- Rated Service Short-Circuit Breaking Capacity (Ics)
- (230 V AC) 50 kA(250 V DC) 3 Poles in Series 100 kA(400 V AC) 50 kA(440 V AC) 50 kA(500 V AC) 30 kA(690 V AC) 10 kA
- Rated Ultimate Short-Circuit Breaking Capacity (Icu)
- (230 V AC) 50 kA(250 V DC) 100 kA(400 V AC) 50 kA(440 V AC) 50 kA(500 V AC) 30 kA(690 V AC) 10 kA
- Rated Instantaneous Short-Circuit Current Setting (Ii)
- 630 A
- Setting Range
- None
- Rated Operational Power AC-3 (Pe)
- (400 V) Three Phase 22 kW
- Rated Operational Power AC-3e (Pe)
- (400 V) Three Phase 22 kW
- Rated Operational Voltage
- Main Circuit 690 V ACMain Circuit 250 V DC
- Rated Operational Current (Ie)
- 42 A
- Rated Operational Current AC-3 (Ie)
- 42 A
- Rated Operational Current AC-3e (Ie)
- 42 A
- Rated Operational Current DC-5 (Ie)
- 42 A
- Rated Frequency (f)
- Main Circuit 50 HzMain Circuit 60 Hz
- Rated Impulse Withstand Voltage (Uimp)
- Main Circuit 8 kV
- Rated Insulation Voltage (Ui)
- 1000 V
- Power Loss
- 5.47 W
- Number of Poles
- 3
- Conventional Free-air Thermal Current (Ith)
- Main Circuit 42 A
- Degree of Protection
- Housing IP20Main Circuit Terminals IP10
- Pollution Degree
- 3
- Electrical Durability
- 25000 cycle
- Mechanical Durability
- 50000 cycle
- Terminal Type
- Screw Terminals
- Connecting Capacity Main Circuit
- Flexible with Ferrule 1/2x 1 ... 35 mm²Flexible with Insulated Ferrule 1/2x 1 ... 35 mm²Flexible 1/2x 1 ... 35 mm²Rigid 1/2x 1 ... 4 mm²Solid 1/2x 1 ... 4 mm²Stranded 1/2x 1 ... 50 mm²
- Tightening Torque
- Main Circuit 4 N·m
- Wire Stripping Length
- Main Circuit 16 mm
- Recommended Screw Driver
- Pozidriv 2
- Mounting Position
- 1 ... 6
- Mounting on DIN Rail
- TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
- Minimum Mounting Distance
- Electrical Conductive Board, Horizontal - Up to 1000 V 1.5 mmElectrical Conductive Board, Horizontal - Up to 400 V 0 mmElectrical Conductive Board, Horizontal - Up to 690 V 1.5 mmElectrical Conductive Board, Vertical 75 mmOther Device Same Type, Horizontal 0 mmOther Device Same Type, Vertical 150 mm
- Actuator Type
- Rotary Handle
- Contact Position Indication
- ON / OFF / TRIP
- Standards
- CSA 22.2 No. 14IEC/EN 60947-1IEC/EN 60947-2IEC/EN 60947-4-1UL 60947-4-1
- Remarks
- For overload protection of the motors, an appropriate thermal or electronic overload relays must be used