BMXMSP0200

Environment

Ambient Air Temperature For Operation

-25-70 °C

Standards

EN/IEC 61131-2 || EN/IEC 61010-2-201 || UL 61010-2-201 || CSA C22.2 No 61010-2-201 || IACS E10 || EN/IEC 61000-6-5, interface type 1 and type 2 || EN/IEC 61850-3, location G || EN/IEC 60079-0

Environmental Characteristic

hazardous location class I division 2

Directives

2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility || 2014/34/EU - ATEX directive

Derating Factor

without

Contractual warranty

Warranty

18 months

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Electrical Connection

2 connectors 28 pins

Current Per Channel

0.4 A

Number Of Outputs

1 pulse output || 2 auxiliary output

Insulation Resistance

> 10 MOhm

Product Certifications

CE || UL || CSA || RCM || EAC || Merchant Navy || ATEX zone 2/22 || IECEx zone 2/22

Response Time

< 200 µs for position completed input and drive ready input || < 60 µs for origin input and proximity input

Current Consumption

35 mA 24 V DC preactuator || 150 mA 3.3 V DC typical || 200 mA 3.3 V DC maximum

Discrete Output Current

50 mA

Current State 0 Guaranteed

<= 1.5 mA

Voltage State 0 Guaranteed

5 V

Load Impedance Ohmic

15000 Ohm

Input Current

4.3 mA

Current State 1 Guaranteed

>= 2 mA

Operating Threshold

> 12 V no error supply voltage || > 8 V error supply voltage

Output Short-Circuit Protection

by current limiter and electronic circuit breaker

Output Voltage Limits

19...30 V

Insulation Between Channels

no insulated

Input Voltage

24 V DC

Insul Btwn Prim And Second

1500 Vrms

Local Signalling

for module operating (RUN) 1 LED (green) || for external fault (I/O) 1 LED (red) || for internal fault, module failure (ERR) 1 LED (red) || for download (DL) 1 LED (green) || for channel status (CH00) 8 LEDs (green) || for channel status (CH01) 8 LEDs (green)

Output Overload Protection

by current limiter and electronic circuit breaker

Output Voltage

24 V DC

Module Format

standard

Reverse Polarity Protection

by reverse mounting diode on output || integrated on input

[Ures] Residual Voltage

0.15 V at state 1

Maximum Leakage Current

0.05 mA at state 0

Preactuator Voltage Detection Threshold

< 8 V error preactuator voltage auxiliary output || < 8 V no error preactuator voltage auxiliary output || > 14 V error preactuator voltage pulse output || > 14 V no error preactuator voltage pulse output

Response Time On Output

1.2...1.5 ms on appearance || 1.2...1.5 ms on disappearance

Voltage State 1 Guaranteed

>= 11 V

Specifications

Range Of Product

Modicon X80

Number Of Inputs

4

Output Compatibility

signal converter (USIC) || RS422, 7 mA input || source input, 5 V to 24 V

Product Or Component Type

PTO module

Output Frequency

200 kHz <0.5 m with USIC and VW3M8210R05 || 100 kHz <5 m with the normal source input circuit || 200 kHz <10 m with the RS422 compatible circuits

Input Compatibility

2-wire/3-wire proximity sensor 19.2-30 V IEC 947-5-2

Number Of Channels

2

Discrete Input Type

current sink yes origin input IEC 61131-2 type 3 || current sink yes proximity input and limit switch input IEC 61131-2 type 3 || current sink or source counter in position input IEC 61131-2 type 3 || current sink or source drive ready, emergency input IEC 61131-2 type 3

CAD Models

traceparts

Download