Schneider Electric
BMXMSP0200
PTO module, Modicon X80, 2 channels, 4 I, 24V DC, 4.3mA, 2 connectors, 28 pins
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
€363.64
1
Metodi di pagamento:
Un totale di 20 Parts In-Stock da 19 Distributors
Condizioni del prodotto:
Offerta con tempi di consegna del produttore
Spedizione in:Su richiesta
Miglior prezzo:
€400.41
Additional Information
- Part Number
- BMXMSP0200
- UNSPSC
- 26101205
- Tariff Code
- 8538908180
- Country of Origin
- FR
Environment
- Ambient Air Temperature For Operation
- -25-70 °C
- Standards
- EN/IEC 61131-2 || EN/IEC 61010-2-201 || UL 61010-2-201 || CSA C22.2 No 61010-2-201 || IACS E10 || EN/IEC 61000-6-5, interface type 1 and type 2 || EN/IEC 61850-3, location G || EN/IEC 60079-0
- Environmental Characteristic
- hazardous location class I division 2
- Directives
- 2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility || 2014/34/EU - ATEX directive
- Derating Factor
- without
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Electrical Connection
- 2 connectors 28 pins
- Current Per Channel
- 0.4 A
- Number Of Outputs
- 1 pulse output || 2 auxiliary output
- Insulation Resistance
- > 10 MOhm
- Product Certifications
- CE || UL || CSA || RCM || EAC || Merchant Navy || ATEX zone 2/22 || IECEx zone 2/22
- Response Time
- < 200 µs for position completed input and drive ready input || < 60 µs for origin input and proximity input
- Current Consumption
- 35 mA 24 V DC preactuator || 150 mA 3.3 V DC typical || 200 mA 3.3 V DC maximum
- Discrete Output Current
- 50 mA
- Current State 0 Guaranteed
- <= 1.5 mA
- Voltage State 0 Guaranteed
- 5 V
- Load Impedance Ohmic
- 15000 Ohm
- Input Current
- 4.3 mA
- Current State 1 Guaranteed
- >= 2 mA
- Operating Threshold
- > 12 V no error supply voltage || > 8 V error supply voltage
- Output Short-Circuit Protection
- by current limiter and electronic circuit breaker
- Output Voltage Limits
- 19...30 V
- Insulation Between Channels
- no insulated
- Input Voltage
- 24 V DC
- Insul Btwn Prim And Second
- 1500 Vrms
- Local Signalling
- for module operating (RUN) 1 LED (green) || for external fault (I/O) 1 LED (red) || for internal fault, module failure (ERR) 1 LED (red) || for download (DL) 1 LED (green) || for channel status (CH00) 8 LEDs (green) || for channel status (CH01) 8 LEDs (green)
- Output Overload Protection
- by current limiter and electronic circuit breaker
- Output Voltage
- 24 V DC
- Module Format
- standard
- Reverse Polarity Protection
- by reverse mounting diode on output || integrated on input
- [Ures] Residual Voltage
- 0.15 V at state 1
- Maximum Leakage Current
- 0.05 mA at state 0
- Preactuator Voltage Detection Threshold
- < 8 V error preactuator voltage auxiliary output || < 8 V no error preactuator voltage auxiliary output || > 14 V error preactuator voltage pulse output || > 14 V no error preactuator voltage pulse output
- Response Time On Output
- 1.2...1.5 ms on appearance || 1.2...1.5 ms on disappearance
- Voltage State 1 Guaranteed
- >= 11 V
Specifications
- Range Of Product
- Modicon X80
- Number Of Inputs
- 4
- Output Compatibility
- signal converter (USIC) || RS422, 7 mA input || source input, 5 V to 24 V
- Product Or Component Type
- PTO module
- Output Frequency
- 200 kHz <0.5 m with USIC and VW3M8210R05 || 100 kHz <5 m with the normal source input circuit || 200 kHz <10 m with the RS422 compatible circuits
- Input Compatibility
- 2-wire/3-wire proximity sensor 19.2-30 V IEC 947-5-2
- Number Of Channels
- 2
- Discrete Input Type
- current sink yes origin input IEC 61131-2 type 3 || current sink yes proximity input and limit switch input IEC 61131-2 type 3 || current sink or source counter in position input IEC 61131-2 type 3 || current sink or source drive ready, emergency input IEC 61131-2 type 3
Documenti
Data Sheet
ScaricareModelli CAD
traceparts
Scaricare