Hai bisogno di ulteriori informazioni?

Chiamaci al:+48 17 778 34 19

Schneider Electric B5.50

Name: Thermal Unit, Type S, Type B, melting alloy, Class 20
Brand: Schneider Electric
SKU: B5.50

Thermal Unit, Type S, Type B, melting alloy, Class 20

1 / 5

Immagine di catalogo del produttore

Descrizione del prodotto

Ciclo di vita:

Thermal units are intended to protect motors, controllers, and branch-circuit conductors against excessive heating due to prolonged motor over-currents up to and including locked rotor currents. Protection of the motor and the other branch circuit components from higher currents, due to short circuits or grounds, is a function of the branch circuit fuses or circuit breakers. Class 20 thermal units respond to overload current conditions according to trip curves. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units have a one piece construction. The motor current passes through a small heater winding within these thermal units. Under overload conditions, the heat causes a special solder to melt allowing a ratchet wheel to spin free thus opening the control circuit contacts and opening the motor contacts.

Hai bisogno di ulteriori informazioni?

Chiamaci al:+48 17 778 34 19

Confronta le offerte

Metodi di pagamento:

Dettagli dell'offerta

Offerta da:: Fornitore di fiducia — Regno Unito, membro dal 2026, 20–49 dipendenti
Disponibilità:: 2 pz.
Disponibile
Aggiornato il: 07-11-2025
Garanzia:: Non indicata
Condizione:: Nuovo da eccedenze

Nuovo da eccedenze - Un articolo nuovo, inutilizzato e non danneggiato senza garanzia del produttore. L'articolo può arrivare senza confezione originale o in una confezione sostitutiva. Se fornita, la scatola potrebbe essere stata aperta.

Il venditore è responsabile della spedizione del prodotto e della fatturazione

Specifiche tecniche

Marchio: Schneider Electric
Thermal Overload Type: melting alloy
Range Of Product: B
Motor Tripping Class: 20
China Rohs Regulation: Product out of China RoHS scope. Substance declaration for your information.
Pvc Free: Yes
Eu Rohs Directive: Not applicable, out of EU RoHS legal scope

Offerte disponibili

(2)

	Condizione	Disponibilità	Fornitore	Garanzia	Azione
	Condizione Nuovo da eccedenze	Disponibilità 2 pz. Disponibile Aggiornato il: 07-11-2025	Fornitore Regno UnitoFornitore di fiducia — membro dal 2026, 20–49 dipendenti	Garanzia Non indicata
	Condizione Ricondizionato	Disponibilità 5 pz. Disponibile Aggiornato il: 07-11-2025	Fornitore Regno UnitoFornitore di fiducia — membro dal 2026, 20–49 dipendenti	Garanzia Non indicata

Documenti

Scheda tecnica

Scheda tecnica per Schneider Electric B5.50, incluse specifiche e caratteristiche.

Scarica scheda dati

Modelli CAD

Modello CAD 3D e disegni tecnici, pronti per il tuo software di progettazione.

Scarica modello CAD

Dati del prodotto aggiornati: 07-11-2025

Prodotti compatibili

2510MBA1Schneider Electric

Manual Starter, integral horsepower, NEMA M0, 600 VAC, 2 pole, 2 HP at 230 VAC, single phase, no indicator, NEMA 12

2510MBA2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 12

2510MBG1Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 2 pole, 2HP at 230VAC, 1 phase, no indicator, NEMA 1

2510MBG2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 1

2510MBO1Schneider Electric

Manual Starter, integral horsepower, NEMA M0, 600 VAC, 2 pole, 2 HP at 230 VAC, single phase, no indicator, open style

2510MBO2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 1 phase, no indicator, open

2510MBW1Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 2 pole, 2HP at 230VAC, 1 phase, no indicator, NEMA 4/4X

2510MBW11Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 2 pole, 2HP at 230VAC, 1 phase, no indicator, NEMA 4/4X

2510MBW12Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510MBW2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510MCA1Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 2 pole, 3HP at 230VAC, 1 phase, no indicator, NEMA 12

2510MCA2Schneider Electric

Manual Starter, integral horsepower, NEMA M1P, 600 VAC, 2 pole, 5 HP at 230 VAC, single phase, no indicator, NEMA 12

2510MCA3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 12

2510MCG1Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 2 pole, 3HP at 230VAC, 1 phase, no indicator, NEMA 1

2510MCG2Schneider Electric

This manual starter provides overload protection and On-Off control for AC motors up to 5HP at 230VAC in a single-phase configuration.

2510MCG3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 1

2510MCO3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, open

2510MCW13Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510MCW2Schneider Electric

Manual starter, integral horsepower, NEMA M1P, 600VAC, 2 pole, 5HP at 230VAC, 1 phase, no indicator, NEMA 4/4X

2510MCW3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510TBG2Schneider Electric

Manual Starter, integral horsepower, NEMA M0, 600 VAC, 3 pole, 5 HP at 380/575 VAC, three phase, no indicator, NEMA 1

2510TCO3Schneider Electric

Manual Starter, integral horsepower, NEMA M1, 600 VAC, 3 pole, 10 HP at 380/575 VAC, three phase, no indicator, open

8911DPSG13V02Schneider Electric

Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 120VAC coil, melting alloy overload, NEMA 1, +options

8911DPSG13V06Schneider Electric

Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 440/480VAC 50/60Hz coil, melting alloy overload, NEMA 1

8911DPSG13V09Schneider Electric

Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG23V06Schneider Electric

Starter, Definite Purpose, nonreversing, 25A, 2 pole, 1 phase, 480VAC coil, melting alloy overload, NEMA 1, +options

8911DPSG23V09Schneider Electric

Starter, Definite Purpose, nonreversing, 25A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG32V09Schneider Electric

Starter, Definite Purpose, nonreversing, 30A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG33V09Schneider Electric

Starter, Definite Purpose, nonreversing, 30A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1, +options

8911DPSG42V09Schneider Electric

Starter, Definite Purpose, nonreversing, 40A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG43V06Schneider Electric

Starter, Definite Purpose, nonreversing, 40A, 3 pole, 3 phase, 480VAC coil, melting alloy overload, NEMA 1, +options

8911DPSG43V09Schneider Electric

Starter, Definite Purpose, nonreversing, 40A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG53V09Schneider Electric

This nonreversing definite purpose starter is rated for 50A and designed for 3-phase applications with a coil voltage range of 208V to 240V AC.

8911DPSO13V02Schneider Electric

NEMA starter, Definite Purpose, 20A, 7.5HP at 600VAC, 3 phase, 3 pole, melting alloy, 120VAC coil, open

8911DPSO32V09Schneider Electric

NEMA starter, Definite Purpose, 30A, 5HP at 240VAC, 1 phase, 2 pole, melting alloy, 208V to 240VAC coil, open

8911DPSO33V02Schneider Electric

NEMA starter, Definite Purpose, 30A, 20HP at 600VAC, 3 phase, 3 pole, melting alloy, 120VAC coil, open

8911DPSO42V09Schneider Electric

NEMA starter, Definite Purpose, 40A, 7.5HP at 240VAC, 1 phase, 2 pole, melting alloy, 208V to 240VAC coil, open

8911DPSO43V14Schneider Electric

NEMA starter, Definite Purpose, 40A, 25HP at 600VAC, 3 phase, 3 pole, melting alloy overload, 24VAC coil, open

8911DPSO53V02Schneider Electric

NEMA starter, Definite Purpose, 50A, 30HP at 600VAC, 3 phase, 3 pole, melting alloy, 120VAC coil, open

9065SEO8Schneider Electric

Overload Relay, Type S, melting alloy, separate mount overload, NEMA size 2, 3 pole, 3 phase, 45A, 600VAC

Dashboard analitica AutomaINSIGHTS per B5.50

Analisi di mercato per B5.50

Ottieni dati analitici e di mercato in tempo reale su B5.50 e altri prodotti della categoria Accessori generali per ottimizzare le decisioni di acquisto.

Dati sulla disponibilità di magazzino in tempo reale da oltre 700 distributori MRO in Europa e negli Stati Uniti.
Analisi dei prezzi per condizione (nuovo, usato, ricondizionato) con prezzi mediani di mercato
Monitoraggio della disponibilità dei componenti critici per prevenire i tempi di inattività della produzione

Categorie correlate

Accessori