Weldcote

Weldcote E316L-16 Stainless Steel Electrodes Produce Weld Deposits Similar To That Of 316-16, But With A Maximum Of 0.04% Carbon. This Extra Low Carbon Content Gives The Weld Deposit Excellent Resistance Against Intergranular Corrosion Caused By Carbide Precipitation. Weldcote 316L Electrodes Are Used For Welding 18%Cr-12%Ni-2.5%Mo Stainless Steels Where The Corrosion Resistance Qualities Of Aisi 316L Are Required. This Electrode Has A High Deposition Rate And Produces A Weld Deposit With Fine Bead Appearance And Exceptional Crack Resistance. 316L-16 Electrodes Are Most Commonly Used In The Textile, Paper, Cellulose And Chemical Equipment Industries For The Fabrication Of 316L, 318, And 319L Stainless Steel Products.

Weldcote Metals E7018 Is The Most Efficient General Purpose, Iron Powder-Low Hydrogen Electrode Used For Welding Carbon Steels, Free-Machining Steels And Low Alloy Steels With A Minimum Yield Strength Of 50,000 Psi. Weldcote Metals 7018 Has A Very Good Deposition Rate, Providing A Quiet Steady Arc With Low Spatter And Medium Penetration. Weld Deposits Are Of X-Ray Quality And Easy Slag Removal, Exceptional Mechanical Properties And A Smooth Uniform Bead Appearance.Weldcote Metals 7018 Has Excellent Operator Appeal And May Used In Any Position With Ac Or Dc (Reverse Polarity). 7018 Electrodes Are Used For Many Astm Specifications And Low Hydrogen Levels Needed To Prevent Issues Like Crackling. More Specific Applications Include Process Piping, Cold Rolled Steels Such As Found In Heavy Machinery Fabrications, Fired And Unfired Pressure Vessels, Shop And Field Welding Of Bridges And Structural Steels, Case Steels, Shipbuilding, Just About Any Medium Carbon, Low Alloy Steel Where The Welds Are Subject To X-Ray Inspection. Use The Drag Technique Along The Weld Join. A 3 To 5 Degree Angle Is Ideal For Vertical Up Welding And Using A Slight Weaving Technique. Please Note That Procedures May Vary With A Change In Positon, Base Metals, Filler Metals, Equipment And Other Changes.

Er70S-6 Is A Copper Coated Carbon Steel Wire Or Rod That Contains Higher Levels Of Manganese And Silicon Than Other Standard Grades Of Carbon Steel Wires. This Wire Features Excellent Tolerance Of Rust And Scale. E70S-6 Is Used For Butt And Fillet Welding Of Sheet And Plate Of A Variety Of Thickness. Applications Include General Carbon Steel Fabrication. It Also Performs Well On Rusty And Oily Areas On Carbon Steels. Mig Wire.

Er70S-6 Is A Copper Coated Carbon Steel Wire Or Rod That Contains Higher Levels Of Manganese And Silicon Than Other Standard Grades Of Carbon Steel Wires. This Wire Features Excellent Tolerance Of Rust And Scale. E70S-6 Is Used For Butt And Fillet Welding Of Sheet And Plate Of A Variety Of Thickness. Applications Include General Carbon Steel Fabrication. It Also Performs Well On Rusty And Oily Areas On Carbon Steels. Mig Wire.