Búsqueda de productos

Rev. comb., AC3, 11KW/400V DC24v 3-pole, sz s0 screw terminal electr. and mech. interlock 2NO integr.

SIRIUS SOFT STARTER, VALUES WITH 690 V, 40 DEG., STANDARD: 113A, 110KW, INSIDE-DELTA CIRCUIT 3: ONLY UP TO 600V, 400-690 V AC, 230 V AC, SCREW TERMINALS

CONTACTOR, SIZE 2, 2-POLE DC-3 AND 5,RATD.OPERAT.CURR.32A AUXILIARY CONTACTS 22 (2NO+2NC) AC OPERATION AC 220V 50/60HZ

SINAMICS g120c rated power 2,2KW with 150% overload for 3 sec 3AC380-480v +10/-20% 47-63HZ unfiltered i/o-interface 6di, 2do,1ai,1ao safe torque off integrated fieldbus PROFIBUS-dp protection IP20/ ul open type size fsaa 173x73x155(hxwxd) external 24v

SINAMICS g120d power module pm250d with built in cl. a filter possibility of regeneration 3AC380-480v +10/-10% 47-63HZ output high overload 0,75KW for 200% 3s,150% 60s,100% 300s ambient temp -10 to +55 deg c 210 x 450 x 110 (hxwxd), fsa protection IP65 without control unit

SIEMENS LOW VOLTAGE 3VA UL MOLDED CASE CIRCUIT BREAKER WITH THERMAL - MAGNETIC TRIP UNIT. 3VA52 FRAME WITH HIGH (CLASS H) BREAKING CAPACITY. 175A 2(3)-POLE (25KAIC AT 600V) (65KAIC AT 480V). TM210 TRIP UNIT WITH FIXED Ir FIXED Ii. SPECIAL FEATURES: WITHOUT LUGS. DIMENSIONS (W x H x D) IN: 4.1 x 7.3 x 4.2.

SIEMENS LOW VOLTAGE 3VA UL MOTOR CIRCUIT PROTECTOR WITH THERMAL - MAGNETIC TRIP UNIT. 3VA51 FRAME. 30A 3-POLE (65KA AT 480V). HIGH RANGE TM120M TRIP UNIT WITH ADJUSTABLE Ii. SPECIAL FEATURES: WITHOUT LUGS. DIMENSIONS (W x H x D) IN: 3 x 5.5 x 3.7.

SCREW TERMINALS 400-600 V AC, 115 V AC, COMMON-3: 173A, 150HP, STANDARD: 100A, 75HP, VALUES WITH 575 V, 50 DEG., SIRIUS SOFT STARTER,

SIEMENS LOW VOLTAGE 3VA UL MOLDED CASE CIRCUIT BREAKER WITH THERMAL - MAGNETIC TRIP UNIT. 3VA52 FRAME WITH HIGH (CLASS H) BREAKING CAPACITY. 200A 2(3)-POLE (25KAIC AT 600V) (65KAIC AT 480V). TM230 TRIP UNIT WITH FIXED Ir ADJUSTABLE Ii. SPECIAL FEATURES: WITHOUT LUGS. DIMENSIONS (W x H x D) IN: 4.1 x 7.3 x 4.2.

SUPPLEMENTARY PROTECTOR,3P+N,10A,CURVE D Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 3 + N Pole, 10 Amps, 480 VAC, Trip Characteristic Curve D, 72mm Width, 70mm Depth, UL File E116386 in Vol. 1 Sec. 2

PCB headers, nominal cross section: 0.5 mm², color: green, nominal current: 4 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, number of potentials: 8, number of rows: 1, number of positions: 8, number of connections: 8, product range: MCV 0,5/..-G, pitch: 2.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, number of solder pins per potential: 1, plug-in system: COMBICON FK-MC 0,5, Pin connector pattern alignment: Standard, locking: without, mounting: without, type of packaging: packed in cardboard

PCB headers, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, number of potentials: 18, number of rows: 1, number of positions: 18, number of connections: 18, product range: MCV 1,5/..-GF-LR, pitch: 3.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.4 mm, number of solder pins per potential: 1, plug-in system: COMBICON MC 1,5, Pin connector pattern alignment: Standard, locking: Snap-in locking, mounting: Lock & release threaded flange, type of packaging: packed in cardboard

PCB terminal block, nominal current: 13.5 A, rated voltage (III/2): 320 V, nominal cross section: 1.5 mm², number of potentials: 11, number of rows: 1, number of positions per row: 11, product range: SPT 1,5/..-H-THR, pitch: 5.08 mm, connection method: Push-in spring connection, mounting: THR soldering, conductor/PCB connection direction: 0 °, color: black, Pin layout: Linear double pinning, Solder pin [P]: 2.6 mm, number of solder pins per potential: 2, type of packaging: packed in cardboard

Test terminal strip, nom. voltage: 400 V, connection method: Push-in connection, 1 level, Rated cross section: 6 mm², cross section: 0.5 mm² - 10 mm², mounting type: Wall mounting, color: gray

Electronic circuit breaker, reset input and status output, nominal current: 2 A

Marker card, self-adhesive, labeled with the consecutive numbers: 51 ... 60, 10-section marker strips with 10 identical decades, white, for terminal block width: 7.5 mm

The NH system is classified among plug-in fuse systems and is composed of: fuse-base (possibly including terminal covers and phase barriers) fuse-link with blade contact fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type aM NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.

PCB terminal block, nominal current: 22 A, rated voltage (III/2): 250 V, nominal cross section: 2.5 mm², number of potentials: 2, number of rows: 1, number of positions per row: 2, product range: FKDSO 2,5/..-R, pitch: 5 mm, connection method: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: light grey, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. Product with pin output on right side

Zack marker strip, 10-section, horizontally labeled with the identical number: 23, white, for terminal block width: 5.2 mm

Zack marker strip, 10-section, horizontally labeled with the identical number: 57, white, for terminal block width: 6.2 mm