Bosch Rexroth Ricambi per Automazione Industriale

Belt section CSS/F-4 - Conveyor medium with high friction coefficient allows high acceleration and deceleration - No slipping of the modules on the belt section - Same system dimensions as CSS/B - Longitudinal conveyor for glass modules of various dimensions - Not intended for accumulation operation - Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg‒ Per belt section: max. 120 kg - Suitable for reversible operation (up to 3000 mm) - Textile toothed belt with PU coating for high friction coefficients and improved static friction when starting and accelerating - Simple exchange of the toothed belts by dismantling from above without realignment - Gear motors are suitable for operation with frequency converter - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 5; MS = 1 denotes the left track in the direction of transport). When mounting the motor between the tracks, observe a minimum distance of 165 mm (b1 to b4) - Motor mounting outside: suspended or lying down;Motor mounting between the tracks: suspended - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) - Version with lateral guide (FP = 1) preferably for fully framed glass modules; version without lateral guide (FP = 0) preferably for unprocessed glass modules with rough edges - Suitable for use in cleanroom environments up to cleanroom class 6 in accordance with ISO 14644-1

Belt section CSS/F-2 - Conveyor medium with high friction coefficient allows high acceleration and deceleration - No slipping of the modules on the belt section - Same system dimensions as CSS/B - Longitudinal conveyor for glass modules of various dimensions - Not intended for accumulation operation - Belt section consisting of two to five tracks for secure support of the glass modules across the entire width. Distance between the tracks can be determined individually (b1 to b4). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg‒ Per belt section: max. 120 kg - Suitable for reversible operation (up to 3000 mm) - Textile toothed belt with PU coating for high friction coefficients and improved static friction when starting and accelerating - Simple exchange of the toothed belts by dismantling from above without realignment - Gear motors are suitable for operation with frequency converter - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 5; MS = 1 denotes the left track in the direction of transport). When mounting the motor between the tracks, observe a minimum distance of 165 mm (b1 to b4) - Motor mounting outside: suspended or lying down;Motor mounting between the tracks: suspended - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) - Version with lateral guide (FP = 1) preferably for fully framed glass modules; version without lateral guide (FP = 0) preferably for unprocessed glass modules with rough edges - Suitable for use in cleanroom environments up to cleanroom class 6 in accordance with ISO 14644-1

Lift transverse unit LTS/F-2 - Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right-angled section branches - Version with two to four tracks. Distance between the tracks can be determined individually (b1 to b3). Comply with minimum dimensions - Permissible load:‒ Per track: max. 0.15 kg/cm support surface length and max. 40 kg for LTS/F,max. 60 kg for LTS/B ‒ Per belt section: max. 120 kg - O-rings for high friction coefficients and improved static friction for transverse conveyor - Tracks without lateral guide - Reversible across the entire value range - Simple exchange of the toothed belts - Gear motors are suitable for operation with frequency converter - Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 4; MS = 1 denotes the left track in the direction of transport) - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) - Two lift positions

Static friction chain VFplus 90, AZ=2-84 - The static friction chain enables the transport of products on ascending or descending sections. The number of chain links with static friction lining can be specified by the user depending on the product size, weight and the inclination. - Transport on uphill or downhill gradients up to about 30° possible. Maximum gradient depends on the product surface, section length, and speed (test required) - Accumulation operation not permitted - From size 160: Chain plate easy to replace - Only suitable for dry operation - AZ ≥ 2: Static friction chain supplemented with flat conveyor chain links (AZ = spacing distance) AZ = 1: All chain links with static friction coating - The grip is maintained through regular cleaning - The chain coating is not suitable for transporting sharp-edged objects - Extremely quiet chain running thanks to the patented chain design - Large-area static friction lining for secure product transport

Static friction chain VFplus 120, AZ=2-84 - The static friction chain enables the transport of products on ascending or descending sections. The number of chain links with static friction lining can be specified by the user depending on the product size, weight and the inclination. - Transport on uphill or downhill gradients up to about 30° possible. Maximum gradient depends on the product surface, section length, and speed (test required) - Accumulation operation not permitted - From size 160: Chain plate easy to replace - Only suitable for dry operation - AZ ≥ 2: Static friction chain supplemented with flat conveyor chain links (AZ = spacing distance) AZ = 1: All chain links with static friction coating - The grip is maintained through regular cleaning - The chain coating is not suitable for transporting sharp-edged objects - Extremely quiet chain running thanks to the patented chain design - Large-area static friction lining for secure product transport

Universal chain VFplus 120, AZ=1-84 - Substructure for the assembly of customer-specific cleats or fixtures

Universal chain VFplus 90, AZ=1-84 - Substructure for the assembly of customer-specific cleats or fixtures

Cleated chain VFplus 65, AZ=2-84 - Enables the transport of products on ascending or descending sections

Static friction chain VFplus 65, AZ=2-84 - The static friction chain enables the transport of products on ascending or descending sections. The number of chain links with static friction lining can be specified by the user depending on the product size, weight and the inclination. - Transport on uphill or downhill gradients up to about 30° possible. Maximum gradient depends on the product surface, section length, and speed (test required) - Accumulation operation not permitted - From size 160: Chain plate easy to replace - Only suitable for dry operation - AZ ≥ 2: Static friction chain supplemented with flat conveyor chain links (AZ = spacing distance) AZ = 1: All chain links with static friction coating - The grip is maintained through regular cleaning - The chain coating is not suitable for transporting sharp-edged objects - Extremely quiet chain running thanks to the patented chain design - Large-area static friction lining for secure product transport

Universal chain VFplus 65, AZ=1-84 - Substructure for the assembly of customer-specific cleats or fixtures

Cleated chain VFplus 90, AZ=2-84 - Enables the transport of products on ascending or descending sections

Roller cleated chain D20 VFplus 90, AZ=2-84 - Enables the transport of products on ascending or descending sections

Roller cleated chain D20 VFplus 65, AZ=2-84 - Enables the transport of products on ascending or descending sections

DA 2/100-H Damper - For permitted total weight of workpiece pallets up to 100 kg - Pneumatic damper - Infinitely adjustable - Installation location: HQ 2/C-H lift transverse unit - Can be combined with WT 22/H and WT 2/F-H - The damper cushions the impact of the arriving workpiece pallets when they are moved from a transverse section into a longitudinal section and vice versa - The pneumatic return occurs as the stop gate opens, which permits the workpiece pallet to move toward the damper - For installation in a lift transverse unit HQ 2/C-H - The damper is traversable

DA 2/250-H Damper - For permitted total weight of workpiece pallets up to 250 kg - Pneumatic damper - Infinitely adjustable - Installation location: HQ 2/C-H lift transverse unit - Can be combined with WT 22/H and WT 2/F-H - Notice: Combination with WT 2/LS not possible - The damper cushions the impact of the arriving workpiece pallets when they are moved from a transverse section into a longitudinal section and vice versa - The pneumatic return occurs as the stop gate opens, which permits the workpiece pallet to move toward the damper - For installation in a lift transverse unit HQ 2/C-H - The damper is traversable

Dampened stopping of the first accumulating workpiece pallet VE 2/D100-H Stop Gate - Pneumatic stop gate - For central separation of WT 2/H and WT 2/F-H workpiece pallets - Suitable for accumulation loads up to 1000 kg - Infinitely adjustable damping - Optimal damping for total weights up to 100 kg - Can be combined with WT 22/H and WT 2/F-H - Notice: Combination with WT 2/LS not possible - The stop gate stops one or more accumulating workpiece pallets at the defined workpiece pallet stop surface - When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped - For central separation, the stop gate is mounted inside the tracks on the conveyor section using the supplied cross connectors

HD 2/H BG2 lift rotate unit - WT lift above transportation level, approx. 50 mm - Available in 3 sizes (BG) for WT total weights up to 240 kg – BG 1 and BG 2 for use with workpiece pallets WT 2, WT 2/F and WT 2/LS (only with version LS) – BG 3 for use with workpiece pallets WT 2/H and WT 2/F-H - Rotation by 90° or 180° – For rotating square workpiece pallets by 90° or 180° – For rotating non-square workpiece pallets by 180° – For 90° rotation, the reverse rotation for BG 1 and BG 2 takes place below the belt. Reduced cycle times by means of reverse rotation during workpiece pallet change. For BG 3 and 90° rotation, the reverse rotation takes place above the belt– Center position only with BG 1 and BG 2 in 90° version

HD 2/H BG1 lift rotate unit - WT lift above transportation level, approx. 50 mm - Available in 3 sizes (BG) for WT total weights up to 240 kg – BG 1 and BG 2 for use with workpiece pallets WT 2, WT 2/F and WT 2/LS (only with version LS) – BG 3 for use with workpiece pallets WT 2/H and WT 2/F-H - Rotation by 90° or 180° – For rotating square workpiece pallets by 90° or 180° – For rotating non-square workpiece pallets by 180° – For 90° rotation, the reverse rotation for BG 1 and BG 2 takes place below the belt. Reduced cycle times by means of reverse rotation during workpiece pallet change. For BG 3 and 90° rotation, the reverse rotation takes place above the belt– Center position only with BG 1 and BG 2 in 90° version

WT 2/F-H frame workpiece pallets - Frame workpiece pallet for especially high maximum permitted overall weight of up to 240 kg (2 kg/cm length) combined with accumulation roller chain conveyor medium - Fully assembled or unassembled as a kit - Low weights and high stability thanks to aluminum frame construction - Standard grooves to easily fasten cross struts and workpiece supports - PE wear pads for quiet operation and low wear - Integrated stop damper, ensures quiet running onto other workpiece pallets - For workpiece pallet dimensions bWT x lWT = 400 x 400 mm to 1200 x 1200 mm - Special dimensions on request - Suitable for use in an EPA - Frame modules with PE (polyethylene) wear pad

Connection kit synchronous drive VFplus external motor - The connection kit for a synchronous drive is used to synchronously drive two conveyor sections with only one motor