Weidmuller
8965450000
1 / 9
Opis
EX signal isolating converter, Safe-input: 4-20mA, Ex output: 4 - 20 mA, 1-channel- Part Number
- 8965450000
£175.64
net1
Metody płatności:
- Najlepsza oferta od:
Zaufany dostawca Automa.Net- Dostępność:
- 40 szt.W magazynieZaktualizowano: 19-11-2024
- Szacowany czas dostawy:
- Na zapytanie
- Stan produktu:
- Fabrycznie Nowe, Zapieczętowane
Fabrycznie Nowe, Zapieczętowane - Nowy, nieużywany, nieotwarty, nieuszkodzony przedmiot w oryginalnym opakowaniu zapieczętowanym przez producenta.
Łącznie 265 części w magazynie od 13 dostawców
Bezpieczny proces płatności
Zasady zwrotów i reklamacji
Zasady wysyłki
Gwarancja
Dostępne Oferty (12)
Oferta z czasem realizacji przez producenta
Wysyłka:Na zapytanie
Najlepsza cena:
€120.10
Probability Of Failure
- MTBF
- 135 Years
- SIL PAPER
- SIL certificate
Approvals
- ROHS
- Conform
- UL File Number Search
- E337701
Dimensions And Weights
- Width
- 22.5 mm
- Width (inches)
- 0.886 inch
- Height
- 119.2 mm
- Height (inches)
- 4.693 inch
- Depth
- 113.6 mm
- Depth (inches)
- 4.472 inch
- Net weight
- 189 g
Safety-Related Specifications Low Demand Mode
- Average Probability of Failure on Demand (PFD
- 2.29 x 10-4 (Tproof = 1 year), 4.37 x 10-4 (Tproof = 2 years), 1.06 x 10-4 (Tproof = 5 year)
Connection Data
- Type of connection
- Screw connection
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.6 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.25 mm²
- Clamping range, max.
- 2.5 mm²
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 12
Rated Data Ul
- UL certificate
- E337701.pdf
Safety-Related Basic Specifications
- Demand mode
- High
- Description of the "safe state"
- analogue Output ≤ 3.6 mA or output ≥ 21 mA
- Device type
- A
- Hardware fault tolerance (HFT)
- 0
- Mean Time To Repair (MTTR)
- 24 h
- Safe Failure Fraction (SFF)
- 85 %
- T
- 5 Years
- Total failure rate for dangerous detected failures (λ
- 127 FIT
- Total failure rate for dangerous undetected failures (λ
- 48 FIT
- Total failure rate for safe detected failures (λ
- 0 FIT
- Total failure rate for safe undetected failures (λ
- 164 FIT
- Safety category
- SIL 2
- Probability of outage PFH
- 4.8 x 10-8 h-1
Tender Specification Sheets
- Long specification
- Ex output isolation amplifier for standard DC current signals, HART transparent1-channel output isolation amplifier in 22.5 mm width with external power supply,for transmitting and isolating standard signals 4 to 20 mA from the safe zone to Ex zones 0,1,2. Status-/ error messages are available via a relay contact (NO).The component can be configured using standard FDT/DTM software.Add-on housing for TS35 rail mountingDimensions: L/W/H 119.2/ 22.5/ 113.6Screw connection/ Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 4...20 mA Output 4...20 mALoad < 600 OhmAccuracy < 0,1 % v.ETemperature coefficient < 0,01% v.E./°C (Tu)Alarm output relay 1 NO contact 250 V AC / 30 V DC @ 2A safe zone 32 V AC @ 0.5 A/ 32 VDC @ 1 A Zone 2Auxiliary power 19...31.2 V DCPower loss approx. 1.8 WAmbient temperature range -20 °C...+60 °CSecure isolation EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each otherWorking voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, ATEX IECEX, FMATEX marking II 3 G ExnA nC IIC T4ATEX characteristic data U0 = 28 V DC I0 = 93 mA DC P0 = 650 mWType ACT20X-SAI-HAO-S
- Short specification
- Ex output isolation amplifier for standard DC current signals, HART transparent1-channel output isolation amplifier in 22.5 mm width with external power supply,for transmitting and isolating standard signals 4 to 20 mA from the safe zone to Ex zones 0,1,2. Status-/ error messages are available via a relay contact (NO).The component can be configured using standard FDT/DTM software.
Alarm Output
- Alarm function
- Signal limit exceeded, Line interruption at the input, No supply voltage, Device error
- Type
- Relay, 1 NO (voltage-free)
- Nominal switching voltage
- ≤ 125 V AC / 110 V DC (safe area)≤ 32 V AC / 32 V DC (zone 2)
- Continuous current
- ≤ 0,5 A AC / 1 A DC (zone 2)
- Power rating
- ≤ 62.5 VA / 32 W (safe area)≤ 16 VA / 32 W (Zone 2)
- Hysteresis
- 0.1 mA (switching threshold)
- Switching thresholds
- 0…29.9 mA (programmable)
Input
- Input current
- 4…20mA
- Input frequency
- 0,5…2,5 kHz @ 3,5…23 mA bi-directional HART® signal
- Voltage drop
- < 2 V
Classifications
- ETIM 6.0
- EC002475
- ETIM 7.0
- EC002475
- EClass 9.0
- 27-21-01-23
- EClass 9.1
- 27-21-01-23
- EClass 10.0
- 27-21-01-23
- UNSPSC
- 30-21-18-01
Output
- Type
- intrinsically safe circuit
- Influence of load resistance
- ≤ 0.01% of span / 100 Ω
- 2-wire supply
- > 14.5 V @ 20 mA
- Output signal limit
- < 28 mA
- Residual ripple (current loop)
- < 7.5 mVeff
- Output current
- 4…20 mA (max. 23 mA)
- Cut-off frequency (-3 dB)
- 0.5…2.5 kHz @ 3.5…23 mA bi-directional HART® signal
- Load impedance current
- ≤ 725 Ω
Product Information
- Product information
- Weidmüller provides an extended guarantee period of 36 months for this device.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Data For Ex Applications (Atex)
- Voltage U
- 28 V DC
- Current I
- 93 mA
- Power P
- < 650 mW
- Marking
- II (1) G [Ex ia Ga] IIC/IIB/IIA, II (1) D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I
- Installation location
- Device installed in safe area, zone 2
Insulation Coordination
- EMC standards
- DIN EN 61326, NE 21
- Insulation voltage
- 2.6 kV (input / output)
- Rated voltage
- 300 V
Input Ex
- Input current
- 4…20mA
- Input frequency
- 0,5…2,5 kHz @ 3,5…23 mA bi-directional HART® signal
- Output signal in case of wire break
- < 1 mA
- Voltage drop
- < 2 V
- Voltage drop not powered
- < 6 V
- Voltage drop powered
- < 2 V
Temperatures
- Humidity
- 0...95 % (no condensation)
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -20 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -20 °C
- Operating temperature
- -20 °C...60 °C
- Storage temperature
- -20 °C...85 °C
Ratings Iecex/Atex/Cul
- ATEX certificate
- 11ATEX0164X.pdf
- IEC Ex certificate
- IECEx certification
- Certificate no. (cULus)
- E337701
General Specifications
- Configuration
- With FDT/DTM software
- Voltage supply
- 19.2…31.2 V DC
- Type of connection
- Screw connection
- Power consumption
- ≤ 1.0 W
- Accuracy
- < 0.1% span
- Temperature coefficient
- < 0.01% of span/°C (TU)
- Step response time
- ≤ 5 ms
- Protection degree
- IP20
- Humidity
- 0...95 % (no condensation)
Powiązane produkty
Inne kategorie
SiłownikiBlokiKable, rury i wężeSprężarkiSterowanieŁączniki i osprzętCylindry i tłokiElektronikaFiltryHVACKomputery przemysłowe i interfejsy HMIOświetlenieTechnika liniowaSilnikiZasilaniePrzeniesienie napęduPompy i zaworyEnergia odnawialnaRobotykaUszczelki, pierścienie i złączaCzujniki i urządzenia pomiaroweNarzędzia i akcesoriaCNCInne