Quadri di baixa tensione

Il relè di sicurezza Pilz PNOZ S9 24VDC 3 NA 1 N/C T è un relè di sicurezza temporizzato versatile e compatto della prestigiosa famiglia di prodotti PNOZsigma. Progettato come modulo di espansione dei contatti, viene utilizzato in combinazione con un relè di sicurezza di base (come PNOZ s3, s4 o s5) per aggiungere uscite di sicurezza ritardate a un circuito di sicurezza.Questo modello funziona con una tensione di alimentazione di 24 V c.c. e fornisce un metodo affidabile per l'implementazione di funzioni di commutazione ritardata in applicazioni di sicurezza, ad esempio consentendo a un motore di arrestarsi completamente prima che una protezione possa essere sbloccata.PNOZ S9 è dotato di un ritardo flessibile e configurabile dall'utente, che può essere impostato tramite un interruttore rotante sul lato anteriore dell'unità. Il ritardo può essere regolato in vari intervalli, in genere da 0,1 a 300 secondi, offrendo un controllo preciso sulla temporizzazione della funzione di sicurezza.La configurazione dell'uscita è composta da 3 contatti di sicurezza temporizzati normalmente aperti (N/A) e 1 contatto ausiliario istantaneo normalmente chiuso (N/C). I contatti di sicurezza vengono utilizzati per controllare i dispositivi a valle nel circuito di sicurezza, mentre il contatto ausiliario viene generalmente utilizzato per scopi di segnalazione o monitoraggio.La "T" nella descrizione indica che questa versione è dotata di morsetti a vite per collegamenti di cablaggio sicuri e affidabili. L'unità è dotata di indicatori LED sulla parte anteriore per una diagnostica chiara, che mostrano lo stato dell'alimentazione, dei contatti di ingresso e di uscita. Come tutte le unità PNOZsigma, è caratterizzato da un design compatto e poco ingombrante, che lo rende ideale per l'utilizzo efficiente dello spazio negli armadi elettrici.

The Phoenix Contact CBM E8 24DC/0.5-10A NO-R is a multi-channel electronic circuit breaker designed to protect up to eight loads at 24 V DC. This advanced device features active current limitation, ensuring enhanced capacity of the upstream power supply. The circuit breaker is equipped with a nominal current assistant and electronic locking of the set nominal currents, providing precise and reliable protection. Designed for easy installation on DIN rails, it offers adjustable current settings per channel, ranging from 0.5 A to 10 A, making it highly versatile for various applications.Key Benefits:Easy configuration with the nominal current assistantActive current limitation improves upstream power supply capacityAdjustable current settings per channel (0.5 A to 10 A)Early signaling and direct information pickup for efficient system monitoringIntelligent detection of under- and overvoltage increases system availabilityIdeal for industrial automation systems, the CBM E8 ensures reliable protection against overloads and short circuits, enhancing the overall safety and efficiency of your electrical installations.

The Schneider Electric LC1F3304P7 is a powerful and reliable industrial automation product designed to meet the demanding needs of modern manufacturing processes. With its advanced features and robust construction, this component is ideal for controlling motors, pumps, and other critical machinery in industrial settings. It is built to last, with durable materials and a compact design that allows for easy installation and maintenance. The LC1F3304P7 incorporates state-of-the-art technology to ensure precise control and efficient operation, providing superior performance and reliability in even the most challenging environments. Whether you are looking to improve efficiency, reduce downtime, or enhance safety, the Schneider Electric LC1F3304P7 is the ideal solution for your industrial automation needs.

INTERRUTTORE VL 150X UL, TIPO CG (N° CAT. NCX3B080) TELAI NON INTERCAMBIABILI CON APPROVAZIONE INTERRUTTORE A UL489 ALTA CAPACITÀ DI INTERRUPCTIONE 3-POLI, VALUTAZIONE NEMA 65KA/480V (INTERRUTTORE A CASSETTA STAMPATA) RILASCIO DI SOVRACCARICO TM, FUNZIONE LI TU=40GRADI CELSIUS IN= 80A CORRENTE NOMINALE II=1000A PROTEZIONE CONTRO CORTOCIRCUITI IR=80A RILASCIO DI SOVRACCARICO PER PROTEZIONE SISTEMA SENZA ACCESSORI DI CONNESSIONE SENZA RILASCIO AUSILIARIO SENZA INTERRUTTORE AUSILIARIO/ALLARME

The Siemens DS1-X ET200S Starter is a robust and versatile solution designed to cater to the demands of various applications. With a power output of 0.25 kW at 400V, this starter is capable of handling a wide range of loads, from 0.7 to 1.0 A. The expandable electromechanical line ensures that it can be tailored to meet the specific requirements of your system. Key Features: AC-3 compatibility for seamless integration with brake control modules Adjustable range from 0.7 to 1.0 A, providing flexibility in application DOL starter design for efficient and reliable operation

The CT-ARE is a single-function electronic time relay from the CT-E timer range. It provides an OFF-delay (true delay on break) function without auxiliary voltage and with a time range from 0.1 s to 10 s. This time relay operates with a rated control supply voltage of 110 - 130 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A.

The System pro M compact S200 miniature circuit breakers are designed to provide current limiting protection. They incorporate two distinct tripping mechanisms: the delayed thermal mechanism for overload protection and the electromechanical mechanism for short-circuit protection. These circuit breakers are available in various characteristics (B, C, D, K, Z), configurations (1P, 1P+N, 2P, 3P, 3P+N, 4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs in the S200 range comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 standards, enabling their use across residential, commercial, and industrial applications. The bottom-fitting auxiliary contact on these MCBs allows for significant space savings.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 240 VAC 50 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 4.92 inches deep. It weighs 3.88 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys F AC coil 110V 40-400Hz (voltage code F7), low inrush consumption, short operating times, for TeSys F 3-pole and 4-pole contactors LC1 F500, FG500. To be associated with a rectifier DR5TF4U (to be ordered separately). It operates in the voltage limits 0.85-1.1 Uc and environments until 70°C. It provides to the contactor high operating rates until 3600 cycles/hour. Green Premium compliant (RoHS/REACh).

8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 50 ampere and a resistive rating of 65 amperes. It also has a 3 HP at 115 VAC single phase, 10 HP at 230 VAC single phase and 15 HP at 230 VAC three phase, 30 HP at 460 VAC three phase and 30 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 4.06 inches by 2.56 inches and 3.67 tall. These contactors are UL component recognized and CSA certified.

This product is a specialized cooling fan designed to work with Schneider Electric's Altivar Process 600 and 900 variable speed drives. The fan is suitable for applications ranging from 110kW to 315kW and operates at voltages between 380V and 440V. It is designed to enhance the lifespan of the drive by efficiently dissipating heat.The fan features a fixed body made of plastic, with dimensions of 11cm (width) x 10cm (length) x 10cm (height), and weighs approximately 1.2kg. It is compatible with Altivar Process drives from ATV630C11N4F to C31N4F, ATV650C11N4F to C31N4F, ATV930C11N4F to C31N4F, and ATV950C11N4F to C31N4F. The kit includes one door fan, one bracket, and an instruction sheet.This cooling fan is ideal for use in variable speed drives for pumps, fans or compressors up to 2600 kW, as well as conveyors, cranes, or mills up to 2600 kW. Its compact design and high efficiency make it a valuable addition to any industrial automation system.

The 3PH MANUAL STR 6 3-9 0A is a versatile manual motor protector designed to safeguard motors operating within the 6.3 to 9 amps range. This reliable device has been succeeded by the MS132-10 manual motor protector, ensuring continued protection and performance in industrial applications.Key Features:Manual motor protectionCurrent range: 6.3 to 9 ampsReplaced by MS132-10Ideal for:Industrial applicationsMotor control centers (MCC)Distribution systems without backup fuses

Enhance your electrical system's safety with the Siemens BQ2B050QXD Low Voltage Molded Case Circuit Breaker (MCCB). This general-purpose circuit protection device, part of the Siemens BQXD series, is engineered for efficient and dependable operation.The BQ2B050QXD is a 2-pole common-trip circuit breaker, ensuring simultaneous interruption of both poles for enhanced safety. Rated for 120/240V and a 50 Ampere capacity, it provides essential overcurrent protection. With an impressive 10 kA interrupting rating (AIR), this MCCB is built to handle significant fault currents. Its special features include convenient DIN rail mounting for quick and easy installation, along with line-side lug connectors and load-side Quick-Connects for versatile and secure wiring options. This Siemens MCCB is an ideal choice for diverse residential, commercial, and light industrial applications requiring compact and reliable circuit protection.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

System pro M compact S200U miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (K,Z), configurations (1P,2P,3P,4P), breaking capacities (up to 10 kA) and rated currents (up to 63A). All MCBs of the product range S200U comply with IEC/EN 609 47-2, UL489 and CSA 22.2 No. 5, allowing the use for commercial and industrial applications.

Miniature Circuit Breaker, Branch Circuit Protection, Rated Current 0.5 Amps, 2 Pole, Interrupt Rating 10 kA, Thermal Magnetic Trip Curve K, Electromechanic Tripping Mechanism for Short Circuit Protection, Voltage up to 277/Y480 VAC, DIN Rail Mounted, Finger Safe and Multi-Function Terminals, UL 489, CSA 22.2 No. 5

Interruttori automatici a bassa tensione Siemens per applicazioni residenziali Interruttori principali - Gli interruttori principali non reversibili sono dispositivi di protezione circuitale per centri di carico, linee di alimentazione e interruttori automatici miniaturizzati. Tipo: QNH Applicazione: Distribuzione elettrica Standard: UL 489 Tensione Nominale: 120/240V Corrente Nominale: 200A Gamma di scatto: Termico Magnetico Interruttore Nominale: 22 AIC Numero di poli: 2P

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

The High Performance Miniature Circuit Breaker is designed for branch circuit protection. It features a rated current of 6 Amps, ensuring efficient power distribution. The device has a thermal magnetic trip curve Z, which enhances its safety and reliability. It can handle voltages up to 240 VAC, making it suitable for various applications. Mounted on a DIN rail, this circuit breaker is compact and easy to install. Its finger-safe design and multi-function terminals ensure safe operation. This product complies with UL 489 and CSA 22.2 No. 5 standards, ensuring its quality and safety.

System pro M compact S200P miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 25 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200P comply with IEC/EN 60898-1, IEC/EN 609 47-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200P to save 50% space.