Weidmuller

8871010000

1 / 7
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail

Descrizione

RIDERSERIES RCI, Relay module, Number of contacts: 1 CO contact AgNi 90/10, Rated control voltage: 24 V AC, Continuous current: 16 A(1, Screw connection
Part Number
8871010000
Metodi di pagamento:
Migliore offerta da:
GBFornitore Automa.Net di fiducia
Disponibilità:
10 pz.
Disponibile
Aggiornato il: 19-11-2024
Garanzia:
12 mesi
Consegna stimata:
Su richiesta
Condizione:
Nuovo sigillato in fabbrica
Nuovo sigillato in fabbrica - Un articolo nuovo di zecca, inutilizzato, non aperto, non danneggiato, nella sua confezione originale sigillata dal produttore.
Processo di Pagamento Sicuro
Politiche di Reso e Rimborso
Politiche di Spedizione
Politiche di Garanzia

General Data

Rail
TS 35
Test button
No
Mechanical switch position indicator
No
Colour
black

Approvals

Approvals
CE, DNV GL, EAC
ROHS
Conform

Dimensions And Weights

Width
15.8 mm
Width (inches)
0.622 inch
Height
77 mm
Height (inches)
3.031 inch
Depth
70.2 mm
Depth (inches)
2.764 inch
Net weight
59.9 g

Connection Data

Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Tightening torque, min.
0.5 Nm
Tightening torque, max.
0.7 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
1 mm²
Clamping range, max.
2.5 mm²
Wire cross-section, solid, min.
1 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross-section, finely stranded, min.
1 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
1 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
1 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Blade size
size PZ1

Contact Data

Contact type
1 CO contact (AgNi 90/10)
Mechanical service life
AC coil 5 x 106 switching cycles, DC coil 10 x 106 switching cycles

Input

Rated control voltage
24 V AC
Rated current AC
31.6 mA
Power rating
0.75 VA
Pull-in/drop-out voltage, typ.
18 V / 3.6 V AC
Coil resistance
350 Ω ± 10 %
Status indicator
red LED

Classifications

ETIM 6.0
EC001437
ETIM 7.0
EC001437
EClass 9.0
27-37-16-01
EClass 9.1
27-37-16-01
EClass 10.0
27-37-16-01
UNSPSC
30-21-19-17

Output

Rated switching voltage
250 V AC
Max. switching voltage, AC
400 V
Continuous current
16 A(1
Inrush current
30 A / 4 s
AC switching capacity (resistive), max.
4000 VA
DC switching capacity (resistive), max.
384 W @ 24 V
Switch-on delay
≤ 8 ms
Switch-off delay
≤ 6 ms
Min. switching power
1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
Max. switching frequency at rated load
0.1 Hz

Product Information

Product information
1) For full continuous current (16 A), relay connections 11–21, 12–22 and 14–24 must be bridged. IP20 without connected conductor at complete opened clamping yoke connection.

Environmental Product Compliance

REACH SVHC
Lead 7439-92-1

Insulation Coordination

Rated voltage
250 V
Surge voltage category
III
Pollution severity
2
Insulating material group
IIIa
Protection degree
IP20
Dielectric strength, Input/Output
5 kVeff / 1min
Creepage and clearance distance input – output
≥ 8 mm
Dielectric strength of open contact
1 kVeff / 1 min
Impulse withstand voltage
5 kV (1.2/50 µs)

Temperatures

Humidity
40 °C / 93 % rel. humidity, no condensation
Operating temperature, max.
70 °C
Operating temperature, min.
-40 °C
Storage temperature, max.
70 °C
Storage temperature, min.
-40 °C
Operating temperature
-40 °C...70 °C
Storage temperature
-40 °C...70 °C

Further Details Of Approvals / Standards

Standards
DIN EN 50178
Certificate no. (CSA) relay
249409-2426937
Certificate no. (CSA) base
249409-2295474
Certificate No. (DNVGL)
TAA000011A
Certificate no. (cURus) relay
E224238
Certificate no. (cURus) base
E223759