Accessori generali

This Harmony XAC, double contact block uses screw-clamp terminals and has 1 x NO + 1 changeover contact SPDT single pole double throw. This contact block allows fast and easy replacement and…

The Spacial SF/SM lower cable guide cross rail is a versatile solution designed to facilitate the efficient management of incoming and outgoing cables in electrical enclosures. With a width of 800…

The SITOP SEL1200 Selectivity Module is designed for high-performance applications requiring selective switching of up to four channels. It features a switching characteristic input of 24 V DC/40 A…

TeSys D time delay auxiliary contact block, for contactors LC1D, LC1F and control relays CAD. It provides 1NO+1NC contacts rated up to 10A 690V AC, Off-delay setting range 1-30s, connection by spring…

This insulation accessory is designed for use with Compact NSX 100/160/250 or EasyPact CVS 100/160/250. It serves as a long terminal shield, protecting against direct contact with power circuits…

This Magelis XBTZ is a RS 485 cable for Modbus/Uni-TE serial link. It is equipped with one 8-way female mini-DIN connector at one end and one 25-way male SUB-D connector at the other end. it is 10…

The Micro-Fit 3.0 Vertical Header is engineered for use in demanding industrial environments. This component is designed with a 3.00mm mating interface pitch and supports a maximum current of 8.5A…

This surface mounted housing is designated as Size 10 B and incorporates a double locking lever mechanism. It is constructed from polyamide (PA) reinforced with fibre-glass , ensuring durability and…

The male connector is designed for crimp termination and includes 1 contact along with shielding. It supports a conductor cross-section ranging from 0.14 to 4 mm² and has a rated current of 16 A…

The DFK-PC 5/ 7-ST-7,62 feed-through connector is designed with a nominal cross section of 6 mm² and is capable of handling a nominal current of 41 A and a rated voltage of 1000 V. Its male connector…

The PTS 1,5/ 8-PH-5,0 CLIP is a printed-circuit board connector featuring a nominal cross section of 1.5 mm² and a distinctive green color. It supports a nominal current of 10 A and operates at a…

This feed-through header, designated as DFK-PC 4/ 2-G-7,62-FS4,8 , is designed for efficient electrical connections with a nominal current rating of 15 A and a rated voltage of 400 V. Its compact…

The Relay Module PLC-RPT-110UC/21AU/RW is specifically engineered for railway applications, comprising a basic terminal block equipped with a Push-in connection and a plug-in miniature relay…

The DFLK-D25 SUB/M/FKCT module serves as a bridge for establishing a direct connection between terminal blocks and a D-SUB miniature pin strip, designed to accommodate 25 positions. This product is…

The Type 3 surge protection device, designated as PLT-SEC-T3-120-FM-UT , is designed for single-phase power supply networks with a nominal voltage of 120 V AC/DC. It comprises a protective plug and…

The PP-H 4/ 1-M GNYE plug is designed for use in the railway industry, supporting a nominal voltage of 800 V and a maximum load current of 32 A, achieved with a conductor cross-section of up to 6…

This toggle escutcheon serves as a replacement part for installations on the Compact NSX 400/630, EasyPact CVS 400/630, and PowerPact Multistandard L frame. Designed with a small cut-out, it is…

The product serves as a marking accessory specifically designed for insulated, markable cable ends associated with Linergy TR products. This set comprises a wallet containing 200 green markers that…

The Floor Standing Polyester Enclosure, version PLA, offers a completely sealed design, measuring 500 mm in height, 1000 mm in width, and 320 mm in depth. This enclosure is built with a body composed…

This plinth, compatible with PanelSeT PLA enclosures, serves as a versatile accessory suitable for a variety of applications. With a height of 900 mm and a depth of 1285 mm , it is constructed from…