Phoenix Contact 2905280

The loop-powered isolator is equipped with two channels for input, functioning as a 2-way isolator. It utilizes plug-in connection technology to provide electrical isolation for analog signals. The input signal directly corresponds to the output signal, with a range of 0(4) mA to 20 mA. Notably, the device maintains a 2-way isolation between the input and output, ensuring safe operation.

With a maximum input voltage limitation of 30.5 V and a current input signal range of 0 mA to 20 mA, this isolator supports a substantial load output current of up to 1375 Ω at 20 mA. The electrical specifications include a typical transmission error of 0.08% and a maximum temperature coefficient of ≤ 0.002%/K under a 100 Ω load. The device is designed to operate within a wide temperature range of -40 °C to 85 °C.

For installation, the device employs screw connection technology with a stripping length of 7 mm, accommodating conductor cross-sections from 0.2 mm² to 2.5 mm². The isolator is housed in a gray PA 6.6-FR casing, achieving a flammability rating of V0 and a degree of protection classified as IP20. The unit's dimensions are as follows: width of 12.5 mm, height of 112.5 mm, and depth of 113.7 mm.

Compliance with standards such as EN/IEC 60079-0 and EN 61326-1 ensures that the isolator meets necessary safety and electromagnetic compatibility requirements. It is suitable for mounting on DIN rails and is certified under specific guidelines.