surge current of 1200 A for 16.6 ms and has a response time of 0.5 cycles for both turn-on and turn-off operations. The product complies with multiple certifications including CSA, UL, and EAC, in addition to meeting relevant environmental standards.

The CR-U230AC2 pluggable interface relay is from the CR-U (universal) relay range. This relay operates with a 230 V AC rated control supply voltage and has 2 c/o (SPDT) output contacts rated at 250 V / 10 A. The relay has an integrated orange test button for manual actuation and locking of the output contacts. Standard sockets, pluggable function modules, holder and marker are available as accessories.

The TeSys GV short circuit current limiter block is designed for motor circuit breakers, specifically the GV2L/LE/P/ME/RT models. This device significantly increases the circuit breaker's ability to withstand a short circuit current, raising it from 50 kA to 100/130 kA at 400 V.To be installed on top of a GV2 motor circuit breaker, this current limiter is RoHS/REACh compliant. Its activation threshold is set at 1.5kA, ensuring optimal protection against short circuits while maintaining safety and efficiency.