Filtry
EMC Filter, L Type, 480V AC, 3 PH, 50-60 Hz, 0.4-3.7 kW (0.5-5 HP), Panel Mount, IP20, UL-NEMA Type Open, Use With Powerflex 4M-4-40-40P
EMC Filter, L Type, 480V AC, 3 PH, 50-60 Hz, 0.4-3.7 kW (0.5-5 HP), Panel Mount, IP20, UL-NEMA Type Open, Use With Powerflex 4M-4-40-40P
Terminal Base, POINT I/O, One Piece, 12 Spring-Clamp Terminals, Open Style, DIN Mounted
Terminal Base, POINT I/O, One Piece, 12 Spring-Clamp Terminals, Open Style, DIN Mounted
SIEMENS LOW VOLTAGE 3VA IEC MOLDED CASE CIRCUIT BREAKER WITH ELECTRONIC TRIP UNIT. 3VA25 FRAME WITH MEDIUM LOW (CLASS M) BREAKING CAPACITY. 800A 4-POLE Icu: (25KAIC AT 690V) (55KAIC AT 415V). ETU320 TRIP UNIT LI. SPECIAL FEATURES: CONNECTION WITH LUG TERMINAL / NUT KEEPER.. DIMENSIONS (W x H x D) IN: 8.3 x 12.6 x 6.1.
SIEMENS LOW VOLTAGE 3VA IEC MOLDED CASE CIRCUIT BREAKER WITH ELECTRONIC TRIP UNIT. 3VA25 FRAME WITH MEDIUM LOW (CLASS M) BREAKING CAPACITY. 800A 4-POLE Icu: (25KAIC AT 690V) (55KAIC AT 415V). ETU320 TRIP UNIT LI. SPECIAL FEATURES: CONNECTION WITH LUG TERMINAL / NUT KEEPER.. DIMENSIONS (W x H x D) IN: 8.3 x 12.6 x 6.1.
CIRCUIT BREAKER 10KA, 1POLE, D, 8A ACC. TO UL 489 - 277V
CIRCUIT BREAKER 10KA, 1POLE, D, 8A ACC. TO UL 489 - 277V
SIRIUS, central unit 3RK3 basic for modular safety system 3RK3 4/8 f-di,1f-ro,1 f-do,24 V DC parameterizable using software safety es 45 mm overall width spring-type terminal up to sil3 (iec 61508) up to performance level e (iso 13849-1)
SIRIUS, central unit 3RK3 basic for modular safety system 3RK3 4/8 f-di,1f-ro,1 f-do,24 V DC parameterizable using software safety es 45 mm overall width spring-type terminal up to sil3 (iec 61508) up to performance level e (iso 13849-1)
Temperature Monitoring Relay SIMIREL Conversion Type= Digital deg. F Number of Sensors = 2 Sensor Type = (Sel-PT100/1000;KTY83/84;NTC) Function = (Sel-Over/Under/Window Monitor) Measuring Range = -58+932 Control Voltage = 24..240VUC Spring
Temperature Monitoring Relay SIMIREL Conversion Type= Digital deg. F Number of Sensors = 2 Sensor Type = (Sel-PT100/1000;KTY83/84;NTC) Function = (Sel-Over/Under/Window Monitor) Measuring Range = -58+932 Control Voltage = 24..240VUC Spring
Separate standard actuator for pos. w. tumbler 3SE5312../3SE5322.. and asi 3sf13... and pos. with separate actuator 3SE51../3SE52.. and asi 3sf11../3sf21..
Separate standard actuator for pos. w. tumbler 3SE5312../3SE5322.. and asi 3sf13... and pos. with separate actuator 3SE51../3SE52.. and asi 3sf11../3sf21..
SIEMENS LOW VOLTAGE 3VA IEC MOLDED CASE CIRCUIT BREAKER WITH ELECTRONIC TRIP UNIT. 3VA21 FRAME WITH EXTREMELY HIGH (CLASS L) BREAKING CAPACITY. 63A 3-POLE Icu: (24KAIC AT 690V) (150KAIC AT 415V). ETU560 TRIP UNIT LCD LSIG. SPECIAL FEATURES: CONNECTION WITH BOX TERMINAL / STEEL WRAP AROUND LUG. DIMENSIONS (W x H x D) IN: 4.1 x 7.1 x 4.2.
SIEMENS LOW VOLTAGE 3VA IEC MOLDED CASE CIRCUIT BREAKER WITH ELECTRONIC TRIP UNIT. 3VA21 FRAME WITH EXTREMELY HIGH (CLASS L) BREAKING CAPACITY. 63A 3-POLE Icu: (24KAIC AT 690V) (150KAIC AT 415V). ETU560 TRIP UNIT LCD LSIG. SPECIAL FEATURES: CONNECTION WITH BOX TERMINAL / STEEL WRAP AROUND LUG. DIMENSIONS (W x H x D) IN: 4.1 x 7.1 x 4.2.
SUPPLEMENTARY PROTECTOR,1P,8A,CURVE C Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 1 Pole, 8 Amps, 277 VAC, Trip Characteristic Curve C, 18mm Width, 70mm Depth, UL File E116386 in Vol. 1 Sec. 2
SUPPLEMENTARY PROTECTOR,1P,8A,CURVE C Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 1 Pole, 8 Amps, 277 VAC, Trip Characteristic Curve C, 18mm Width, 70mm Depth, UL File E116386 in Vol. 1 Sec. 2
CIRCUIT BREAKER 230/400V 25KA, 1POLE, D, 10A, D=70MM
CIRCUIT BREAKER 230/400V 25KA, 1POLE, D, 10A, D=70MM
Kinetix 6000 Integrated Axis Module, 22.6 Amp DC peak output current tobus
Kinetix 6000 Integrated Axis Module, 22.6 Amp DC peak output current tobus
Communications Adapter, DPI To Ethernet IP, Dual, Port DPV2, Drive Control Pod Mount, Use With Powerflex 753 And 755
Communications Adapter, DPI To Ethernet IP, Dual, Port DPV2, Drive Control Pod Mount, Use With Powerflex 753 And 755
Controller, ControlLogix, 8 MB User Memory, 0.98MKB I/O Memory, USB Port, 500 Controller Connections, 4 Character Alpha/NumericDisplay, 5ma @ 1.2VDC, 800ma @ 5.1VDC
Controller, ControlLogix, 8 MB User Memory, 0.98MKB I/O Memory, USB Port, 500 Controller Connections, 4 Character Alpha/NumericDisplay, 5ma @ 1.2VDC, 800ma @ 5.1VDC
AC Drive, 0.75 kW (1 HP), 120V AC Input, 1 PH, 50-60 Hz, 4.5 A Output, IP20, UL-NEMA Type Open, Panel Mounting, With Brake IGBT, FrameB, 0.98 PF, Integral Keypad And Led Display, RS485, Fixed Terminal Block Connections.
AC Drive, 0.75 kW (1 HP), 120V AC Input, 1 PH, 50-60 Hz, 4.5 A Output, IP20, UL-NEMA Type Open, Panel Mounting, With Brake IGBT, FrameB, 0.98 PF, Integral Keypad And Led Display, RS485, Fixed Terminal Block Connections.
Output Module, CompactLogix, Analog, 4 Isolated Point Input, 4 Point, Voltage Only
Output Module, CompactLogix, Analog, 4 Isolated Point Input, 4 Point, Voltage Only
Input Module, ControlLogix, AC Digital, 16 Point, 159-265VAC, Individually Isolated
Input Module, ControlLogix, AC Digital, 16 Point, 159-265VAC, Individually Isolated
OXP6X265 SHAFT for pistol handle
OXP6X265 SHAFT for pistol handle
The softstarter PSE30-600-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.
The softstarter PSE30-600-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.
This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 4A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.
This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 4A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.
IP65-SMOOTH-HIGH LID-160X135X150-1/4 TS - GWT 650°C
IP65-SMOOTH-HIGH LID-160X135X150-1/4 TS - GWT 650°C