Búsqueda de productos

COUPLING RELAY, AC-3, 4KW/400V, 1NC, DC 24V, 0.7...1.25*US, 3-POLE, SZ S00 SPRING-LOADED TERMINAL

SIMATIC ET 200SP. PROFINET interface module IM 155-6PN Standard. max. 32 I/O modules. and 16 ET 200AL modules. single hot swap. incl. server module (6ES7193-6PA00-0AA0)

MCB UL489 2-POLE 25A D-TRIP TYPE NSJ MINIATURE CIRCUIT-BREAKER 240 V 10 KA, 2-POLE, D, 25 A, D=70 MM ACC. TO UL 489

TERMINAL ALPHA FIX 8WH-UL94-V0_GREY

SINAMICS g120 power module pm250 with built in cl. a filter possibility of regeneration 3AC380-480v +10/-10% 47-63HZ output high overload 11KW for 200% 3s,150% 57s,100% 240s ambient temp -10 to +50 deg c output light overload 15KW for 150% 3s,110% 57s,100% 240s ambient temp -10 to +40 deg c 334 x 189 x 185 (hxwxd), fsc protection IP20 without control unit and bop

SINAMICS V20 1AC200-240V -15/+10% 47-63HZ RATED POWER 3kW WITH 150% OVERLOAD FOR 60SEC INTEGRATED FILTER C1 I/O-INTERFACE: 4DI. 2DO.2AI.1AO FIELDBUS: USS/ MODBUS RTU WITH INBUILT BOP PROTECTION: IP20/ UL OPEN TYPE SIZE:FSAD 176.5x136x160(HXWXD)

CIRCUIT BREAKER 230/400V 6KA, 1POLE, C, 16A

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 80A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 150A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 175A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 7.32 inches deep. It weighs 5.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LC2D65AB7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 65A AC-3 30kW@400V, it includes a 24V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D65AB7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 30kW@400V. It includes a 24V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 119mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 24V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 1.6 million cycles at 65A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Power connections by EverLink BTR screw terminals providing constant tightening pressure.

This product is part of the Lexium 32 range, an offer of servo drives from 0.15kW to 7kW. The motion servo drive features integrated EMC filter. It offers 2 capture discrete inputs and 3 discrete outputs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V, a continuous output current of 3A at 8kHz and a continuous power of 300W at 115V. It is furnished with RJ45 connector (labelled CN7) for Modbus. It offers electrical isolation between power and control. It provides Modbus and SERCOS III communication interface. It is an IP20 rated product. Its dimensions are 68mm (width) x 237mm (depth) x 270mm (height). It weighs 1.8kg. This product is certified by CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BSH (70mm, 1 motor stack). Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

REV. COMB., AC3, 7.5KW/ 400V AC110V, 50/60HZ, 3-POLE, SZ S0 SCREW TERMINAL ELECTR. AND MECH. INTERLOCK 2NO INTEGR.

Contactor relay, 2 NO + 2 NC, 110 V DC, Size S00, screw terminal upright mounting position

Contactor relay, 4NO, AC 24V, 50/60 HZ, size s00, screw terminal

Contactor, AC-3, 15KW/400V, 1NO+1NC, DC 110V, 3-pole, sz s0 screw terminal