Phoenix Contact 3270145

This product features potential distributors with the capability to supply up to 6 mm², operating at a nominal voltage of 250 V and a nominal current of 17.5 A, utilizing a push-in connection method.

This plug features a nominal voltage of 500 V and a nominal current of 24 A, utilizing a push-in connection method with a rated cross section of 2.5 mm².

Universal housing designed for PCBs, featuring fixed corner inlays and complete assembly components including housing half shells, closed side panels, and screws for secure attachment.

Contact insert designed for the VARIOCON range, featuring 15 positions and capable of accommodating conductor cross sections from 0.14 mm² to 1.5 mm², with a rated voltage of 250 V and a rated current of 10 A.

This connector hood is designed for sensor and actuator boxes, featuring an M12-SPEEDCON-socket Metal connection with eight slots and a single slot assignment.

Device protection, according to type 3/class III, with network interference suppression filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.

Surge protective device for 2-pos. isolated and grounded 1,000 V DC PV systems, for DIN rail mounting, 3-pos. base element, three pluggable temperature-monitored protective elements, status message on each plug.

CHARX connect, Mobile AC charging cable, with vehicle charging connector and infrastructure charging plug, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, with protective cap, Type 2, IEC 62196-2, 32 A / 480 V (AC), C-Line, housing: black, gray, PHOENIX CONTACT logo, cable: 7.5 m, black, straight

Surge protective device, consisting of plug and base element, with integrated multi-stage status indicator on the module, for protecting a double wire for analog and digital telecommunications interfaces (VDSL up to 50 Mbps, on short paths (< 300 m) up to 100 Mbps).

Precision crimping pliers for uninsulated and insulated ferrules, compatible with DIN 46228 Part 1 and 4, from 0.14 mm² to 6 mm², suitable for TWIN ferrules up to 2 x 4 mm², automatic cross-section adjustment, lateral insertion, equipped with fall-s…

Plug-in surge arrester, in accordance with Type 2/Class II, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE).

CHARX connect, Infrastructure charging socket set, for charging electric vehicles (EV) with alternating current (AC), can be reconnected, with rear protective cap for strain relief and touch protection, Type 2, IEC 62196-2, 32 A / 480 V (AC), locking actuator: 12 V, 4-pos., Rear panel mounting, M5 thread, B-Line, housing: black, PHOENIX CONTACT logo