Quadri elettrici e alimentazione

Presentazione dell'avviatore manuale e della protezione Schneider Electric GV2P32, una soluzione versatile progettata per fornire una protezione completa per i sistemi elettrici. Questo avviatore e protezione manuale offre una gamma di funzionalità, tra cui l'isolamento manuale, il controllo del motore e la protezione da sovracorrente termica, il tutto all'interno di un'unica unità compatta. Il GV2P32 è dotato di una maniglia rotante per un facile utilizzo, che lo rende la scelta ideale per le applicazioni in cui è richiesto l'intervento manuale.Il design a tre poli del dispositivo e i valori nominali di potenza garantiscono un controllo affidabile del motore, in grado di gestire correnti a pieno carico fino a 32 A. Il GV2P32 è inoltre dotato di un sistema di protezione da sovracorrente termica con compensazione ambientale di Classe 10, regolabile da 24 ampere a 32 ampere. Questa funzione consente un controllo preciso e la personalizzazione dei livelli di protezione dei sistemi elettrici.Il dispositivo viene fornito con terminali con morsetto a vite per un collegamento sicuro ed è stato certificato secondo diversi standard internazionali tra cui IEC, UL, CSA, CCC, EAC, Marine e ATEX. È inoltre conforme a Green Premium, aderendo alle direttive RoHS/REACh.

TeSys LRD overload relays are designed to be used with TeSys D contactors to make a motor starter. This overload relay can be used with 9 amp through 38 amp TeSys D contactors. These differential thermal overload relays detect over currents in the lines to the motor. When an overcurrent is detected the overload relay working with the contactor will disconnect the power to the motor. This will minimize the damage to the motor windings. This overload relay has an adjustable trip current rating of 1.6 to 2.5 amperes. This trip current rating is calibrated per Class 10A. Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

The SCALANCE X204RNA EEC is designed for redundant network access in HASAR networks. It boasts 2x 100 Mbit/s RJ45 ports and 2x 100 Mbit/s combo-ports, ensuring seamless connectivity. The device comes equipped with LED diagnostics for easy troubleshooting and a fault signal contact with set pushbutton for error signaling.The SCALANCE X204RNA EEC also features a simple power supply and network management capabilities. It includes an electronic manual on CD-ROM, making it convenient for users to access important documentation. Additionally, the C-PLUG option is available for HSR networks.

La resistenza di frenatura Schneider Electric è un componente essenziale per ottimizzare le prestazioni dei sistemi di azionamento. Progettato per funzionare durante la frenatura fino all'arresto o al rallentamento, questo resistore dissipa efficacemente l'energia di frenatura, consentendo la massima coppia di frenatura transitoria. Con un valore ohmico di 100 Ohm e una potenza nominale di 100 W, garantisce un funzionamento affidabile ed efficiente.Dotato di una struttura robusta con un indice di protezione IP65, questo resistore di frenatura è costruito per resistere ad ambienti difficili. La lunghezza del cavo di 3 metri offre flessibilità nell'installazione ed è specificamente progettato per essere montato all'esterno del contenitore, garantendo un facile accesso e manutenzione.Compatibile con la macchina Altivar ATV320, questa resistenza di frenatura è una soluzione versatile per varie applicazioni industriali. Con un peso di soli 0,76 kg, è leggero ma resistente, il che lo rende la scelta ideale per migliorare le prestazioni di frenata dei sistemi di trasmissione.

L'interruttore automatico Siemens SUP PTOR 5SY4 2P 480V 25A 5K C-TRIP è un interruttore automatico miniaturizzato ad alte prestazioni progettato per una protezione affidabile in varie applicazioni industriali e infrastrutturali. Con un design robusto e una capacità di interruzione di 10kA secondo EN 60898, questo interruttore automatico garantisce sicurezza e prestazioni ottimali. Il dispositivo è dotato di una caratteristica di sgancio a C, che lo rende adatto per la protezione di circuiti con correnti di spunto moderate.Progettato per durare nel tempo, l'interruttore automatico vanta una durata utile meccanica fino a 10.000 cicli di funzionamento. Supporta sia il funzionamento monofase che multifase con una tensione di isolamento di 440V. L'interruttore è conforme agli standard IEC 60947-2 e EN 60898, garantendo che soddisfi rigorosi criteri di sicurezza e prestazioni.Altre caratteristiche includono la protezione dal contatto, la struttura priva di alogeni e silicone e la possibilità di installare dispositivi supplementari. Il dispositivo è progettato per una facile installazione su guide DIN e può essere montato in qualsiasi posizione. Supporta inoltre un'ampia gamma di sezioni trasversali dei conduttori, il che lo rende versatile per varie configurazioni di cablaggio.Le applicazioni di questo interruttore automatico includono pannelli di controllo industriali, sistemi di distribuzione elettrica e progetti infrastrutturali in cui è essenziale una protezione affidabile dei circuiti.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LRD03 is a TeSys LRD thermal overload relay from Schneider Electric to be used with a TeSys D contactor. It protects motors 0.06-0.09kW@400V thanks to a thermal range 0.25-0.40A, a tripping class 10A and phase unbalance protection. LRD03 is a TeSys LRD thermal overload relay from Schneider Electric for direct mounting on TeSys D contactors. With a thermal setting range 0.25-0.40A, a tripping class 10A and phase unbalance detection, it protects motors 0.06-0.09kW@400V. It provides manual test & reset buttons, automatic reset, trip auxiliary contact and flag indicator. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Thermal overload protection relay, bimetallic type, with phase unbalance protection (differential). Direct mounting on the bottom terminals of a Tesys contactor LC1D09-D38 to form a compact starter. Light and compact, 45mm wide. Temperature compensated for a good accuracy of the protection. Manual control with test & reset buttons, manual / automatic reset selector. Trip signaling with 1NO+1NC auxiliary contacts and trip flag indicator. Can be completed with terminal blocks for separate mounting (LAD7B, LAD96) and remote control devices (LAD703, LA7D03).

The plug-in relay operates at a coil control voltage of 230V AC and includes 2 changeover contacts (DPDT) with a current rating of 15A. It is designed with an LED indicator that provides a clear status display, facilitating monitoring in various lighting conditions. This model is compliant with IP40 standards, ensuring protection against solid objects greater than 1 mm.With a wide operational temperature range of -40 to 55 °C, the relay maintains functionality in extreme conditions. It features a lockable test button for enhanced control during testing and maintenance. The electrical durability is rated for up to 100,000 cycles under resistive load, while the mechanical durability extends to 10 million cycles. This reliability supports integration into hard-wired logic automated systems and enhances the efficiency of industrial programmable logic controllers (PLCs).The relay's dielectric strength is impressive, rated at 1500 V AC between contacts and 2000 V AC between the coil and contacts. It also meets various safety and environmental standards, including CSA, UL, and IEC certifications, making it suitable for diverse industrial applications. The status LED is particularly effective for signaling operational status day and night, ensuring that users can easily monitor relay conditions.

TeSys D reversing contactor, 3 poles (3NO), for motor control applications up to 18A/690V AC-3 (7.5kW@400V). It provides low consumption 24V DC coils with transient suppressor module, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys U standard control unit to be inserted in power bases LUB12, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 0.25kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 24V AC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The standard control unit is a crucial component for creating a TeSys U starter controller when integrated into LUB32 or LUB38 power bases. This unit supports 3-phase motor applications with a maximum operational power of 7.5kW at 400V.It offers adjustable overload protection within a current range of 4.5A to 18A, with thermal tripping classified under class 10. The device is capable of handling short-circuit scenarios at 13 times the maximum rated current and overcurrent situations at 14.2 times the rated current. Additionally, it provides phase loss and insulation fault protection, ensuring comprehensive safety for motor operations.Designed to operate within a voltage range of 48V AC and 48-72V DC for control functions, this control unit is compliant with various international standards including IEC, UL, and CSA, and is certified for use in marine environments. The unit’s operational temperature ranges from -25°C to 70°C, making it suitable for diverse industrial conditions.With an IP20 rating for the front panel and wired terminals, and IP40 for the connection zone, this unit is built to withstand various environmental factors. Notably, it is compliant with Green Premium standards, indicating its sustainability in terms of materials and design, including being halogen-free and PVC-free.

The SIRIUS Soft Starter is a robust solution designed to handle the demands of industrial environments. With a rating of 36A and 18.5kW, it provides efficient and reliable operation at 400V and 40°C. The soft starter features screw terminals for easy connection, making it compatible with a wide range of applications from 200-460V AC to 230V AC. This model is no longer available. We recommend the SIRIUS 3RW5 as its successor. The preferred type is SIRIUS 3RW5517-1HA14 for optimal performance and compatibility.

Designed for versatility, the Relay DRW370024LT includes three change-over (CO) contacts equipped with a lockable test button, constructed from AgCdO. With a rated control voltage of 24 V DC, this relay supports a continuous current of 16 A, making it suitable for various applications. The relay incorporates flat blade connections measuring 4.8 mm x 0.5 mm for streamlined wiring. The unit's dimensions are compact at 36 mm x 36 mm x 48 mm, and it weighs 85.1 g. Notably, it features a mechanical service life of up to 10 million switching cycles and a contact resistance of ≤ 50 mΩ. For operational reliability, the relay's rated switching voltage reaches 400 VAC, with a maximum switching voltage of 400 V AC and 250 V DC. It exhibits an inrush current of 80 A for 50 ms and can handle an AC switching capacity of up to 6400 VA. The switching frequency can reach 1 Hz at rated load. Environmental compliance is ensured with approvals such as CE, cURus, and EAC, and it adheres to standards like IEC 61810-1 and EN 60664-1. The relay operates effectively within a temperature range of -40 °C to 60 °C and a relative humidity of 35% to 85%. Its protection degree is rated at IP20, ensuring adequate insulation and durability.

Introducing the ABB SSR32, a robust safety relay designed to meet the highest standards of industrial safety. This device features 2 Normally Open (NO) contacts and 2 Delayed Normally Open (DNO) contacts, providing reliable protection in various applications.Powered by a +24 VDC supply voltage, the SSR32 is designed for compatibility with a wide range of systems. Its compact size and robust construction make it an ideal choice for installations where space is at a premium.

TeSys K control relay, 4 contacts (4NO), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V DC control circuit with no inrush consumption, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

The Altivar Machine ATV320 range offers highly compact and robust variable speed drives (VSDs) specifically engineered for Original Equipment Manufacturers (OEMs). Its innovative compact form factor enables efficient vertical stacking of drives within machine frames, maximizing space utilization in control cabinets. This VSD operates with a rated power of up to 5.5kW (7.5hp) and is compatible with a rated voltage range from 380V to 500V AC.

The contactor features three poles (3NO) and is rated for 265A under AC-3 utilization category, making it suitable for motor applications up to 132kW at 400V. It operates with a control circuit voltage of 240V AC at a frequency range of 40-400Hz.Designed to handle high operational rates of up to 2400 cycles per hour and endure ambient temperatures up to 55°C, this device ensures reliability in demanding environments. The installation is facilitated by a drawer-mounted coil, complemented by a variety of add-on blocks and accessories which are sold separately. The product is compliant with multiple international standards including IEC, UL, CSA, and others, and adheres to Green Premium guidelines regarding environmental impact.

Solid State Contactor,SIRIUS SC 1 Pole 20 Amps at 24 VAC to 230 VAC 24 VDC Coil DIN Rail or Panel Mount Spring-loaded Terminals 22.5 mm Relay Width 22.5mm Heat Sink Width Zero-Point Switching UL File E143112 in Vol.1 Sec.8

This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 7.5kW / 10hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. This drive features multi-protocol Ethernet embedded, it consists of Ethernet IP and Modbus TCP communication interfaces. it weighs 3kg and its dimensions are, 110mm wide, 270mm high, 234mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS relating to environmental protection.

Harmony 22 mm modular push buttons, selector switches, pilot lights are designed for industry. This range combines simplicity of setup, flexibility and a robust construction. An ingenious locking system consisting of a snap fit head and body that can be tightened with a single screw but still ensuring an easy and yet secure mounting. Harmony XB4/ZB4 are 22 mm chromium plated metal modular push buttons, selector switches and pilot lights connecting to fully metal mounting collar. The operators can be purchased as complete operators or various modules that can be assembled to meet the user’s specific requirement. Harmony XB5/ZB5 are 22 mm plastic modular push buttons, selector switches, pilot lights. The operator can have a round and square plastic bezel. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66 / IP67 / IP69 / IP69K, making it ideal for operation in harsh environments. The contacts can be used for low load electrical contact and high power applications. Shake proof connection screws make periodic retightening unnecessary. A complete set of accessories to provide a solution for applications where exposure to high pressure cleaning, dust and extreme temperatures is an everyday occurrence. These harmony 22mm push buttons are used by machine manufacturers (automotive, textiles, timber) and control system panel builders. Certified and approved for meeting requirements throughout all continents: EN/IEC, UL, NEMA, CSA, CCC, Gost, JIS and many more. They have UL and CE markings and have ratings up to IP66 and IP69K.