Accessori generali

The CA-17S1N126L00 is an M23 device connector designed for front mounting applications. It offers a straight configuration and is shielded, ensuring reliable performance in various environments. This…

The PCBM 0,5/ 7-PL-2,5 WH is a printed-circuit board connector designed for reliable connectivity in electronic applications. With a nominal current rating of 6 A and a rated voltage of 160 V , it is…

The EH 22,5-C DS/ABS-PC GY7035 serves as an upper component of a DIN rail housing, characterized by a tall design and dual connection openings. It measures 22.6 mm in width, 75.26 mm in height, and…

The 9007AW limit switch is engineered for precision applications requiring robust performance. This non plug-in, open type switch is equipped with a rotary lever arm and is factory configured for…

This fan is specifically designed for use with Altivar Process 600 and Altivar Process 900 variable speed drives, enhancing their cooling capabilities. It is suitable for power ratings between 110kW…

The yellow silicone bellow seal is specifically designed for compatibility with Harmony XB4 and XB5 mushroom head push buttons, ensuring an effective solution for emergency stop applications. With an…

The A6D-R time-delay fuse offers essential protection for mains, feeders, and branch circuits handling both motor and non-motor loads. With a rated voltage of 600V AC and 600V DC, this Class RK1 fuse…

The Tri-Onic TRS-R series of current-limiting time-delay fuses provides essential overcurrent protection for motors, transformers, service entrance equipment, feeders, and branch circuits. With a…

The Tri-Onic TRS-R fuses are specifically intended for current-limiting applications, offering reliable overcurrent protection for a variety of electrical components including motors, transformers…

The S100X160VAC label is a thermal transfer self-laminating solution tailored for wire and cable applications. Measuring 1.0" x 1.6" (25.4 mm x 40.64 mm), it features a white area for printing and a…

This transformer operates with a single phase and is rated at 8/28.5 kVA. It supports a primary voltage range of 550V down to 208V with a secondary output of two 115V connections. The secondary…

This M12 connector is designed for sensor and actuator applications, featuring a 4-pole configuration and a length of 2 meters. The female socket is straight and constructed from PUR, ensuring…

The Connector set HC-EVO-A10PT-BWS-HH-M20-PLRBK is designed to offer reliable connectivity with a degree of protection of IP66, ensuring resistance to dust and water ingress. It supports 10 positions…

The SACC-DSI-FSD-4CON-L180/SH GN is a 4-position device connector designed for rear mounting with an M12 SPEEDCON interface. This connector is equipped with a green contact carrier and is shielded to…

The PLD M 260 W-85/95 365/D40 is a specialized LED machine light designed for industrial applications. With a supply voltage of 24 V DC and a current consumption of approximately 0.44 A, it provides…

This plug, designated as SPB 2,5/ 1-R BU, operates at a nominal voltage of 500 V and supports a maximum load current of 24 A when using a 4 mm² conductor cross-section. It features a single position…

The connector is designed for board connection with a pitch of 3.5 mm, featuring THT solder connection type. It has a total of 12 poles and a solder pin length of 3.2 mm, with a tolerance of +0.1 /…

The LSF-SMT 7.62/04/180 1.5SN BK TU is a printed circuit board terminal designed for efficient connectivity. This component features a 7.62 mm pitch and accommodates 4 poles with a conductor outlet…

This male header connector is designed for PCB applications, featuring a pitch of 7.62 mm and a closed side configuration. It incorporates a THT solder connection for secure mounting, with a solder…

The GSM modem interface designed for Zelio Logic SR2COM01 supports quad-band frequencies of 900/1800 MHz and 850/1900 MHz, allowing for versatile global communication capabilities. This component…