Phoenix Contact Industrial Automation Spare Parts

The Phoenix Contact TC MGUARD RS2000 4G VPN router is a robust industrial-grade device designed for secure remote communication and network connectivity in demanding environments. It integrates a high-speed 4G LTE cellular interface, offering global connectivity with fallback to UMTS and CDMA networks for reliable operation. This router features a built-in 4-port 10/100 Mbps Ethernet switch, allowing for local networking of industrial equipment.

The Phoenix Contact PLC-BSC- 24DC/21 Relay Base is a versatile and reliable relay socket designed for universal applications. This 6.2 mm PLC basic terminal block features a screw connection and is perfect for mounting on DIN rail NS 35/7,5. It comes without a relay or solid-state relay, providing flexibility for various configurations.Key Features:6.2 mm width for space-saving installationScrew connection for secure and easy wiringCompatible with electromechanical and solid-state relaysIntegrated protective circuits including damping diode and polarity protection diodeLED status display for easy monitoringIdeal for:Industrial automationControl panelsBuilding automationEnergy management systems

This AS-Interface gateway connects AS-i 2.1 to Inline systems (IP20). It integrates into Inline for PROFIBUS, PROFINET, DeviceNet™, or Ethernet. AS-i configuration is direct via keypad or software. Inline integration uses CMD software. Features a 3-digit 7-segment display for status/diagnostics. Offers plug-in wiring, multi-function diagnostics for INTERBUS/AS-i, auto power via Inline station, and marker strip labeling. Acts as an AS-i master, supporting up to 62 AS-i slaves (spec. 2.1).

Distribution block, the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories, Block with vertical alignment and integrated supply, nom. voltage: 690 V, nominal current: 24 A, connection method: Push-in connection, Load contact, cross section: 0.14 mm² - 4 mm², Push-in connection, Line contact, Rated cross section: 6 mm², cross section: 0.5 mm² - 10 mm², mounting type: NS 35/7,5, NS 35/15, color: red

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 76 A, connection method: Screw connection, Rated cross section: 16 mm², cross section: 1.5 mm² - 25 mm², mounting type: NS 35/7,5, NS 35/15, color: red

Marker card, self-adhesive, horizontally labeled with the consecutive numbers: 1 ... 10, 10-section marker strips with 12 identical decades, white, for terminal block width: 5.08 mm

PCB terminal block, nominal current: 17.5 A, rated voltage (III/2): 200 V, nominal cross section: 1.5 mm², number of potentials: 7, number of rows: 1, number of positions per row: 7, product range: SPT 1,5/..-V, pitch: 3.5 mm, connection method: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 90 °, color: green, Pin layout: Linear double pinning, Solder pin [P]: 2.5 mm, number of solder pins per potential: 2, type of packaging: packed in cardboard

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: MC 1,5/..-ST, pitch: 3.81 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, number of solder pins per potential: 1, plug-in system: COMBICON MC 1,5, locking: without, mounting: without, type of packaging: packed in cardboard

Maintenance license (1 year) for the Emalytics Controller license NC4-5000

Zack marker strip flat, 10-section, horizontally labeled with the consecutive numbers: 11 ... 20, white, for terminal block width: 5 mm

Maintenance license (1 year) for the Emalytics Controller license NC4-500

End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray

DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver, Pack of 10 (20 m)

Fixed bridge, number of positions: 2, color: silver

Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Cable lug connection, number of positions: 1, load current: 150 A, cross section: 16 mm² - 50 mm², connection direction of the conductor to plug-in direction: -90 °, width: 18.8 mm, color: gray

Shrink sleeve, Roll, white, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL: without print, perforated, mounting type: slide-on, cable diameter range: 0.8 ... 2.4 mm, lettering field size: 30 x 4 mm, Number of individual labels: 5000

Shrink sleeve, roll, yellow, unmarked, 2:1 shrink ratio, can be marked with: THERMOMARK ROLL, THERMOMARK X.1, perforated, mounting type: slid on

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver

Insert label, continuous, cassette, white with black imprint, mounting type: slide-in, can be marked with: THERMOFOX

Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm, Number of individual labels: 10