Quadri di baixa tensione

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 115A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 30HP at 200 to 208VAC, 40HP at 240VAC, 75HP at 480VAC and 100HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with a 600VAC up to 250A circuit breaker, this contactor can have a SCCR up to 50kA. When used with 600VAC Class J or CC fuses up to 250A, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca non-reversing IEC contactor is a versatile solution designed for seamless integration into control systems. This contactor is ideal for creating motor starters in various applications, offering a wide range of contactor ratings up to 150 full-load amps and resistive loads up to 200 amps. This specific model, rated at 115A for inductive loads, is designed for three-phase operation. It can be mounted on a DIN rail or directly onto a panel. The contactor boasts both Horsepower and Kw motor ratings for international acceptance, with ratings ranging from 30HP to 100HP at different voltage levels. When paired with a 480VAC circuit breaker up to 250A, this contactor can handle SCCR up to 100kA. For applications requiring higher currents and voltages, it can be used with a 600VAC circuit breaker or fuses, maintaining an SCCR of up to 50kA or 100kA respectively. The contactor comes equipped with a 115 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified for enhanced reliability. Screw clamp terminals are used for load and auxiliary connections, ensuring secure and efficient operation. With its compact dimensions of 6.22 inches in height, 4.72 inches in width, and 5.35 inches in depth, this contactor is designed to fit seamlessly into various control systems. It weighs 5.51 lbs and is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, as well as meeting RoHS/REACh requirements for environmental sustainability.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Engineered for seamless integration into control systems, the TeSys D series of contactors provides a versatile solution for motor starting across diverse applications. This 12A IEC contactor is rated for both horsepower (HP) and kilowatt (kW) motor ratings to ensure global compatibility. It delivers 3 HP at 200-208 VAC, 3 HP at 240 VAC, 7.5 HP at 480 VAC, and 10 HP at 600 VAC for three-phase applications, alongside 0.5 HP at 115 VAC and 2 HP at 240 VAC for single-phase loads. The contactor can be easily mounted on a DIN rail or directly to a panel. When paired with an appropriately sized circuit breaker or fuse, it achieves a Short Circuit Current Rating (SCCR) of up to 100kA. Specifically, when utilized with a 480 VAC circuit breaker rated up to 35A, the SCCR reaches 85kA; employing a 600 VAC 30A Class J or CC fuse enables an SCCR of 100kA. The device incorporates a standard 48 VAC 50/60 Hz coil for reliable operation and includes one normally open (NO) and one normally closed (NC) auxiliary contact, with the NC contact being mirror certified. Connections are facilitated through screw clamp terminals for both load and auxiliary circuits. A broad selection of accessories is available to accommodate a wide range of application needs. The compact dimensions of 3.03 inches in height, 1.77 inches in width, and 3.39 inches in depth, combined with a weight of 0.72 lbs, ensure ease of installation. This contactor conforms to stringent international standards including UL, CSA, IEC, CCC, EAC, and Marine certifications and is compliant with RoHS/REACh directives, qualifying it as a Green Premium product.

The TeSys D contactors are designed for seamless integration into control systems. They can be used to create motor starters for various applications. These contactors come in 13 different ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This particular 4 pole IEC contactor is available in an open style, making it easy to mount on a DIN rail or directly on a panel. It features two normally open (NO) and two normally closed (NC) power contacts with a resistive load rating of 25A. The contactor also comes with a 24VDC coil and a transient suppressor module for added protection.In addition, the contactor has one normally open and one normally closed auxiliary contact built-in as standard. These contacts are mirror certified for enhanced reliability. The load and auxiliary connections are made through screw clamp terminals, ensuring secure and efficient connections.This IEC contactor is 3.35 inches tall, 1.77 inches wide, and 3.90 inches deep, weighing 1.16 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications. Furthermore, it meets the requirements of RoHS/REACh, making it an environmentally friendly option.

The TeSys D contactor series is engineered to provide optimal performance in control systems. These contactors can be used as motor starters across a wide range of applications.TeSys D contactors are available in 13 different ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This particular 115A inductive 3 pole IEC contactor can be installed on DIN rail or directly onto a panel.The contactor offers both Horsepower and Kw motor ratings for international acceptance. It is rated for 30HP at 200 to 208VAC, 40HP at 240VAC, 75HP at 480VAC, and 100HP at 600VAC three-phase.When paired with a 480VAC up to 250A circuit breaker, the contactor can handle SCCR up to 100kA. When used with a 600VAC up to 250A circuit breaker, it can handle SCCR up to 50kA. When used with 600VAC Class J or CC fuses up to 250A, the contactor can handle SCCR up to 100kA.The contactor comes with a 415 VAC 50/60 Hz coil. It has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections.The contactor measures 6.22 inches in height, 4.72 inches in width, and 5.35 inches in depth. It weighs 5.51 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the requirements of RoHS/REACh, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca contactor is a high-performance solution designed to meet the needs of diverse industrial applications. It offers a wide range of contactor ratings, making it suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This specific model is a 12A inductive 3 pole IEC contactor, capable of being mounted on DIN rail or directly onto a panel. It boasts both Horsepower and Kw motor rating for international acceptance, with ratings including 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC, and 10HP at 600VAC three phase.The contactor is equipped with a 24 VDC coil with transient suppressor module and features one normally open and one normally closed auxiliary contact as standard. It also comes with screw clamp terminals for load and auxiliary connections, ensuring easy integration into your system.With its compact size of 3.03 inches tall, 1.77 inches wide, and 3.74 inches deep, weighing just 1.07 lbs, this contactor is designed for versatility and ease of use. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications.Moreover, its compliance with RoHS/REACh standards makes it an environmentally friendly option, contributing to sustainable practices in your industrial setup.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Introducing the TeSys D Contact Relay, a versatile solution engineered for optimal performance in various applications. This non-reversing contactor boasts a robust design that ensures reliable operation under demanding conditions.The TeSys D Contact Relay is available in multiple ratings, catering to both inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. Its compact size and open style design make it ideal for installation on DIN rail or directly onto a panel.This particular model is a 4 pole IEC contactor, equipped with two NO (Normally Open) and two NC (Normally Closed) power contacts. The power contacts are rated at 25A resistive load, ensuring efficient performance in various applications.The contactor comes standard with a low consumption 24VDC coil and an integrated transient suppressor module for enhanced protection against voltage surges. It also features one NO and one NC auxiliary contact as part of its standard configuration.Screw clamp terminals are used for both load and auxiliary connections, ensuring secure and reliable electrical connections. The contactor's dimensions are 3.35 inches tall, 1.77 inches wide, and 3.90 inches deep, making it a space-efficient choice.Certified to UL, CSA, IEC, CCC, EAC, and Marine standards, this contactor is not only reliable but also meets the RoHS/REACh directives, making it an environmentally friendly option. Its extensive line of accessories allows for easy customization to meet specific application requirements.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 2HP at 200 to 208VAC, 2HP at 240VAC, 5HP at 480VAC and 7.5HP at 600VAC three phase. Contactor is also rated for 0.33HP at 115VAC and 1HP at 240VAC single phase. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LADR0 is a Schneider Electric time delay auxiliary contact block for TeSys D and TeSys F contactor. Front mounting block, it provides 1NO+1NC contacts rated up to 10A 690V AC, with an off-delay setting range of 0.1-3s. LADR0 is a Schneider Electric time delay auxiliary contact block for TeSys D and TeSys F contactor. It provides 1NO+1NC contacts rated up to 10A 690V AC and with an off-delay setting range of 0.1-3s. Easy to mount on front by clip-on, it procures high reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Add-on block with 1NO+1NC mechanically linked auxiliary contacts, with time delay operation. Off-delay setting range of 0.1-3s. High electrical durability , several millions of operating cycles in AC-14/AC-15/DC-13 according conditions. Mounting by clip-on on front of all TeSys D and TeSys F contactors.

TeSys D time delay auxiliary contact block, for contactors LC1D, LC1F and control relays CAD. It provides 1NO+1NC contacts rated up to 10A 690V AC, On-delay setting range 10-180s, connection by screw clamp terminals. Clip-on front mounting, it procures high reliability and durability. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 2HP at 200 to 208VAC, 2HP at 240VAC, 5HP at 480VAC and 7.5HP at 600VAC three phase. Contactor is also rated for 0.33HP at 115VAC and 1HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as stanard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.06 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Pressure wire connectors are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 1.16 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 2HP at 200 to 208VAC, 2HP at 240VAC, 5HP at 480VAC and 7.5HP at 600VAC three phase. Contactor is also rated for 0.33HP at 115VAC and 1HP at 240VAC single phase. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 2HP at 200 to 208VAC, 2HP at 240VAC, 5HP at 480VAC and 7.5HP at 600VAC three phase. Contactor is also rated for 0.33HP at 115VAC and 1HP at 240VAC single phase. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca series contactors are engineered for optimal compatibility with various control systems. These non-reversing contactors are versatile, capable of handling a broad spectrum of applications.Available in multiple ratings, these 9A inductive 3 pole IEC contactors can be mounted on DIN rail or directly to panels. They are equipped with both Horsepower and Kw motor rating for international acceptance.The contactor is rated for 2HP at 200-208VAC, 2HP at 240VAC, 5HP at 480VAC, and 7.5HP at 600VAC three phase. It also handles 0.33HP at 115VAC and 1HP at 240VAC single phase.The contactor comes with a 120 VAC 50/60 Hz coil, featuring one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified.Spring terminals are used for load and auxiliary connections. An extensive range of accessories ensures compatibility with most applications. The contactor measures 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth, weighing approximately 0.71 lbs.Certified to UL, CSA, IEC, CCC, EAC, and Marine standards, the contactor also meets RoHS/REACh requirements, making it a Green Premium product.