Quadri di baixa tensione

The A70P Amp-Trap® Form 101 high-speed fuse is engineered for use in higher voltage AC and DC drives, UPS systems, and reduced voltage motor starters. It is particularly suitable for scenarios where a lower l²t is essential alongside superior reliability. With a wide range of available ratings, the A70P is frequently utilized for replacement purposes. Its maximum operating temperature reaches 80 °C, while it can withstand storage temperatures as low as -25 °C and as high as 80 °C.This fuse has an ampere rating of 20 A and a rated voltage of 700 V AC and 650 V DC. The high-speed characteristic ensures it responds quickly to overcurrent conditions, with an AC maximum breaking capacity of 50 kA. The product features a diameter of 0.56 inches and is constructed with a GMG insulating material, ensuring robust performance in demanding environments. The connection terminals, made of tin-plated copper, utilize a bolted type for secure installation.

Designed for versatility, the Relay DRW370024LT includes three change-over (CO) contacts equipped with a lockable test button, constructed from AgCdO. With a rated control voltage of 24 V DC, this relay supports a continuous current of 16 A, making it suitable for various applications. The relay incorporates flat blade connections measuring 4.8 mm x 0.5 mm for streamlined wiring. The unit's dimensions are compact at 36 mm x 36 mm x 48 mm, and it weighs 85.1 g. Notably, it features a mechanical service life of up to 10 million switching cycles and a contact resistance of ≤ 50 mΩ. For operational reliability, the relay's rated switching voltage reaches 400 VAC, with a maximum switching voltage of 400 V AC and 250 V DC. It exhibits an inrush current of 80 A for 50 ms and can handle an AC switching capacity of up to 6400 VA. The switching frequency can reach 1 Hz at rated load. Environmental compliance is ensured with approvals such as CE, cURus, and EAC, and it adheres to standards like IEC 61810-1 and EN 60664-1. The relay operates effectively within a temperature range of -40 °C to 60 °C and a relative humidity of 35% to 85%. Its protection degree is rated at IP20, ensuring adequate insulation and durability.

The FUSE BASE, LV HRC, 630A, 660VAC, 1-POLE is a high-quality fuse base designed for low voltage applications. It features a double busbar connection and is rated at 630A with a voltage of 690 V (1000 V). The fuse base is made from durable materials to ensure long-lasting performance and reliability. Key Features: Double busbar connection for improved conductivity Rated at 630A with a voltage of 690 V (1000 V) Made from durable materials for long-lasting performance and reliability

The TF42-24 Thermal Overload Relay is an economical electromechanical protection device designed for main circuits. It offers dependable and swift protection for motors in the event of overload or phase failure, boasting a trip class 10. The relay also includes temperature compensation, trip contact (NC), signal contact (NO), selectable automatic or manual reset, trip-free mechanism, STOP function, and trip indication. These overload relays can be directly connected to the block contactors.Key Features:Dependable and swift protection for motorsTrip class 10Temperature compensationTrip contact (NC) and signal contact (NO)Selectable automatic or manual resetTrip-free mechanismSTOP functionTrip indicationApplications:Ideal for protecting motors in industrial applications where overload or phase failure may occur.

Temperature Monitoring Relay SIMIREL Conversion Type= Digital deg. C Number of Sensors = 2 Sensor Type = (Sel- Type J;K;T;E;N) Function = (Sel-Over/Under/Window Monitor) Measuring Range = -99+999 Control Voltage = 24..240VUC Screw Terminals

The CT-APS.22S is a single-function electronic time relay from the CT-S timer range. It provides an OFF-delay (delay on break) function with 10 time ranges from 0.05 s to 300 h.This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. A control input works with voltage-related (non-floating) triggering. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The C.BREAKER TMAX T5S 630 is a fixed four-pole circuit breaker with front terminals and solid-state release in AC PR222DS/P-LSI R 630. This product is designed for high reliability and safety, making it an ideal choice for various industrial applications.

The TF42-1.7 Thermal Overload Relay 1.3 ... 1.7 A is an economic electromechanical protection device designed for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device features a trip class 10, ensuring timely response to protect your equipment.Key Features:Temperature compensationTrip contact (NC) and signal contact (NO)Automatic or manual reset selectableTrip-free mechanismSTOP function and trip indicationThe overload relays are connected directly to the block contactors, and single mounting kits are available as accessories. This makes the TF42-1.7 an ideal choice for ensuring the longevity and reliability of your motor systems.

The CM-PFS.S three-phase monitoring relay is designed for accurate measurement of phase sequences in electrical systems. With a width of 22.5mm, this device can measure the voltage range between L1-L2-L3 from 200 to 500VAC at a frequency of 50/60Hz. Powered by the measuring range, the relay operates on the closed circuit principle with two connection points (c/o). It features screw connection technology with double-chamber cage connection terminals for reliable and secure electrical connections.

Safety relay and expansion relay with relay outputs 4NO, +24 VDC supply voltage and screw terminals. For monitoring of safety devices, such as emergency stops, directly in the voltage supply circuit of the relay. Also suitable as expansion relay for a safety relay/safety PLC, in order to increase the number of safe outputs.

TeSys F contactor, 3 poles (3NO), 265A/1000V AC-3, for motor applications up to 132kW@400V. It provides a low sealed consumption 220V 40-400Hz AC coil, bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to its drawer-mounted coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The circuit breaker features a thermal magnetic trip unit and is engineered to protect electrical systems against overloads and short circuits. With a breaking capacity of 14kA at 600VAC, this device ensures reliable operation within its rating limits. The PowerPacT H variant is designed for I-Line applications, allowing for straightforward installation and maintenance.It includes I-Line terminations on the line side along with mechanical lugs on the load side. This breaker operates continuously at 80% of its rated current, specifically within an ABC phase connection. The construction adheres to multiple standards including UL, CSA, NOM, and IEC, ensuring compliance and safety for various applications.Additional features include a dual-break rotating contact mechanism that minimizes peak current during faults and an integral push-to-trip button for manual tripping. The circuit breaker is rated for a maximum ambient temperature of 70 °C and supports operating altitudes up to 6561.68 ft (2000 m) without performance derating. It is also equipped with a toggle control type for user-friendly operation.

This temperature monitoring relay is equipped with a PT100 sensor for accurate temperature measurement. It operates within a range of 0 to 100°C, making it suitable for a wide variety of applications. The relay is designed to operate at a control voltage of 110/230VAC and features screw terminals for easy installation. This product is no longer in production, and the recommended successor is the 3RS2500-1AW30.

LC2D09M7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 220V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D09M7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 4kW@400V. It includes a 220V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 220V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 2 million cycles at 9A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connection by screw clamp terminals.

The Modicon MCM safety controller CPU, equipped with 8 safe digital inputs, 2 start/restart interlock inputs, and 2 output OSSD pairs, offers a robust platform for monitoring and controlling safety functions. It features captive screw clamp terminals for easy electrical connection and an IP20 rating for enhanced durability. The controller's LED indicators provide real-time status updates on power supply, run mode, errors, input status, communication, master enable, restart signal, and output channels. This safety controller is designed to handle a maximum power dissipation of 3W at a rated supply voltage of 24V DC. It weighs 0.25kg and measures 22.5mm (Depth) x 99mm (Height) x 114.5mm (Width), making it compact and easy to install on a 35mm DIN rail conforming to EN 50022. The Modicon MCM safety controller system is compatible with accessories such as memory cards and backplane connectors, providing scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, and up to 32 or 48 diagnostic status outputs. This system is designed to minimize the risk of human access to dangerous moving parts of a machine by monitoring multiple safety functions. The Modicon MCM safety controller CPU is certified by TüV SÜD, meeting industrial safety standards of Category 4, PL e according to EN/ISO 13849-1 and SILCL 3 according to IEC/EN 61508 and IEC/EN 60261.

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

The switch disconnector fuse is designed for three-pole operation (3P) and supports a maximum current rating of 600A at 1000V. It is specifically suitable for use with class J fuse links, catering to motor applications that can reach up to 355kW at 400V AC-23. This model features an external front-side mounting operating handle, available in several configurations. The device incorporates screw terminals that require upstream and downstream terminal shrouds (GS1AP73), sold separately, ensuring compliance with high short-circuit current ratings of up to 200kA at 600V. Additionally, the assembly can be enhanced with auxiliary contact modules, which include front-mounted (GS1AM) for early-break and position signaling and side-mounted (GS1AN) for position signaling, which are also available separately. The product is UL and CSA certified, aligning with Green Premium standards, including RoHS and REACh compliance. With an ambient air temperature operating range of -20 to 70 °C and a storage temperature range of -40 to 80 °C, this switch disconnector fuse is built to withstand various environmental conditions. Its dimensions include a height of 300 mm, width of 364 mm, and depth of 250 mm, with a net weight of 29 kg. The device is rated with an IP20 protection class, conforming to IEC 60529 when equipped with a terminal cover.

The contactor features three poles (3NO) and is rated for 265A under AC-3 utilization category, making it suitable for motor applications up to 132kW at 400V. It operates with a control circuit voltage of 240V AC at a frequency range of 40-400Hz.Designed to handle high operational rates of up to 2400 cycles per hour and endure ambient temperatures up to 55°C, this device ensures reliability in demanding environments. The installation is facilitated by a drawer-mounted coil, complemented by a variety of add-on blocks and accessories which are sold separately. The product is compliant with multiple international standards including IEC, UL, CSA, and others, and adheres to Green Premium guidelines regarding environmental impact.

The AS-I Safety Monitor is equipped with enhanced features for reliable operation. It includes 40ms response time for the signalling circuit and 2 release circuits rated at IP20. This safety monitor adheres to AS-interface safety standards, making it suitable for use up to Category 4 (EN954-1), PL e (EN ISO 13849-1), and SIL 3 (IEC 61508).The device features screw terminal removable terminals and a safe output relay. It is designed for applications requiring high safety levels, such as those in the automation industry.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.