Minarik Drives

The MMRG40U is one of the smallest full-wave four-quadrant drives on the market today. This full-featured, compact drive matches brush-type DC motors ranging from 1/20 to 2HP. The MMRG40U provides all the performance of a full size, four quadrant, regenerative variable speed drive and has our popular MM footprint (3.72 X 4.42). This drive will maintain motor speed with smooth motoring and braking torque and allow high-duty cycle reversing and braking. It has an adjustable current limit, 1% of base speed regulation and can regulate within a 50:1 speed range (open loop).

Minarik Drives' MM23202D is the latest revision to its most popular line. This SCR, dual voltage (115 or 230VAC) drive comes in a NEMA 1 enclosure and is more resilient to vibration than its predecessor and comes with another new features, a user-selectable inhibit circuit. Now the user can adjust the function of the inhibit with jumper pins. The MM23202D drive now comes with LEDs to let the user know when the power is on (green) or if the motor has reached the current limit (red). For applications that require control of a DC motor in the 1/8 to 2 HP range, the MM23202D is an excellent solution.

Minarik Drives' MM23412D is the latest revision to its most popular line. This SCR, dual voltage (115 or 230VAC) drive is in a NEMA 4X enclosure and is more resilient to vibration than its predecessor and comes with another new features, a user-selectable inhibit circuit. Now the user can adjust the function of the inhibit with jumper pins. The MM23412D drive now comes with LEDs to let the user know when the power is on (green) or if the motor has reached the current limit (red). For applications that require control of a DC motor in the 1/20 to 1/4 HP range, the MM23412D is an excellent solution.

The M2 drive provides the power of two drives in one! Now with one DC drive, you can control two different DC motors either independently or in a ratio mode. In independent mode, each side of the M2 can be controlled differently with different trimmer pot settings and different speeds. In speed ratio mode, one speed potentiometer sets the main speed while the other one determines the ratio of the speeds between the motors. In this mode, the drive replaces two single drives and possibly a separate master/follower card too resulting in extreme cost and panel space savings The M2 drive is easy to set up with simple jumpers to choose the modes speed/torque, independent/ratio and coast/decel to stop. In speed mode where speed is controlled, the external potentiometer sets the speed reference signal and the current limit trimmer pot sets the current limit. In torque mode, the external potentiometer sets the torque reference and the current limit trimmer pot sets the runaway speed limit. Set up parameters are easily adjusted with onboard trimmer pots. For OEMs that have fixed settings, the M2 drive is microprocessor based and can have the settings or ranges of the trimmer pots and other functions customized without any hardware changes. The M2 drive is ideal for applications with two DC motors that are working together, two motors that run independently but are physically close or simply when panel space is very limited.

Minarik's MMRGD10-D230AC is one of the smallest full-wave, full-featured regenerative digital DC drives on the market. The dual voltage MMRGD10-D230AC not only brakes and reverses DC brush motors on the fly, but is also in the industry standard MM footprint (3.72 X 4.42). The -PCM option can accept grounded or floating inputs of -10 to +10VDC. If only a unipolar signal is available, there is a terminal input for reversing direction by contact closure. The MMRGD10-D230AC is compatible with our DLC600 digital controller if tighter regulation of set speed is required. Contact factory for connection diagram. For applications that use limit switches, the use of the 200-0386A limit switch logic board with the MMRGD10-D230AC may be a good choice!

Minarik Drives' MM23012D is the latest revision to its most popular line. This SCR drive is dual voltage (115 or 230VAC) and in the industry standard MM footprint (3.58''X 4.30''). This drive is more resilient to vibration than its predecessor and comes with another new feature, a user-selectable inhibit circuit. Now the user can adjust the function of the inhibit with jumper pins. The MM23002D drive now comes with LEDs to let the user know when the power is on (green) or if the motor has reached the current limit (red). For applications that require control of a DC motor in the 1/8 to 2 HP range,the MM23012D is an excellent solution.

The MM23001C drive is a reliable and cost-effective solution for controlling your permanent magnet or shunt-wound DC motors in variable-speed applications. It uses SCR's to provide full-wave rectification of the AC line input. This dual voltage drive operates using 115 VAC or 230 VAC, 50/60 Hz, to operate 90 or 180 VDC SCR brush-type motors from 1/8 to 2 HP. Packaged in a compact footprint, this user-friendly drive possesses diagnostics and options to accommodate user needs.

The MC10 accepts 115 or 230VAC input for operation of 90 and 180VDC permanent magnet or shunt wound DC motors (50/100/200VDC field voltage) from 1/8 to 2 horsepower. Included are power and current limit LEDs, line fuses, inhibit pins for remote start/stop and mounted on the front cover are a speed potentiometer and On/Off switch. Setup is easy with trimmer pot adjustments for minimum speed, maximum speed, acceleration, deceleration, IR compensation and current limit and a screw terminal block for easy wire connections.

The MDBL Series is a general purpose family of drives for brushless DC (electronically commutated) motors. With either a 115 VAC or 230 VAC line source, our drives can control motors that vary in the 90 to 180 VDC range, up to 5 amps or 1.5 HP. With the use of on-board trim pots, you can quickly set the maximum and minimum speeds, acceleration and deceleration rates, motoring and regening current limits, and the proportional and integral feedback gains. Each drive is designed for feedback from 120° hall effect sensors. The onboard microprocessor allows for custom programming for OEMs. Whether it’s as simple as changing the purpose of a jumper, input, or trim pot, to programming entire routines and behaviors specific only to the OEMs application, the MDBL is great for integrating PLC like functionality into your operation. Doing this can eliminate the need of a separate PLC altogether or enhance a system that currently does not have one. The MDBL Series has been tested to the 61800-5-1 Standard and is UL listed in the US and Canada, and includes isolation for remote control from an analog signal.

Minarik Drives expanded the XP series of low-cost, high-performance, pulse-width-modulation (PWM) DC drives to offer the PCMXP02-115AC, which accepts any external analog process control signal from 0 to 10VDC. Users can operate the drives in two distinct modes: manual mode using normal potentiometer operation, or signal mode: operation from an external signal input only. Standard XP drives are versatile and accept any voltage ranging from 70 to 130VAC. XP drives contain a unipolar power supply, which enables them to accept any DC volage input between 100 and 160VDC. Users, after proper calibration, can operate many low voltage motors without additional circuitry. The PCMXP02-115AC yields a constant 1.05 form factor or less over the entire 80:1 speed range resulting in smooth, quiet, cool and low maintenance motor operation.

Minarik Drives has always been a leader in providing low cost PWM motor controls. With the MMXL02-D240AC, we have done it once again, by taking a full-featured PWM drive and reduced it down to the standard MM footprint (4.30 X 3.64). The MMXL02-D240AC has all the features of the larger XL Series, where the speed can be controlled with an isolated 0-5 VDC signal and many drives can be inhibited with a single contact closure. The auto-ranging power supply allows the user to apply 120 or 240VAC without adjusting any switches. The full-featured MMXL02-D240AC is one of the smallest PWM drives on the market today!

Mounting Bracket (x2) Mounting Screw (x2)