Bosch Rexroth Ricambi per Automazione Industriale

STRUT PROFILE 15X40L

Function-integrated profile 120x120 6N -/- - Construction profiles with usable interior space for guiding cables and hoses - 2 parts (profile and cover) - Cover with hinge function on both sides - Concealed 10 mm groove for mounting socket strips or installation elements - Screw holes for mounting cover plates - Closed exterior - Mount for dividing strips and grounding cables - Mount for potential equalizer

The section is used to construct conveyor units with plastic flat-top chains in connection with the drive modules AS 2/C-... and return units UM 2/C-... - For conveyor unit self-assembly - For use in conjunction with all drive modules AS 2/C-... and return units UM 2/C... - Conveyor medium plastic flat top chain - GP 2 plastic glide profiles - Pre-assembled unit for quick setup - The WT 2/LS can be used for longitudinal conveyors with this component - It is not possible to cross over

Function-integrated profile 120x120 6N M12/- - Construction profiles with usable interior space for guiding cables and hoses - 2 parts (profile and cover) - Cover with hinge function on both sides - Concealed 10 mm groove for mounting socket strips or installation elements - Screw holes for mounting cover plates - Closed exterior - Mount for dividing strips and grounding cables - Mount for potential equalizer

Frame profile 22.5x45 machined for direct field version left side - For the low-cost assembly of protective frame with weld grille, woven wire grille WG40 or panel elements - Fastening of spot welding and woven wire grilles: Directly in the special profile slot - Fastening of panel elements: In the special profile slot using clamping profile (accessories)

Frame profile 22.5x45, length configurable - For the low-cost assembly of protective frame with weld grille, woven wire grille WG40 or panel elements - Fastening of spot welding and woven wire grilles: Directly in the special profile slot - Fastening of panel elements: In the special profile slot using clamping profile (accessories)

Frame profile 45x45, length configurable - For the low-cost assembly of protective frame with weld grille, woven wire grille WG40 or panel elements - Used for horizontal or vertical reinforcement of safety fence panels made of frame profiles 22.5x45 - Fastening of spot welding and woven wire grilles: Directly in the special profile slot - Fastening of panel elements: In the special profile slot using clamping profile (accessories)

Frame profile 22.5x45 machined for direct field version right side - For the low-cost assembly of protective frame with weld grille, woven wire grille WG40 or panel elements - Fastening of spot welding and woven wire grilles: Directly in the special profile slot - Fastening of panel elements: In the special profile slot using clamping profile (accessories)

Frame profile 22.5x45 machined for suspension field - For the low-cost assembly of protective frame with weld grille, woven wire grille WG40 or panel elements - Fastening of spot welding and woven wire grilles: Directly in the special profile slot - Fastening of panel elements: In the special profile slot using clamping profile (accessories)

Direct field configurable - Protective frame made of frame profile 22.5x45 with spot-weld wire grille 40x40x3.8 for direct fields - Protective frame completely mounted - Individual dimensions and colors (galvanized, yellow, black) configurable - Color-coated grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to leg sets 22.5x45 (outer dimension) - Easy installation via the foot. Single fitter is sufficient

Suspension field, horizontal sections configurable - Protective frame made of frame profile 22.5x45 with spot-weld wire grille 40x40x3.8 for suspension fields - Suitable kits enable the construction of doors (system doors, sliding doors, double doors) - Protective frame completely mounted - Simple mounting on the supports using the suspension brackets. Single fitter is sufficient - Individual dimensions and colors (galvanized, yellow, black) configurable - Horizontally divided protective frames provide additional stability for large surfaces - Color-coated grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to leg sets 45x45 (center of leg set)

Suspension field, vertical sections configurable - Protective frame made of frame profile 22.5x45 with spot-weld wire grille 40x40x3.8 for suspension fields - Suitable kits enable the construction of doors (system doors, sliding doors, double doors) - Protective frame completely mounted - Simple mounting on the supports using the suspension brackets. Single fitter is sufficient - Standard dimension for safety fence field with H=2000 mm with 150 mm ground clearance - Vertically divided protective frames provide additional stability for large surfaces - Color-coated grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to leg sets 45x45 (center of leg set)

Suspension field configurable - Protective frame made of frame profile 22.5x45 with spot-weld wire grille 40x40x3.8 for suspension fields - Suitable kits enable the construction of doors (system doors, sliding doors, double doors) - Without pitch - Protective frame completely mounted - Simple mounting on the supports using the suspension brackets. Single fitter is sufficient - Individual dimensions and colors (galvanized, yellow, black) configurable - Color-coated grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to leg sets 45x45 (center of leg set)

Direct field, horizontal sections configurable - Protective frame made of frame profile 22.5x45 with spot-weld wire grille 40x40x3.8 for direct fields - Protective frame completely mounted - Individual dimensions and colors (galvanized, yellow, black) configurable - Horizontally divided protective frames provide additional stability for large surfaces - Color-coated grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to leg sets 22.5x45 (outer dimension) - Easy installation via the foot. Single fitter is sufficient

The drive kit is designed to operate the basic head drive units. The drive kit contains a flange for attaching the motor to the basic unit, a hexagonal shaft for transmission of force, as well as other optional equipment features. - Fixed or adjustable speed (vN). For an adjustable speed, gear motors must be retrofitted with an FU (frequency converter) - Connections are made using terminal boxes (AT = K) or plugs (AT = S) - With Lenze gear motor (GM = 1, without surface and corrosion protection) or with an interface for attaching an SEW SA47 gear motor (GM = 2). An adaptation by the customer is required for attaching other gear motors (GM = 0).

Round tube D28L, variable length L50-6070 - With 4 interfaces for connection of EcoShape connectors - The tubes and connectors are ideally suited for long-term use and for reuse

Protective fence, vertical sections B500…3000 - Protective frame made of protective grille profile 30x30 WG40 with woven wire grille 40x40x4 - Suitable kits enable the construction of doors (system doors, sliding doors, double doors) - Fully assembled on delivery - Simple mounting on the supports using the suspension brackets. Single fitter is sufficient - Standard widths or customized dimensions - Horizontally or vertically divided protective frames provide additional stability for large surfaces - Color-coated woven wire grilles improve visual contrast in the protected area and facilitate recognition of access routes and emergency exit routes - Modular dimension "B" relates to 45x45 supports

Synchronous shaft LF6 - Allow several linear guides to be operated synchronously while being driven by a common motor - The synchronous shaft can be replaced without the drive heads having to be disassembled

U-profile, L50-6000 ESD - Profiles which are normally used to construct TS 2plus and TS 4 transfer systems and lean conveyor tracks are also suitable for the construction of manual conveyor sections. Detailed information can be found in chapter 12 “Elements for manual movement” and in the respective special catalogs