Quadri di baixa tensione

This is a high-quality miniature circuit breaker designed to provide protection in various applications. It is UL1077 rated, making it suitable for use in North America. The circuit breaker features three poles and has a current rating of 32A, making it ideal for applications requiring high current protection.The breaker operates at a voltage of 480VAC and is equipped with a trip characteristic curve A, which ensures reliable operation under various conditions. The dimensions of the circuit breaker are 54mm in width and 70mm in depth, making it compact and suitable for installation in tight spaces.This miniature circuit breaker is designed to meet the highest safety standards and is backed by a UL file E116386 in Vol. 1 Sec. 2. It is a reliable solution for protecting electrical circuits from overcurrent conditions, short circuits, and other faults.

1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.

The contactor features a 4-pole configuration (4NO) suitable for controlling non-inductive loads at a maximum of 20A and 690V in AC-1 applications. It operates with a 12V DC coil and is equipped with screw clamp terminals for reliable electrical connections. With dimensions of 45mm in width, it supports both DIN-rail mounting and screw fixing, allowing for versatile installation.Designed for environments with operational temperatures ranging from -25°C to 50°C, it can handle up to 600 cycles per hour. The product's durability is underscored by a mechanical lifespan of 10 million cycles and an electrical durability of 0.16 million cycles at 20A AC-1. The rated insulation voltage is 600V according to UL 508 standards and 690V per IEC 60947-4-1 standards.This contactor adheres to multiple international standards, including IEC, UL, CSA, and others, ensuring compliance and reliability in various applications. It is also Green Premium compliant, indicating its environmentally friendly design.

The 3VA10 circuit breaker is designed for low voltage applications and is equipped with a thermal-magnetic trip unit. It operates with a 3-pole configuration, providing a rated permanent current of 63A. The rated short-circuit breaking capacity is 16kA at 415V, ensuring reliable protection in various electrical environments.Constructed with a Class B breaking capacity, this unit features a fixed overload protection setting of Ir=63A and a short-circuit protection setting of Ii=10 x In. It includes a connection with a lug terminal and nut keeper, optimizing installation flexibility.Dimensions for this device are 3 x 5.1 x 3.5 inches. The circuit breaker is not suitable for DIN rail mounting and has a degree of protection rated at IP40, making it suitable for indoor applications.

The Miniature Circuit Breaker operates at a rated current of 63 A and features a tripping characteristic of K, making it suitable for various applications, including residential and industrial environments. Compliance with IEC/EN 60898-1 and IEC/EN 60947-2 standards ensures reliability and safety.With a compact design, it measures 17.5 mm in width and provides flexibility in mounting, as it is compatible with DIN-Rail systems. The device supports operational voltages up to 230/400 V AC and offers a breaking capacity of up to 6 kA. The ability to mount auxiliary contacts allows for space-saving configurations.Environmental durability is enhanced by a temperature range of -25 to +55 °C for operation and -40 to +70 °C for storage. The device also meets stringent environmental standards, with a recyclability rate of 80.7% according to EN45555 and provisions for take-back services for recycling.In terms of electrical endurance, it withstands 10,000 AC cycles and 20,000 mechanical cycles, with an overvoltage category of III and a dielectric test voltage of 2 kV. The product's compact footprint and robust features make it a suitable choice for diverse installation scenarios.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 2.06 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The circuit breaker is part of the 3VA22 frame series, specifically designed for line protection with a rated current of 250A. It operates at a rated voltage of 690V, offering a medium breaking capacity classified as Class M. The device includes an ETU330 electronic trip unit, which provides overload protection adjustable from 100A to 250A and short-circuit protection with a setting range of 1.5 to 10 times the rated current.Notably, the device features integrated earth fault protection, ensuring enhanced safety. It is suitable for DIN rail mounting and has a degree of protection rated at IP40. The dimensions of the circuit breaker are 5.5 inches in width, 7.1 inches in height, and 4.2 inches in depth. The front-side connection is secured using a screw connection, and the design includes a special nut keeper for connection stability.This circuit breaker also supports an adjustable N conductor protection setting and is built to meet rigorous standards for low voltage applications.

The S203M-Z32 miniature circuit breaker features a current limiting design with two distinct tripping mechanisms: a delayed thermal mechanism for overload protection and an electromechanical mechanism for short circuit protection. It supports a rated operational voltage of 400 V AC according to IEC 60898-1 and 440 V AC as per IEC 60947-2. With a breaking capacity of up to 10 kA at 230/400 V AC, it is suitable for diverse applications including residential, commercial, and industrial settings.This model is constructed to fit on DIN rails (TH35-15 and TH35-7.5) and has a compact design with a width of 52.5 mm and a height of 88 mm, allowing for efficient space utilization. The tripping characteristic is classified as Z, making it ideal for specific load types. Furthermore, the device's environmental credentials include a recyclability rate of 80.7% and compliance with various environmental standards, enhancing its sustainability profile.The S203M-Z32 is rated for an operational temperature range of -25 to +55 °C and offers a degree of protection rated at IP20, with an enclosure cover reaching IP40. Its robust mechanical endurance is rated for 20,000 cycles, ensuring reliable long-term performance. This circuit breaker is designed for easy installation and includes a failsafe bi-directional cylinder-lift terminal for secure connections.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The basic switch for position switch applications, designated as 3SE51, features a metal enclosure measuring 40 mm in width and conforms to EN 50041 standards. It includes 1 normally open and 1 normally closed slow-action contact, equipped with a 5-pole M12 connector. The fixed pin assignment consists of PIN1=21, PIN2=22, PIN3=13, PIN4=14, and PIN5=PE. Notably, this switch does not come with an actuator head.With a height of 37.3 mm and a length of 99.7 mm, this device ensures forced opening and is constructed from lacquered metal, providing durability. It operates effectively in environments with temperatures ranging from -25 °C and has a degree of protection rated at IP66/IP67, making it suitable for various applications including safety functions. The switch incorporates a cuboid housing design and does not feature a status indication or interface for safety communication.

This Harmony 9001K, modular black push button has 2 positions, operates with spring return mechanism. It has a chromium-plated metal bezel, a round shape and 57mm mushroom head and 1 x NO + 1 x NC contacts. This 57mm mushroom shaped push button head is ideal for situations where quick actions are required for a process or machine to function correctly or where operator movements require maximum ergonomy. It is easily combined with Harmony range of contact blocks to perform a large variety of control functions. It is clearly distinguishable visually at a distance thanks to a prominent mushroom shape. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66, making it ideal for operation in harsh environments. Impact and corrosion resistant metal bezel and body ensures product continues to operate even after severe accidents.

The Siemens MSP S0 Circuit Breaker is a reliable solution for motor protection, classified as Class 10. It offers an A-release of 2.2-3.2A and an N-release of 42A, ensuring optimal performance in various applications.Featuring a Spring Loaded Terminal, this circuit breaker provides a standard switching capacity with transverse auxiliary switches, offering both Normally Open (1NO) and Normally Closed (1NC) configurations. This versatile design allows for seamless integration into diverse systems.

These accessories are cable memory kit for TeSys Giga 265-500 contactor. It is used to 4 Poles electrical circuit. To be used to hold cables in place when replacing contactor, making reinstallation faster and easier. It can cover -25°C to 60°C operation ambient air temperature, No derating up to 3000m altitude. Green Premium compliant (RoHs/Reach).

SIEMENS BASSA TENSIONE 3VA IEC INTERRUTTORE AUTOMATICO CON UNITÀ DI SCATTO TERMOMAGNETICO. FRAME 3VA12 CON CAPACITÀ DI INTERRUZIONE STANDARD (CLASSE S). 250A 4 POLI Icu: (7KAIC A 690V) (36KAIC A 415V). UNITÀ DI SCATTO TM240 CON Ir REGOLABILE Ii REGOLABILE PROTEZIONE NEUTRALE AL 50%. CARATTERISTICHE SPECIALI: CONNESSIONE CON TERMINALE A MORSOTTO / PROTEZIONE DADO. DIMENSIONI (L x A x P) IN: 5.5 x 6.2 x 3.5.

Safety relay for SIL 3 high- and low-demand applications, also approved in accordance with EN 50156, Germanischer Lloyd, and EN ISO 13849, emergency stop and safety door monitoring, 1-channel, 2 enabling current paths, 1 signal contact, plug-in screw terminal blocks, width: 22.5 mm

The slim interface plug-in relay offers a coil control voltage of 60V DC and is equipped with a single changeover contact (SPDT) rated at 6A. Its compact design, measuring only 5 mm in width, allows for versatile installation in confined spaces, enhancing design flexibility.Built to operate effectively in temperatures ranging from -40 to 55 °C, this relay maintains high reliability even under challenging conditions. It is capable of withstanding shocks of up to 5 gn for both operational and non-operational states, adhering to IEC 60068-2-27 standards. The dielectric strength is rated at 1000 V AC between contacts and 4000 V AC between coil and contact, ensuring safe operation.Designed for compatibility with high breaking capacity and low-level current applications, this relay suits a variety of control systems, including hard-wired logic automated systems and industrial programmable logic controllers (PLCs). The device's LED status display provides clear visibility of operational status in both day and night conditions.This relay adheres to multiple certifications, including CSA, UL, and EAC, and complies with standards such as CSA C22.2 No 14 and UL 508. With a mechanical durability rated at 10 million cycles and an electrical durability of 60,000 cycles at 6A and 250V AC, this relay ensures long-lasting performance.

The Solid-state relay module PLC-OSC-48DC/100 is an integral component in the realm of industrial automation. This module is designed to interface with a PLC (Programmable Logic Controller) and facilitate communication between various devices, such as sensors or actuators. The module features a PLC-BSC.../21 basic terminal block with screw connection for easy wiring. It also includes a plug-in miniature solid-state relay that ensures reliable and efficient operation. This relay is designed to handle an input of 48 V DC and provide an output of up to 3 - 48 V DC/100 mA. The module is compact and lightweight, making it ideal for mounting on DIN rail NS 35/7.5. It offers a single N/O contact, allowing for seamless integration with other devices in the system.

The 3VA20 3P 25A 150KA ETU8-LSIG BOX is a low voltage molded case circuit breaker designed according to IEC standards. This device features a 3-pole configuration and offers a remarkably high breaking capacity, classified as Class L. The circuit breaker has a rated current of 25A and can withstand a short-circuit breaking capacity of 150kA at 415V, ensuring robust performance in various applications. Equipped with the ETU860 electronic trip unit, it provides comprehensive line protection, including overload and short-circuit protection. The adjustment range for short-circuit release is set to accommodate settings from 10A to 25A for overload and from 0.6 to 10 times the rated current for short-circuit protection. Additionally, the unit has integrated earth fault protection, further enhancing its safety features. Constructed for ease of installation, this breaker supports connection via a box terminal and features a steel wrap-around lug. Its dimensions measure 4.1 inches in width, 7.1 inches in height, and 4.2 inches in depth, making it compatible with various mounting configurations, including DIN rail options. The degree of protection is rated at IP40, suitable for indoor applications.

Introducing the ABB SSR32, a robust safety relay designed to meet the highest standards of industrial safety. This device features 2 Normally Open (NO) contacts and 2 Delayed Normally Open (DNO) contacts, providing reliable protection in various applications.Powered by a +24 VDC supply voltage, the SSR32 is designed for compatibility with a wide range of systems. Its compact size and robust construction make it an ideal choice for installations where space is at a premium.

CLIENTE IWLAN, SCALANCE W722-1 RJ45, PER USO AL DI FUORI DEGLI USA, 1 RADIO, 1 CONNESSIONE ANTENNA R-SMA, IFEATURES (IPCF) IEEE 802.11A/B/G/H/N, 2.4/5GHZ, VELOCITÀ DATI LORDA 150 MBIT/S, 1 X RJ45 (MAX. 100 MBIT/S), 1X24VDC, IP20, SI PREGA DI NOTARE LE APPROVAZIONI NAZIONALI. CONTENUTO FORNITURA: MANUALI SU CD ROM, TEDESCO / INGLESE, 1 X BLOCCO TERMINALE