E6B2-CWZ6C 1000P/R 2M

Ratings / Performance

Encoding method

Incremental

Power supply voltage

DC5 to 24 V (ripple (p-p): 5% max.)

Current consumption

80 mA DC Max.

Inrush current

approx. 9A(Time : approx.0.3ms)

Resolution (Single turn type)

1000 P/R

Output phases

A, B and Z

Control output (Output type)

NPN open collector output

Control output (Load current)

35mA max.(Sink current)

Control output (Residual voltage)

0.4 VDC max.(load current:at 35mA Max.)

Starting positional point

Equipped

Load power supply voltage

30 VDC max.

Max. response frequency

100 kHz

Phase difference on output

90 DEG -45 to +45 DEG

Rise and_fall times of output

Rise time of output: 1 μs max.

Rise and_fall times of output

Fall time of output: 1 μs max.

Rise and_fall times of output

(Output voltage: 5V, load resistance: 1k OHM, cable length: 2m Max.)

Starting torque

Room temperature: 0.98 mN.m max.

Moment of inertia

1 x 10**-6 kg.m**2 max.

Shaft loading

Radial: 30 N

Shaft loading

Thrust: 20 N

Max. permissible rotation

6000 r/min

Mechanical life expectancy

100 million rotations min.

Protective circuit

Output short cut protection

Protective circuit

Power supply reverce polarity protection

Ambient temperature

Operating: -10 to 70 °C

Ambient temperature

Storage: -25 to 85 °C

Ambient humidity

Operating: 35 to 85%RH

Ambient humidity

Storage: 35 to 85%RH

Insulation resistance

20 MOhm min. at 500 VDC between charged parts and the case

Dielectric strength

500 VAC at 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance

10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions

Shock resistance

1000 m/s**2 for 3 times each in X, Y, and Z directions

Degree of protection

IEC60529: IP50

Connection method

Pre-wired models(Cable_length: 2 m)

Material (case)

ABS

Material (body)

Aluminum

Material (shaft)

SUS420J2

Accessories

Instruction manual, coupling and hex-head spanner

Documentos