Signamax

065-1110

1 / 1
thumbnail

Opis

The Signamax 10/100 to 100FX Media Converters with Link Fault Signaling provides the means for an SNMP managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with certain options. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance.
Part Number
065-1110
UPC
76347406374
  • Termin płatności do 90 dni od 500+ dostawców.
  • Rabaty na odsprzedaż do 40%!
Zarejestruj się
Wyślij zapytanie o cenę
1
Metody płatności:
Poproś o wycenę, a prześlemy Ci informacje o dostępności i cenie.

LED Status Indicators

Per Unit
Power
Per RJ-45 Port
Link/Activity, Full Duplex/Collision (FDX/COL); RJ-45 port speed
Per Fiber Port
Link/Activity, Full Duplex/Collision (FDX/COL)

Performance

Latency
< 4.2 μs (LIFO)
Throughput @ 100Base
148,809 pps (64-byte packets)
Speed
100BaseTX: 100/200 Mbps for half/full duplex; 10BaseT: 10/20 Mbps for half/full duplex
MAC Address Capacity
1K; Memory: 256 KB

Fiber Interface

Type
P/Ns 065-1100/1110/1174: LED
Wavelength
P/Ns 065-1100/1110/1174: 1300 nm nominal (1270 nm max.,1380 nm min.)
Max Output Power
P/Ns 065-1100/1110/1174: -14.0 dBm
Min Output Power
P/Ns 065-1100/1110/1174: -20.0 dBm
Sensitivity
P/Ns 065-1100/1110/1174: -33.0 dBm
Max Input Power
P/Ns 065-1100/1110/1174: -8.0 dBm
Link Power Budget
P/Ns 065-1100/1110/1174: 13.0 dB

Physical Characteristics

Dimensions
4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight
0.33 lb (150 g)

Environmental Requirements

Operating Temperature
32°F to 122°F (0°C to 50°C);
Storage Temperature
-14°F to 158°F (-10°C to 70°C)
Relative Humidity
5% to 95% (non-condensing)

Dokumenty

Data Sheet

Pobierz